Prof. Dr. MUHSİN KILIÇ

SUSTAINABILITY , cilt.15, sa.8, 2023 (SCI-Expanded)

Exergoeconomic analysis and multi-objective optimization of ORC configurations via Taguchi-Grey Relational Methods

Heliyon , cilt.9, sa.4, 2023 (SCI-Expanded)

Evaluation of Combined Thermal‒Mechanical Compression Systems: A Review for Energy Efficient Sustainable Cooling

Kılıç M., Mutlu M., Saldamli I. H.

SUSTAINABILITY , cilt.14, sa.21, ss.13724, 2022 (SCI-Expanded)

Numerical Simulation and Analytical Evaluation of the Collection Efficiency of the Particles in a Gas by the Wire-Plate Electrostatic Precipitators

Kılıç M., Mutlu M., Altun A. F.

APPLIED SCIENCES-BASEL , cilt.12, sa.13, 2022 (SCI-Expanded)

Numerical investigation of an air cleaning device performance

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.37, sa.4, ss.2077-2089, 2022 (SCI-Expanded)

A novel design of a dry clutch pressure plate for weight reduction without compromising its thermo-mechanical performance

Kilic M., Cakmak T.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.89, sa.3/4, ss.175-191, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

NOVEL AIR DUCT COOLING PERFORMANCE EVALUATION FOR THE REFRIGERATED PRODUCT TRANSPORT IN A SEMI-TRAILER CABIN

KILIÇ M., Guler T., SEVİLGEN G.

HEAT TRANSFER RESEARCH , cilt.53, sa.5, ss.17-30, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

Comparative performance evaluation of the mechanical and adsorption hybrid cooling systems for the cascaded and the serial connected evaporators configurations

Kılıç M., Anjrini M.

CASE STUDIES IN THERMAL ENGINEERING , cilt.28, 2021 (SCI-Expanded)

Dual-separated cooling channel performance evaluation for high-power led Pcb in automotive headlight

Sevilgen G., Kılıç M., Aktas M.

CASE STUDIES IN THERMAL ENGINEERING , cilt.25, 2021 (SCI-Expanded)

Comparative performance analysis of ORC-VCRC combined systems based on refrigerant selection

SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT , cilt.27, sa.1, ss.70-84, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

THE 1-D ANALYSIS OF COOL DOWN SIMULATION OF VEHICLE HVAC SYSTEM

Sevilgen G., Bayram H., Kilic M.

THERMAL SCIENCE , cilt.25, sa.3, ss.1677-1687, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

Investigation of Thermal Sensation in a Railway Vehicle during Cooling Period

Sevilgen G., Sayaral G., Kılıç M., Bayram H.

TRANSPORTATION RESEARCH RECORD , cilt.2674, sa.10, ss.461-474, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Comparative performance analysis of a combined cooling system with mechanical and adsorption cycles

Kılıç M., Anjrini M.

ENERGY CONVERSION AND MANAGEMENT , cilt.221, 2020 (SCI-Expanded)

Design and performance evaluation based on economics and environmental impact of a PV-wind-diesel and battery standalone power system for various climates in Turkey

RENEWABLE ENERGY , cilt.157, ss.424-443, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Economic feasibility analysis with the parametric dynamic simulation of a single effect solar absorption cooling system for various climatic regions in Turkey

Renewable Energy , cilt.152, ss.75-93, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Thermodynamic performance evaluation of a geothermal ORC power plant

Ünver Ü., Kelesoglu A., Kılıç M.

Renewable Energy , cilt.148, ss.261-274, 2020 (SCI-Expanded)

Thermal Assessment of Laminar Flow Liquid Cooling Blocks for LED Circuit Boards Used in Automotive Headlight Assemblies

Kılıç M., Aktas M., Sevilgen G.

ENERGIES , cilt.13, 2020 (SCI-Expanded)

Estimation of friction surface temperature of a dry clutch

Cakmak T., KILIÇ M.

INTERNATIONAL JOURNAL OF HEAVY VEHICLE SYSTEMS , cilt.27, sa.5, ss.683-702, 2020 (SCI-Expanded)

A NOVEL METHOD FOR PREDICTION OF GAS TURBINE POWER PRODUCTION Degree-Day Method

THERMAL SCIENCE , cilt.22, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Influence of environmental temperature on exergetic parameters of a combined cycle power plant

Ünver Ü., Kılıç M.

INTERNATIONAL JOURNAL OF EXERGY , cilt.22, ss.73-88, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

Adsorption characteristics evaluation of R134A and R404A on different adsorbents

Kılıç M., Gonul E.

BULGARIAN CHEMICAL COMMUNICATIONS , cilt.48, ss.306-311, 2016 (SCI-Expanded)

A novel design of a compressed air storage system with liquid pistons

Kılıç M., Mutlu M.

BULGARIAN CHEMICAL COMMUNICATIONS , cilt.48, ss.318-324, 2016 (SCI-Expanded)

Energy and exergy analysis of a double effect LiBr-H2O and LiCl-H2O chillers

Kılıç M., Ravul H. B.

BULGARIAN CHEMICAL COMMUNICATIONS , cilt.48, ss.312-317, 2016 (SCI-Expanded)

EFFECTS OF PISTON SPEED, COMPRESSION RATIO, AND CYLINDER GEOMETRY ON SYSTEM PERFORMANCE OF A LIQUID PISTON

THERMAL SCIENCE , cilt.20, ss.1953-1961, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

Evaluation of windshield defogging process in an automobile

Mutlu M., Sevilgen G., Kılıç M.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.71, ss.103-121, 2016 (SCI-Expanded)

THREE-DIMENSIONAL CONJUGATE NUMERICAL ANALYSIS OF FIN AND TUBE HEAT EXCHANGERS WITH VARIOUS FIN THERMAL CONDUCTIVITY VALUES AND GEOMETRIC PARAMETERS

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.36, ss.85-98, 2016 (SCI-Expanded)

INVESTIGATION OF TRANSIENT COOLING OF AN AUTOMOBILE CABIN WITH A VIRTUAL MANIKIN UNDER SOLAR RADIATION

THERMAL SCIENCE , cilt.17, ss.397-406, 2013 (SCI-Expanded)

The effective thermal conductivity of insulation materials reinforced with aluminium foil at low temperatures

Yuksel N., Avci A., Kılıç M.

HEAT AND MASS TRANSFER , cilt.48, ss.1569-1574, 2012 (SCI-Expanded)

Experimental investigation of thermal comfort and air quality in an automobile cabin during the cooling period

Kılıç M., Akyol S. M.

HEAT AND MASS TRANSFER , cilt.48, ss.1375-1384, 2012 (SCI-Expanded)

The effects of using different type of inlet vents on the thermal characteristics of the automobile cabin and the human body during cooling period

Özgün Korukçu M., Kılıç M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.60, ss.799-809, 2012 (SCI-Expanded)

THREE DIMENSIONAL NUMERICAL ANALYSIS OF TEMPERATURE DISTRIBUTION IN AN AUTOMOBILE CABIN

SEVİLGEN G., KILIÇ M.

THERMAL SCIENCE , cilt.16, sa.1, ss.321-326, 2012 (SCI-Expanded)

TRANSIENT EFFECTS OF DIFFERENT HEATING MODES ON TEMPERATURE AND HUMIDITY INSIDE THE AUTOMOBILE CABIN DURING HEATING PERIOD

Korukcu M. Ö., KILIÇ M.

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.32, sa.1, ss.101-107, 2012 (SCI-Expanded)

Transient effects of heater on CO2 emissions in an automobile

Scientific Research and Essays , cilt.6, ss.6465-6474, 2011 (SCI-Expanded)

An experimental investigation on interior thermal conditions and human body temperatures during cooling period in automobile

Kılıç M., Kaynakli Ö.

HEAT AND MASS TRANSFER , cilt.47, ss.407-418, 2011 (SCI-Expanded)

Numerical analysis of air flow, heat transfer, moisture transport and thermal comfort in a room heated by two-panel radiators

ENERGY AND BUILDINGS , cilt.43, ss.137-146, 2011 (SCI-Expanded) Sürdürülebilir Kalkınma

The temperature dependence of effective thermal conductivity of the samples of glass wool reinforced with aluminium foil

Yuksel N., Avci A., Kılıç M.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.37, ss.675-680, 2010 (SCI-Expanded)

Dynamic simulation of HVAC system thermal loads in an automobile compartment

Akyol S. M., Kılıç M.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.52, ss.177-198, 2010 (SCI-Expanded)

Editorial

Oeztuerk F., Kilic M.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.52, sa.1, ss.1-2, 2010 (SCI-Expanded)

Transient numerical analysis of airflow and heat transfer in a vehicle cabin during heating period

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.52, ss.144-159, 2010 (SCI-Expanded)

Untitled

Oeztuerk F., Kılıç M.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.52, ss.1-4, 2010 (SCI-Expanded)

The usage of IR thermography for the temperature measurements inside an automobile cabin

Korukcu M. Ö., Kılıç M.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.36, ss.872-877, 2009 (SCI-Expanded)

THE EFFECTS OF USING DIFFERENT VENTILATION MODES DURING HEATING PERIODS OF AN AUTOMOBILE

Kılıç M., Akyol S. M.

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.29, ss.25-36, 2009 (SCI-Expanded)

EVALUATION OF HEAT TRANSFER CHARACTERISTICS IN AN AUTOMOBILE CABIN WITH A VIRTUAL MANIKIN DURING HEATING PERIOD

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS , cilt.56, ss.515-539, 2009 (SCI-Expanded)

Modelling airflow, heat transfer and moisture transport around a standing human body by computational fluid dynamics

Kilic M., Kaynakli Ö., Yamankaradeniz R.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.35, ss.1159-1164, 2008 (SCI-Expanded)

Second law-based thermodynamic analysis of water-lithium bromide absorption refrigeration system

Kilic M., Kaynakli Ö.

ENERGY , cilt.32, sa.8, ss.1505-1512, 2007 (SCI-Expanded)

Second law based thermoeconomic analysis of combined cycle power plants considering the effects of environmental temperature and load variations

Unver U., Kilic M.

International Journal of Energy Research , cilt.31, ss.148-157, 2007 (SCI-Expanded)

Theoretical study on the effect of operating conditions on performance of absorption refrigeration system

Kaynakli Ö., Kilic M.

ENERGY CONVERSION AND MANAGEMENT , cilt.48, ss.599-607, 2007 (SCI-Expanded)

A model for latent heat energy storage systems

Yuksel N., Avci A., Kilic M.

International Journal of Energy Research , cilt.30, sa.14, ss.1146-1157, 2006 (SCI-Expanded)

Determination of required core temperature for thermal comfort with steady-state energy balance method

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.33, ss.199-210, 2006 (SCI-Expanded)

An investigation of thermal comfort inside an automobile during the heating period

Kaynakli Ö., Kilic M.

APPLIED ERGONOMICS , cilt.36, ss.301-312, 2005 (SCI-Expanded)

Thermal comfort during heating and cooling periods in an automobile

Kaynakli Ö., Pulat E., Kilic M.

HEAT AND MASS TRANSFER , cilt.41, ss.449-458, 2005 (SCI-Expanded)

Investigation of indoor thermal comfort under transient conditions

Kaynakli Ö., Kilic M.

BUILDING AND ENVIRONMENT , cilt.40, ss.165-174, 2005 (SCI-Expanded)

Determination of heat transfer rate and nusselt number on the thermal-entry region in ducts

International Communications in Heat and Mass Transfer , cilt.31, ss.181-190, 2004 (SCI-Expanded)

A study on the fire protection of historic Cumalikizik village

Akinciturk N., Kilic M.

Journal of Cultural Heritage , cilt.5, ss.213-219, 2004 (SCI-Expanded) Sürdürülebilir Kalkınma

Evaluating thermal environments for sitting and standing posture

Kaynakli Ö., Unver U., Kilic M.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.30, ss.1179-1188, 2003 (SCI-Expanded) Sürdürülebilir Kalkınma

Computation of flow between two disks rotating at different speeds

Kilic M., Owen J.

Journal of Turbomachinery , cilt.125, ss.394-400, 2003 (SCI-Expanded)

The effect of input temperatures on the absorber parameters

Atmaca İ., Yigit A., Kilic M.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.29, sa.8, ss.1177-1186, 2002 (SCI-Expanded)

Computation of flow and heat transfer in rotating cavities with peripheral flow of cooling air

HEAT TRANSFER IN GAS TURBINE SYSTEMS , cilt.934, ss.513-520, 2001 (SCI-Expanded)

Computation of flow and heat transfer in rotating cavities with peripheral flow of cooling air

Kılıç M.

Annals of the New York Academy of Sciences , cilt.934, ss.513-520, 2001 (SCI-Expanded)

Flow and convective heat transfer in cylindrical reversed flow combustion chambers

International Communications in Heat and Mass Transfer , cilt.23, ss.1151-1161, 1996 (SCI-Expanded)

Turbulent flow between two disks contrarotating at different speeds

Kilic M., Gan X., Owen J.

Journal of Turbomachinery , cilt.118, ss.408-413, 1996 (SCI-Expanded)

Flow between contrarotating disks

Gan X., Kilic M., Owen J.

Journal of Turbomachinery , cilt.117, ss.298-305, 1995 (SCI-Expanded)

Transitional Flow Between Contra-Rotating Disks

Kılıç M., Gan X., Owen J.

Journal of Fluid Mechanics , cilt.281, ss.119-135, 1994 (SCI-Expanded) Sürdürülebilir Kalkınma

Superposed flow between two discs contrarotating at differential speeds

Gan X., Kilic M., Owen J.

International Journal of Heat and Fluid Flow , cilt.15, ss.438-446, 1994 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Gelişmekte olan laminer akışta mini kanallı soğutucu bloğun çok yanıtlı taguchı yöntemi kullanılarak optimizasyonu

Kılıç M., Sevgül Ş.

Uludağ University Journal of The Faculty of Engineering , cilt.24, sa.3, ss.433-450, 2019 (Hakemli Dergi)

Influence of Window Parameters on the Thermal Performance of Office Rooms in Different Climate Zones of Turkey

INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH , cilt.9, ss.226-243, 2019 (ESCI) Sürdürülebilir Kalkınma

Klimatik Kontrollü Treyler İçerisindeki Hava Akışının Optimizasyonu

Güler T., Kılıç M.

Mühendis ve Makina , cilt.60, sa.697, ss.289-302, 2019 (Hakemli Dergi)

DYNAMIC SIMULATION OF A PV/WIND HYBRID POWER GENERATION SYSTEM: CASE STUDY OF BURSA PROVINCE

Uludağ University Journal of The Faculty of Engineering , cilt.24, sa.12, ss.571-582, 2019 (Hakemli Dergi)

Synthesis of knowledge on utilization of adsorption filters for healthy indoor environments

Romanian Journal of Civil Engineering , cilt.10, sa.3, ss.223-229, 2019 (Hakemli Dergi)

Application of Sepiolite-Poly(vinylimidazole) composite for the removal of Cu(II): Thermodynamics and isotherm studies

KARA A., KILIÇ M., TEKİN N., Dinibütün N., ŞAFAKLI A.

International Journal of Chemistry and Technology , cilt.2, sa.1, ss.20-33, 2018 (Hakemli Dergi)

Advances on Heat Pump Applications for Electric Vehicles

Advances in Automotive Engineering, An International Journal , cilt.1, sa.1, ss.79-104, 2018 (Hakemli Dergi)

An investigation of the ammonia adsorption performance on different adsorbents for cooling applications

Bulgarian Chemical Communications , cilt.50, ss.45-52, 2018 (Scopus)

Thermodynamic analysis of basic and regenerative organic Rankine cycles using dry fluids from waste heat recovery

Ozdemir E., Kılıç M.

Journal of Thermal Engineering , cilt.4, sa.5, ss.2381-2393, 2018 (Scopus)

Simulation and thermodynamic analysis of a regenerative and recuperative organic Rankine cycle

Bulgarian Chemical Communications , cilt.50, ss.86-95, 2018 (Scopus)

Comparative performance analysis of a two-bed adsorption cooling system with adsorption of different adsorbates on silica-gel

Kılıç M.

Bulgarian Chemical Communications , cilt.50, ss.102-110, 2018 (Scopus)

Energy and Exergy Analysis of an Organic Rankine Cycle Using Different Working Fluids from Waste Heat Recovery

Özdemir E., Kılıç M.

International Journal of Environmental Trends (IJENT) , cilt.1, sa.1, ss.32-45, 2017 (Hakemli Dergi)

Experimental investigation of R134a adsorption on silica gel for cooling system applications

Kılıç M., Gonul E.

Research on Engineering Structures and Materials , cilt.3, sa.3, ss.192-200, 2017 (Hakemli Dergi)

Experimental and Theoretical Analysis of Headlight Surface Temperature in an Infrared Heated Stress Relieving Oven

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.21, sa.1, ss.99-110, 2016 (Hakemli Dergi)

Experimental and theoretical analysis of an infra red heated stress relieving oven

Uludağ University Journal of The Faculty of Engineering , cilt.21, sa.1, ss.99-110, 2016 (Hakemli Dergi)

Renewable Energy Resources and Sustainability Index

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.18, sa.1, ss.69-79, 2013 (Hakemli Dergi)

OTOMOBİLLERDE ISITMA SÜRECİNDE FARKLI MENFEZ KULLANIMININ ISIL KONFORA ETKİSİ

Kılıç M., Korukçu M. Ö.

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.14, sa.3, ss.1-14, 2012 (Hakemli Dergi)

Tracking hand and facial skin temperatures in an automobile by using IR-thermography during heating period

Korukçu M. Ö., Kılıç M.

Gazi University Journal of Science , cilt.25, ss.207-217, 2012 (Scopus)

Effect of Solar Radiation on Thermal Comfort in an Automobile Cabin

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.18, sa.1, ss.29-35, 2012 (ESCI)

Bina Duvarlarına Uygulanan Isıl Yalıtım Kalınlığının Enerji Maliyeti Odaklı Optimizasyonu

KAYNAKLI Ö., MUTLU M., KILIÇ M.

Tesisat Mühendisliği , sa.156, ss.48-54, 2011 (Hakemli Dergi)

Otomobil Kabini İçerisindeki Hava Hızının Isıl Konfora Etkisinin İncelenmesi

Korukçu M. Ö., Kılıç M.

Sakarya University Journal Of Science , cilt.15, sa.1, ss.60-67, 2011 (Hakemli Dergi)

Otomobil kabininde ısıtma sürecinde ısı transfer karakteristiklerinin farklı ışınım modelleri kullanılarak sayısal olarak karşılaştırılması

Kaynaklı Ö., Ünver Ü., Kılıç M., Yamankaradeniz R.

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.16, sa.1, ss.163-179, 2011 (Hakemli Dergi)

Tersinmez Brayton Çevriminin Maksimum Güç ve Maksimum Güç Yoğunluğu Şartlarında Karşılastırmalı Performans Analizi

Korukçu M. Ö., Kılıç M.

Uludağ Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.10, sa.1, ss.59-70, 2005 (Hakemli Dergi)

Sürekli rejimde ısıl konfor şartlarının modellenmesi

Kaynaklı Ö., Kılıç M.

Anadolu Üniversitesi Bilim ve Teknoloji Dergisi , cilt.4, 2003 (Hakemli Dergi)

Sürekli rejim enerji dengesi modeline göre ısıl konfor bölgeleri

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , cilt.9, sa.1, ss.23-30, 2003 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

PERFORMANCE EVALUATION AND OPTIMIZATION OF HEAT PUMP SYSTEMS WITH DIFFERENT REFRIGERANT SELECTION

Valizada F., Altun A. F., Kılıç M.

The 2nd INTERNATIONAL SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, 16 - 18 Aralık 2024

THERMAL DESIGN OF COOLING BLOCKS PERFORMANCE COMPARISON FOR LI-ION BATTERY BASED LIQUID COOLING SYSTEM

Kaya S., KILIÇ M.

The 2nd INTERNATIONAL SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, 16 Aralık 2024

AZERBAIJAN'S RENEWABLE ENERGY USE, POTENTIAL AND GOALS

The 2nd INTERNATIONAL SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Adana, Türkiye, 16 - 18 Aralık 2024

LITHIUM-ION BATTERIES AND BATTERY FIRES

Gamsız S., KILIÇ M.

The 2nd INTERNATIONAL SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, 16 - 18 Aralık 2024

DEVELOPMENT OF A PYTHON-BASED GRAPHICAL USER INTERFACE FOR OPTIMUM FIN SPACING IN PLANE HEAT SINKS

The 2nd INTERNATIONAL SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Adana, Türkiye, 16 - 18 Aralık 2024

COOLING PERFORMANCE ANALYSIS OF HYBRID COOLER BLOCK USING PHASE CHANGE MATERIAL AND LIQUID COOLING IN COOLING LITHIUM ION BATTERIES

Gamsız S., KILIÇ M.

6TH INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS, 23 - 25 Ağustos 2024

Determination of optimum insulation thickness by using machine learning

Munzur international scientific research and innovation congress, 6 - 07 Ağustos 2024

THERMODYNAMIC PERFORMANCE EVALUATION OF SUBCRITICAL AND TRANSCRITICAL CO2 REFRIGERATION CYCLES FOR INDOOR APPLICATIONS

KILIÇ M., KAYNAKLI Ö., Yüksel A. F., TOPAL O.

12th Global Conference on Global Warming (GCGW-2024), Urfa, Türkiye, 16 Mayıs 2024, ss.455-458

Numerical analysis of flow over tilted square

Alınca Z. N., Gamsız S., Kılıç M.

Munzur international scientific research and innovation congress, Tunceli, Türkiye, 6 - 08 Ağustos 2024, ss.1006-1014

THERMODYNAMIC ANALYSIS OF SIMPLE AND PRE-COOLED LINDE-HAMPSON AIR LIQUEFACTION SYSTEMS

Kılıç M., Altun A. F.

12th Global Conference on Global Warming (GCGW-2024), Şanlıurfa, Türkiye, 16 - 19 Mayıs 2024

Dynamic Modeling of a Compressed Natural Gas Refueling Station

Özcan F., Kılıç M.

14th International Exergy, Energy, and Environment Symposium, İstanbul, Türkiye, 24 - 27 Aralık 2023, ss.161-164

Prediction of Thermodynamic Properties for Compressed Natural Gas Mixtures

Özcan F., Kılıç M.

14th International Exergy, Energy, and Environment Symposium, İstanbul, Türkiye, 24 - 27 Aralık 2023, ss.619-622

Thermodynamic Analysis of Desalination System on Combined Cycle Power Plants Through Throttling Process Method by Using a Vapor Compressor

Zikri A., Kılıç M., Özcan F.

14th International Exergy, Energy, and Environment Symposium, İstanbul, Türkiye, 24 - 27 Aralık 2023, ss.157-160

Thermodynamic Analysis of Triple-Level Desalination System on Dual-Level Binary Geothermal Power Plant By Using Heat Waste on the Condenser and A Brine Reinjected Into the Ground

KILIÇ M., Zikri A., ALTUN A. F., Dzaky M. I.

7. Uluslararası Öğrenci Bilimler Kongresi, İstanbul, Türkiye, 15 Aralık 2023

Comparison of the direct and indirect cooling systems on the thermal management of the EV Batteries

Öztürk Y. E., Kılıç M.

Fourteenth International Conference on Thermal Engineering: Theory and Applications, Yalova, Türkiye, 25 Mayıs 2023, ss.1-3

OPTIMIZATION OF THE COLD PLATE USED IN ELECTRIC VEHICLE BATTERY COOLING WITH GREY RELATION ANALYSIS

4 th INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS, Rize, Türkiye, 6 - 08 Haziran 2023

ENERGY AND EXERGY ANALYSIS OF FOUR DIFFERENT ORGANIC RANKINE CYCLE CONFIGURATIONS WITH WASTE HEAT SOURCES

ÖZDEMİR KÜÇÜK E., KILIÇ M.

4 th INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS, Türkiye, 06 Haziran 2023

NUMERICAL AND EXPERIMENTAL APPROACHES FOR THE EFFECT OF THE CHARACTERISTIC LENGTH IN NATURAL CONVECTION

Öztürk Y. E., KILIÇ M.

EUROASIA Congress on Scientific Researches and Recent Trends-XI, Türkiye, 21 Haziran 2023

Ambulans kabini havasının ısıtılmasının sayısal ve deneysel olarak incelenmesi

KILIÇ M., Yurdakul C.

III. International Conference on Global Practice of Multidisciplinary Scientific Studies, Baku, Azerbaycan, 15 Kasım - 17 Aralık 2022, ss.766-777

Ambulans kabini havasının ısıtılma sürecinin incelenmesi

KILIÇ M., Yurdakul C.

International Conference on Engineering Sciences, Kıbrıs (Kktc), 11 Kasım - 13 Aralık 2022, ss.267-277

ELEKTRİKLİ ARAÇLARDA ISITMASOĞUTMA SİSTEMİ VE ENERJİ YÖNETİMİNİN MODELLENMESİ

KILIÇ M., UÇAN B.

7. ULUSLARARASI 19 MAYIS YENİLİKÇİ BİLİMSEL YAKLAŞIMLAR KONGRESİ, Samsun, Türkiye, 19 Mayıs 2022

The effect of blade structure and position in the radial fan impeller

Kılıç M., Fidan S.

2nd International Congress of Engineering and Natural Sciences Studies, Ankara, Türkiye, 07 Mayıs 2022, cilt.1, ss.53

Comparative investigations of a mechanical and adsorption integrated refrigeration system performances using ammonia with different adsorbents

Anjrini M., Kılıç M., Altun A. F.

The Sixth International Hydrogen Technologies Congress (IHTEC-2022), Çanakkale, Türkiye, 23 - 26 Ocak 2022, ss.6-10

Dynamic modelling of off-grid hybrid energy systems with different energy storage options by using either battery or hydrogen production

The Sixth International Hydrogen Technologies Congress (IHTEC-2022), Çanakkale, Türkiye, 23 - 26 Ocak 2022, ss.1-5 Sürdürülebilir Kalkınma

MODELLING OF INDOOR AIR QUALITY IN A ROOM WITH AN AIR CLEANER

Mutlu M., Altun A. F., Kılıç M.

ULIBTK’21 Uluslararası Katılımlı 23. Isı Bilimi ve Tekniği Kongresi, 08-10 Eylül 2021, GAZİANTEP, Gaziantep, Türkiye, 8 - 10 Eylül 2021, cilt.2, ss.1506-1513

THE EFFECT OF THE UV AIR CLEANING DEVICES ON THE INDOOR AIR QUALITY

Altun A. F., Kılıç M., Mutlu M.

23. ISI BİLİMİ VE TEKNİĞİ KONGRESİ 23rd CONGRESS ON THERMAL SCIENCE AND TECHNOLOGY, Gaziantep, Türkiye, 8 - 10 Eylül 2021, ss.1-5

NUMERICAL SIMULATION ON THE COLLECTION EFFICIENCY OF THE PARTICLES IN THE AIR BY THE WIRE-PLATEELECTROSTATIC PRECIPITATORS

Kılıç M., Mutlu M., Altun A. F.

15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (ATE-HEFAT 2021), Johannesburg, Güney Afrika, 26 - 28 Temmuz 2021, ss.1672-1676

EXPERIMENTAL EVALUATION OF CIGARETTE SMOKE REMOVAL PERFORMANCE OF VARIOUS INDOOR AIR CLEANING DEVICES

Kılıç M., Mutlu M., Altun A. F.

The 15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2021), 26 - 28 Temmuz 2021, ss.875-878 Sürdürülebilir Kalkınma

EXPERIMENTAL EVALUATION OF CIGARETTE SMOKE REMOVAL PERFORMANCE OF VARIOUS INDOOR AIR CLEANING DEVICES

KILIÇ M., MUTLU M., ALTUN A. F.

15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (ATE-HEFAT 2021), Güney Afrika, 26 - 28 Temmuz 2021, ss.875-878

The effect of duct shape on the heat dissipation performance of ventilated clutch pressure plate

Çakmak T., Sevilgen G., Kılıç M., Pehlivan A. K.

Recent Innovations in Engineering and Technology, Tamil Nadu, Hindistan, 4 - 05 Aralık 2020, ss.1-5

Thermal investigations of the intermediate heat exchanger of the combined refrigeration system

Anjrini M., KILIÇ M.

Alternative Energy Sources, Materials Technologies (AESMT’20), Varna, Bulgaristan, 8 - 09 Haziran 2020, ss.55-56

Dynamic simulation and economic analysis of a hybrid stand-alone power system with hydrogen production and storage for various climates in Turkey.

Alternative Energy Sources, Materials Technologies (AESMT’20), Varna, Bulgaristan, 8 - 09 Haziran 2020, ss.71-72 Sürdürülebilir Kalkınma

Dynamic simulation and thermo-economic optimization of a hybrid stand-alone power system forvarious climates in Turkey

Alternative Energy Sources, Materials Technologies (AESMT’20), Varna, Bulgaristan, 8 - 09 Haziran 2020, ss.41-42

Comparative Performance Analysis of Two-Bed Adsorption Cooling System Using Water Vapor Adsorption on Different Types of Silica Gel

Anjrini M., Kılıç M.

35th International Physics Congress (TPS35), Muğla, Türkiye, 4 - 08 Eylül 2019, cilt.1, ss.355-363

Design and Performance Evaluation of Liquid Cooling Blocks with Fins for Led Circuit Boards Used in Automotive Lighting Systems

Aktaş M., Sevilgen G., Kılıç M.

22nd Congress on Thermal Science and Technology, Kocaeli, Türkiye, 11 - 14 Eylül 2019, cilt.1, ss.430-436

Thermodynamic Analysis of Combined Organic Rankine Cycle and Vapor Compression Refrigeration Cycle Using Low Grade Thermal Energy

Özdemir E., Kılıç M.

22nd Congress on Thermal Science and Technology, Kocaeli, Türkiye, 11 - 14 Eylül 2019, cilt.1, ss.31-40

Wind Energy Generation and Potential Assessment of Armutlu District

22nd Congress on Thermal Science and Technology, Kocaeli, Türkiye, 11 - 14 Eylül 2019, cilt.1, ss.41-46

Utilization of electrostatic precipitators for healthy indoor environments

13th REHVA World Congress, CLIMA 2019, Bucharest, Romanya, 26 - 29 Mayıs 2019, cilt.111 Sürdürülebilir Kalkınma

Dynamic simulation and parametric study of a single effect solar absorption cooling system

Alternative Energy Sources, Materials Technologies (AESMT’19), Sofya, Bulgaristan, 3 - 04 Haziran 2019, cilt.1, ss.9-10

Energy and exergy analysis of a real geothermal ORC power plant

Alternative Energy Sources, Materials Technologies (AESMT’19), Sofija, Bulgaristan, 3 - 04 Haziran 2019, cilt.1, ss.35-36

Air Source Heat Pump System Simulations of Electric Vehicles

Alternative Energy Sources, Materials Technologies (AESMT’19), Bursa, Türkiye, 3 - 04 Haziran 2019

1D Analysis of Soaking and Cool Down Simulations

Sevilgen G., Bayram H., Kılıç M.

Alternative Energy Sources, Materials Technologies (AESMT’19), Sofija, Bulgaristan, 3 - 04 Haziran 2019, ss.1-5

Utilization of electrostatic precipitators for healthy indoor environments.

REHVA 13th HVAC World Congress (CLIMA 2019), Bükreş, Romanya, 26 - 29 Mayıs 2019, ss.1-7

Synthesis of knowledge on utilization of adsorption filters for healthy indoor environments.

REHVA 13th HVAC World Congress (CLIMA 2019), Bucuresti, Romanya, 26 - 29 Mayıs 2019, ss.223-229

Thermodynamic analysis of a combined organicrankine cycle and vapor compression refrigeratıon cycle for different working fluids.

ZEUGMA II. Uluslararası Multidisipliner Çalışmalar Kongresi, Gaziantep, Türkiye, 18 - 20 Ocak 2019, cilt.1, ss.1628-1641

The design and economic analysis of the shell-tube type heat exchanger for energy recovery from waste fluid in industry

ZEUGMA II. Uluslararası Multidisipliner Çalışmalar Kongresi, Gaziantep, Türkiye, 18 - 20 Ocak 2019, cilt.1, ss.1642-1654

Liquid Cooling Performance of the Single and Multi Led Circuit Boards Used in Automotive Lighting Systems

KILIÇ M., Aktas M., SEVİLGEN G.

4th International Conference on Smart and Sustainable Technologies (SpliTech), Hırvatistan, 18 - 21 Haziran 2019, ss.175-179

Simulation and thermodynamic analysis of an organic Rankine cycle configuration.

Alternative Energy Sources, Materials Technologies (AESMT’18), Plovdiv, Bulgaristan, 14 Mayıs - 15 Nisan 2018, cilt.50, ss.86-95

Comparative performance analysis of a two-bed adsorption cooling system with adsorption of different adsorbates on silica-gel.

KILIÇ M.

Alternative Energy Sources, Materials Technologies (AESMT’18), Plovdiv, Bulgaristan, 14 - 15 Mayıs 2018, cilt.50, ss.102-110

An investigation of the ammonia adsorption performance on different adsorbents for cooling applications.

Alternative Energy Sources, Materials Technologies (AESMT’18), Plovdiv, Bulgaristan, 14 - 15 Mayıs 2018, cilt.50, ss.45-52

Renewable Energy Integration in Urban Systems: Case Study of Armutlu District.

3rd Conference of Interdisciplinary Research on Real Estate (2018 CIRRE Conference), Groningen, Hollanda, 20 - 21 Eylül 2018, ss.197-209 Sürdürülebilir Kalkınma

Thermodynamic analysis and working fluid selection of a cogeneration system driven by renewable energy.

Alternative Energy Sources, Materials Technologies (AESMT’18), Plovdiv, Bulgaristan, 14 - 15 Mayıs 2018, ss.29 Sürdürülebilir Kalkınma

Heat transfer enhancement in dry clutch pressure plate using ventilation channels

Çakmak T., Sevilgen G., Kılıç M.

OTEKON 2018, 9th International Automotive Technologies Congress, Bursa, Türkiye, 7 - 08 Mayıs 2018, cilt.1, ss.1134-1140

Klimatik kontrollü treyler içerisindeki hava akışının homojen sıcaklık dağılımı elde etmek amacıyla optimizasyonu.

Güler T., KILIÇ M., Özcan E.

9th International Automotive Technologies Congress, Bursa, Türkiye, 7 - 08 Mayıs 2018, cilt.1, ss.492-502 Sürdürülebilir Kalkınma

The numerical and experimental investigation of the thermal performance of led circuit boards used in automotive lighting systems

Kılıç M., Aktaş M., Sevilgen G., Kaya Ş.

OTEKON 2018, 9th International Automotive Technologies Congress, Bursa, Türkiye, 7 - 08 Mayıs 2018, cilt.1, ss.1127-1133

Theoretical and experimental investigation of heat transfer in a shell and tube heat exchanger

OTEKON 2018, 9th International Automotive Technologies Congress, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.130-139

A cfd study on cooling period of a railway vehicle

Gürcan S., Bayram H., Sevilgen G., Kılıç M.

OTEKON 2018, 9th International Automotive Technologies Congress, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.1747-1753

Geçmişten günümüze otomobil aydınlatma sistemleri

Şentürk S., Altun A. F., Sevilgen G., Kılıç M.

OTEKON 2018, 9th International Automotive Technologies Congress, Bursa, Türkiye, 7 - 08 Mayıs 2018, cilt.1, ss.1844

Energy efficiency analysis of residental buildings through transient simulation.

(PT2018) 5th International Academic Conference on Places and Technologies, Belgrade, Sırbistan Ve Karadağ, 26 - 27 Nisan 2018, cilt.1, ss.332-339 Sürdürülebilir Kalkınma

Geothermal district heating systems design: Case study of Armutlu district.

(PT2018) 5th International Academic Conference on Places and Technologies, Belgrade, Sırbistan Ve Karadağ, 26 - 27 Nisan 2018, cilt.1, ss.148-156 Sürdürülebilir Kalkınma

Performance analysis of a combined organic rankine cycle and vapor compression cycle for using different refrigerants.

(AES 2018) 4th Anatolian Energy Symposium with International Participation, Edirne, Türkiye, 18 - 20 Nisan 2018, cilt.1

Bursa ilindeki bir konutun klima sistemi ile ısıtılmasının dinamik modellenmesi.

MUTLU M., Çalışkan E., KILIÇ M.

(AES 2018) 4th Anatolian Energy Symposium with International Participation, Edirne, Türkiye, 18 - 20 Nisan 2018

Merkezi ısıtma sistemlerinin farklı çalışma sıcaklıkları için incelenmesi: Bir üniversite kampüsü tasarımı örneği.

(AES 2018) 4th Anatolian Energy Symposium with International Participation, Edirne, Türkiye, 18 - 20 Nisan 2018 Sürdürülebilir Kalkınma

Design of an Inlet Air-Cooling System for a Gas Turbine Power Plant

Unver U., Mert M. S., Direk M., Yuksel F., KILIÇ M.

7th International Exergy, Energy and Environmental Symposium (IEEES), Valenciennes, Fransa, 27 - 30 Nisan 2015, ss.1089-1100

Liquid Cooling Applications On Automotive Exterior LED Lighting

Aktas M., Senyuz T., Senyildiz T., KILIÇ M.

33rd International Physics Congress of the Turkish-Physical-Society (TPS), Bodrum, Türkiye, 6 - 10 Eylül 2017, cilt.1935

Achieving Sustainable Buildings via Energy Efficiency Retrofit: Case Study of a Hotel Building

KILIÇ M., ALTUN A. F.

3rd International Sustainable Buildings Symposium (ISBS), U ARAB EMIRATES, 15 - 17 Mart 2017, cilt.7, ss.97-107 Sürdürülebilir Kalkınma

A Comparative Experimental Study of the Thermal Performance of a Brazed Plate and a Double Pipe Heat Exchanger

3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 19 - 21 Aralık 2017

A comparative experimental study of the thermal performance of a brazed plate and a double pipe heat exchanger

BAYRAM H., SEVİLGEN G., KILIÇ M.

Third International Conference on Advances in Mechanical Engineering :ICAME 2017, İstanbul, Türkiye, 19 - 21 Aralık 2017, ss.777-785

Energy and exergy analysis of an Organic Rankine Cycle using different working fluids from waste heat recovery.

Ünver Ü., Keleşoğlu A., Kılıç M.

International Conference on Engineering Technologies, Konya, Türkiye, 7 - 09 Aralık 2017, ss.689-695

Application of Sepiolite-Poly(vinylimidazole) composite for the removal of Cu(II) from aqueous solution: Isotherm and thermodynamics studies

KARA A., TEKİN N., KILIÇ M., Dinibütün N., ŞAFAKLI A.

PPM 2017, The International Porous and Powder Materials Symposium and Exhibition, Kuşadası, Turkey, 12 - 15 Eylül 2017

Liquid cooling applications on automotive led lighting

Aktaş M., KILIÇ M., Şenyüz T., Şenyıldız T.

Turkish Physical Society 33rd International Physics Congress, Bodrum, Türkiye, 6 - 10 Eylül 2017, ss.373

Clutch Transient Heat Transfer Simulation for Hill Start Vehicle Test Condition

Çakmak T., KILIÇ M.

13th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2017), Portoroz, Slovenya, 17 - 19 Temmuz 2017, cilt.1, ss.847-851

An Experimental Study on Adsorption Characteristics of R134a and R404a onto Silicagel Adsorbents

KILIÇ M., Gönül E.

13th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2017), Portoroz, Slovenya, 17 - 19 Temmuz 2017, cilt.1, ss.52-58

Utilization of Degree Day Method to Determine the Theoretical Maximum Production Potential of a Gas Turbine

2nd International Multidisciplinary Conference on Computer and Energy Science (SpliTech 2017), Split, Hırvatistan, 12 - 14 Temmuz 2017, ss.1-8

Tekstil sanayinde atık ısıdan enerji tasarrufunda gövde-boru tipi ısı değiştirici tasarımı ve maliyet analizi

2nd International Congress on Engineering, Architecture and Design, Kocaeli, Türkiye, 12 - 13 Mayıs 2017, cilt.1, ss.753-754

Comparative analysis of central heating systems working with different flow temperature ranges: A case study of a university campus.

1st International Conference on Energy and Thermal Engineering, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.837

Thermodynamic analysis of basic and regenerative organic rankine cycles using dry fluids from waste heat recovery

(ICTE 2017) 1st International Conference on Energy and Thermal Engineering, İstanbul, Türkiye, 25 - 28 Nisan 2017, cilt.1, ss.224-232

NANO INSULATION MATERIALS FOR BUILDING APPLICATIONS

INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING, İstanbul, Türkiye, 25 - 28 Nisan 2017

Nano insulation materials for building energy efficiency

1st International Conference on Energy and Thermal Engineering, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.25-28 Sürdürülebilir Kalkınma

Otomobil Kabinleri İçerisinde Isıl Konfor Konusundaki Gelişmeler

13. Ulusal Tesisat Mühendisliği Kongresi, İzmir, Türkiye, 19 - 22 Nisan 2017, cilt.1, ss.1129-1135

TÜRKİYE’DE KONUT SEKTÖRÜNDE UZUN DÖNEMLİENERJİ TALEP PROJEKSİYONLARI VEDEĞERLENDİRİLMESİ

13. Ulusal Tesisat Mühendisliği Kongresi, Türkiye, 19 - 22 Nisan 2017, cilt.1, ss.667-677

Achieving sustainable buildings via energy efficiency retrofit: case study of a hotel building

KILIÇ M., ALTUN A. F.

3rd International Sustainable Buildings Symposium, Dubai, Birleşik Arap Emirlikleri, 15 - 17 Mart 2017 Sürdürülebilir Kalkınma

Energy and exergy analysis of a double effect LiBr H2O and LiCl H2O chillers

KILIÇ M., Ravul H. B.

XV International Scientific Conference Renewable Energy & Innovative Technologies (RE&IT- 2016), Smolyan, Bulgaristan, 10 - 11 Haziran 2016, cilt.48, ss.312-317

A novel design of a compressed air storage system with liquid pistons

KILIÇ M., Mutlu M.

XV International Scientific Conference Renewable Energy & Innovative Technologies (RE&IT- 2016), Smolyan, Bulgaristan, 10 - 11 Haziran 2016, cilt.48, ss.318-324

Clutch pressure plate compactness effect on the clutch system heat dissipation

Kılıç M., Çakmak T., Sevilgen G.

12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2016), Malaga, İspanya, 10 - 13 Temmuz 2016, ss.438-444

Adsorption characteristics evaluation of R134a and R404a on different adsorbents

KILIÇ M., Gönül E.

XV International Scientific Conference Renewable Energy &Innovative Technologies (RE&IT- 2016), Bulgaristan, 10 - 11 Haziran 2016, cilt.48, ss.306-311

TRANSIENT THERMAL CFD ANALYSIS OF A DRY CLUTCH SYSTEM

Çakmak T., Sevilgen G., Kılıç M.

OTEKON 2016, Bursa, Türkiye, 23 - 24 Mayıs 2016

OTOMOBİL SÜRÜCÜSÜNÜN SÜREKLİ REJİMDEKİ YEREL ISIL ALGISININ ÜÇ BOYUTLU SAYISAL İNCELENMESİ

Mutlu M., Sevilgen G., Kılıç M.

OTEKON 2016, Bursa, Türkiye, 23 - 24 Mayıs 2016

HEAT PUMP APPLICATIONS IN AUTOMOTIVE AIR CONDITIONING SYSTEMS

OTEKON 2016, Bursa, Türkiye, 23 - 24 Mayıs 2016

Adsorption Properties of Silica Gel R134a Pair for Use in Cooling Systems

Gönül E., KILIÇ M.

8th International Ege Energy Symposium & Exhibition, Afyon, Türkiye, 11 - 13 Mayıs 2016, ss.228-233

A Study on Energy Consumption Audit and Improving Energy Efficiency in an Industrial Plant

Çakmak T., KILIÇ M.

8th International Ege Energy Symposium & Exhibition, Afyon, Türkiye, 11 - 13 Mayıs 2016, ss.277-281 Sürdürülebilir Kalkınma

Long Term Energy Demand and Supply Projections and Evaulations for Turkey

8th International Exergy, Energy and Environment Symposium(IEEES-8), Antalya, Türkiye, 1 - 04 Mayıs 2016

ACHIEVING SUSTAINABLE BUILDINGS VIA ENERGY EFFICIENCY RETROFIT A CASE STUDY OF AN INDUSTRIAL BUILDING

KILIÇ M., ALTUN A. F.

8th InternationalExergy, Energy and Environment Symposium (IEEES 2016), Antalya, Türkiye, 1 - 04 Mayıs 2016, ss.416-421 Sürdürülebilir Kalkınma

A study on adsorption characteristics of activated carbon R134a and activated carbon R404a pairs

KILIÇ M., Gönül E.

(IEEES-8) 8th International Exergy, Energy and Environment Symposium, Antalya, Türkiye, 1 - 04 Mayıs 2016

Long Term Energy Demand And Supply Projections and Evaluations for Turkey

KILIÇ M., KAMIŞ KOCABIÇAK Z., ERZAN TOPÇU E., Mutlu M.

(IEEES-8) 8th International Exergy, Energy and Environment Symposium, Antalya, Türkiye, 1 - 04 Mayıs 2016, ss.56-63

FOTOVOLTAİK SİSTEMLERİN EKONOMİK ANALİZİ: TÜRKİYE’DEKİ BİR MÜSTAKİL KONUT ÖRNEĞİ

MUTLU M., KILIÇ M.

3. Anadolu Enerji Sempozyumu, Türkiye, 1 - 03 Ekim 2015, cilt.1, ss.284-291 Sürdürülebilir Kalkınma

SIVI PİSTON İLE HAVA SIKIŞTIRMA VE GENİŞLEME SÜRECİNİN MATEMATİKSEL MODELLENMESİ

MUTLU M., KILIÇ M.

20. Ulusal Isı Bilimi ve Tekniği Kongresi, Türkiye, 2 - 05 Eylül 2015, ss.674-681

Design of an Inlet Air Cooling System for a Gas Turbine Power Plant

Ünver Ü., Mert M. S., Direk M., Yüksel F., Kılıç M.

7th International Exergy, Energy and Environment Symposium, Valence, Fransa, 27 - 30 Nisan 2015, ss.1-8

Adsorpsiyonlu Isı Pompaları İçin Farklı Adsorban Malzemelerin Geliştirilmesi ve Fizikokimyasal Uygulamaları

KARA A., KILIÇ M., Dinibütün N., Gönül E.

Kromatografi 2015, 15. Ulusal Kromatografi Kongresi, Uşak, Türkiye, 8 - 10 Nisan 2015

Mathematical modeling of a small scale compressed air energy storage system(Bu bildiri 2014 yılında Progress in Exergy, Energy, and the Environment isimli kitapta bölüm olarak yayınlanmıştır.)

Sixth International Exergy, Energy andEnvironment Symposium (IEEES-6), Rize, Türkiye, 1 - 04 Temmuz 2013, ss.999-1008

Investigation of humidity effects on the thermal comfort and heat balance of the body

Kaynaklı Ö., Mutlu M., Atmaca İ., Kılıç M.

The Sixth International Exergy, Energy and Environment Symposium (IEEES-6), Kayseri, Türkiye, 1 - 04 Temmuz 2013, ss.560-568

MATHEMATICAL MODELING OF A SMALL SCALE COMPRESSED AIR ENERGY STORAGE SYSTEM

KILIÇ M., KAMIŞ KOCABIÇAK Z., ERZAN TOPÇU E., Mutlu M.

The Sixth International Exergy, Energy and Environment Symposium, Rize, Türkiye, 1 - 04 Temmuz 2013, ss.1063-1072

Fotovoltaik Sistemler için Depolama Sistemlerinin Karşılaştırılması

MUTLU M., KILIÇ M.

2.Anadolu Sempozyumu, Fransa, 01 Mayıs 2013 Sürdürülebilir Kalkınma

Sıkıştırılmış Hava İle Elektrik Enerjisi Depolama Sistemi

KILIÇ M., KAMIŞ KOCABIÇAK Z., ERZAN TOPÇU E., MUTLU M., ÖZCAN F.

Uludağ Üniversitesi II. Bilgilendirme ve Ar-Ge Günleri, Bursa, Türkiye, 13 - 15 Kasım 2012

Küçük ölçekli hidro-pnömatik bir enerji depolama sisteminin tasarımı ve modellenmesi

KILIÇ M., ERZAN TOPÇU E., KAMIŞ KOCABIÇAK Z., TEKİN İ., Mutlu M., ÖZCAN F.

Uludağ Üniversitesi II. Bilgilendirme ve Ar-Ge Günleri, Bursa, Türkiye, 13 - 15 Kasım 2012

Değişik Yapı Bileşenleri Kullanılarak Yerden Isıtma Yapılan Bir Ofis İçerisindeki Konfor Koşullarının Sayısal Analizi

Korukçu M. Ö., Mutlu M., Kılıç M.

1. Ulusal İklimlendirme Soğutma Eğitimi Sempozyumu, Balıkesir, Türkiye, 13 - 15 Eylül 2012, ss.795-804

Soğutma Sürecinde Otomobil Kabini İçerisindeki İç Hava Kalitesinin İncelenmesi

6. Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 4 - 05 Haziran 2012, ss.1-6

Yerden Isıtma Yapılan Bir Ofis İçerisindeki Konfor Koşullarının Sayısal Analizi

Korukçu M. Ö., Kılıç M., Fan J.

10. Uluslararası Yapıda Tesisat Teknolojisi Sempozyumu, İstanbul, Türkiye, 30 Nisan - 02 Mayıs 2012, ss.466-477

Bursa İlinde Rüzgar Enerjisi Potansiyeli ve Kullanımı

Rüzgar Enerjisi ve Türbinleri Yerel Sempozyumu, Bandırma, Türkiye, 11 - 12 Mart 2011, ss.73-78

İçinde Oturan İnsan Olan Radyatörle Isıtılan Bir Odadaki Isıl Konfor Akış Ve Isı Transferinin Üç Boyutlu Sayısal Analizi

IX. Ulusal Tesisat Mühendsiliği Kongresi(TESKON2009), İzmir, Türkiye, 6 - 09 Mayıs 2009, ss.559-568

Otomobil Kabini İçerisindeki Yüzeylerin anlık Sıcaklık Dağılımlarının Termografik Yöntemle Belirlenmesi

KILIÇ M., KORUKÇU M. Ö.

4. Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 1 - 04 Haziran 2008, ss.517-521 Sürdürülebilir Kalkınma

Otomobil Kabini İçerisindeki CO2 Yayınımının İncelenmesi

4. Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 1 - 04 Haziran 2008, ss.271-278

Sıcak Rüzgarların Yüz Sıcaklığına Etkisinin Deneysel İncelenmesi

8. Uluslararası Yapıda Tesisat ve Teknolojileri Sempozyumu, İstanbul, Türkiye, 12 - 14 Mayıs 2008, ss.238-246

İnsan Vücudundan ortama taşınım ışınım ve nem transferi ile gerçekleşen ısı transferinin birleşik modellemeyle üç boyutlu sayısal çözümlemesi