Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Numerical investigation of an air cleaning device performance

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.37, no.4, pp.2077-2089, 2022 (SCI-Expanded) Creative Commons License identifier identifier

Comparative performance analysis of ORC-VCRC combined systems based on refrigerant selection

SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT, vol.27, no.1, pp.70-84, 2021 (SCI-Expanded) identifier identifier

Estimation of friction surface temperature of a dry clutch

INTERNATIONAL JOURNAL OF HEAVY VEHICLE SYSTEMS, vol.27, no.5, pp.683-702, 2020 (SCI-Expanded) identifier identifier

A novel design of a compressed air storage system with liquid pistons

BULGARIAN CHEMICAL COMMUNICATIONS, vol.48, pp.318-324, 2016 (SCI-Expanded) Creative Commons License Sustainable Development identifier

Evaluation of windshield defogging process in an automobile

INTERNATIONAL JOURNAL OF VEHICLE DESIGN, vol.71, pp.103-121, 2016 (SCI-Expanded) identifier identifier

Energy and exergy analysis of a double effect LiBr-H2O and LiCl-H2O chillers

BULGARIAN CHEMICAL COMMUNICATIONS, vol.48, pp.312-317, 2016 (SCI-Expanded) Creative Commons License Sustainable Development identifier

Adsorption characteristics evaluation of R134A and R404A on different adsorbents

BULGARIAN CHEMICAL COMMUNICATIONS, vol.48, pp.306-311, 2016 (SCI-Expanded) Creative Commons License identifier

TRANSIENT EFFECTS OF DIFFERENT HEATING MODES ON TEMPERATURE AND HUMIDITY INSIDE THE AUTOMOBILE CABIN DURING HEATING PERIOD

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, vol.32, no.1, pp.101-107, 2012 (SCI-Expanded) identifier identifier

Transient effects of heater on CO2 emissions in an automobile

Scientific Research and Essays, vol.6, pp.6465-6474, 2011 (SCI-Expanded) identifier

Editorial

INTERNATIONAL JOURNAL OF VEHICLE DESIGN, vol.52, no.1, pp.1-2, 2010 (SCI-Expanded) identifier

Dynamic simulation of HVAC system thermal loads in an automobile compartment

INTERNATIONAL JOURNAL OF VEHICLE DESIGN, vol.52, pp.177-198, 2010 (SCI-Expanded) identifier identifier

Untitled

INTERNATIONAL JOURNAL OF VEHICLE DESIGN, vol.52, pp.1-4, 2010 (SCI-Expanded) identifier

The usage of IR thermography for the temperature measurements inside an automobile cabin

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.36, pp.872-877, 2009 (SCI-Expanded) identifier identifier

THE EFFECTS OF USING DIFFERENT VENTILATION MODES DURING HEATING PERIODS OF AN AUTOMOBILE

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, vol.29, pp.25-36, 2009 (SCI-Expanded) identifier identifier

Modelling airflow, heat transfer and moisture transport around a standing human body by computational fluid dynamics

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.35, pp.1159-1164, 2008 (SCI-Expanded) identifier identifier

A model for latent heat energy storage systems

International Journal of Energy Research, vol.30, no.14, pp.1146-1157, 2006 (SCI-Expanded) identifier identifier

Investigation of indoor thermal comfort under transient conditions

BUILDING AND ENVIRONMENT, vol.40, pp.165-174, 2005 (SCI-Expanded) identifier identifier

Determination of heat transfer rate and nusselt number on the thermal-entry region in ducts

International Communications in Heat and Mass Transfer, vol.31, pp.181-190, 2004 (SCI-Expanded) identifier identifier

A study on the fire protection of historic Cumalikizik village

Journal of Cultural Heritage, vol.5, pp.213-219, 2004 (SCI-Expanded) Sustainable Development identifier identifier

Evaluating thermal environments for sitting and standing posture

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.30, pp.1179-1188, 2003 (SCI-Expanded) Sustainable Development identifier identifier

Computation of flow between two disks rotating at different speeds

Journal of Turbomachinery, vol.125, pp.394-400, 2003 (SCI-Expanded) identifier identifier

The effect of input temperatures on the absorber parameters

International Communications in Heat and Mass Transfer, vol.29, pp.1177-1186, 2002 (SCI-Expanded) identifier identifier

Computation of flow and heat transfer in rotating cavities with peripheral flow of cooling air

HEAT TRANSFER IN GAS TURBINE SYSTEMS, vol.934, pp.513-520, 2001 (SCI-Expanded) identifier

Computation of flow and heat transfer in rotating cavities with peripheral flow of cooling air

Annals of the New York Academy of Sciences, vol.934, pp.513-520, 2001 (SCI-Expanded) identifier identifier

Flow and convective heat transfer in cylindrical reversed flow combustion chambers

International Communications in Heat and Mass Transfer, vol.23, pp.1151-1161, 1996 (SCI-Expanded) identifier identifier

Turbulent flow between two disks contrarotating at different speeds

Journal of Turbomachinery, vol.118, pp.408-413, 1996 (SCI-Expanded) identifier identifier

Flow between contrarotating disks

Journal of Turbomachinery, vol.117, pp.298-305, 1995 (SCI-Expanded) identifier identifier

Superposed flow between two discs contrarotating at differential speeds

International Journal of Heat and Fluid Flow, vol.15, pp.438-446, 1994 (SCI-Expanded) identifier identifier

Transitional Flow Between Contra-Rotating Disks

Journal of Fluid Mechanics, vol.281, pp.119-135, 1994 (SCI-Expanded) Sustainable Development identifier identifier

Articles Published in Other Journals

Gelişmekte olan laminer akışta mini kanallı soğutucu bloğun çok yanıtlı taguchı yöntemi kullanılarak optimizasyonu

Uludağ University Journal of The Faculty of Engineering, vol.24, no.3, pp.433-450, 2019 (Peer-Reviewed Journal)

Klimatik Kontrollü Treyler İçerisindeki Hava Akışının Optimizasyonu

Mühendis ve Makina, vol.60, no.697, pp.289-302, 2019 (Peer-Reviewed Journal)

DYNAMIC SIMULATION OF A PV/WIND HYBRID POWER GENERATION SYSTEM: CASE STUDY OF BURSA PROVINCE

Uludağ University Journal of The Faculty of Engineering, vol.24, no.12, pp.571-582, 2019 (Peer-Reviewed Journal) Creative Commons License Sustainable Development

Synthesis of knowledge on utilization of adsorption filters for healthy indoor environments

Romanian Journal of Civil Engineering, vol.10, no.3, pp.223-229, 2019 (Peer-Reviewed Journal)

Advances on Heat Pump Applications for Electric Vehicles

Advances in Automotive Engineering, An International Journal, vol.1, no.1, pp.79-104, 2018 (Peer-Reviewed Journal)

Energy and Exergy Analysis of an Organic Rankine Cycle Using Different Working Fluids from Waste Heat Recovery

International Journal of Environmental Trends (IJENT), vol.1, no.1, pp.32-45, 2017 (Peer-Reviewed Journal)

Experimental investigation of R134a adsorption on silica gel for cooling system applications

Research on Engineering Structures and Materials, vol.3, no.3, pp.192-200, 2017 (Peer-Reviewed Journal) Creative Commons License

Experimental and Theoretical Analysis of Headlight Surface Temperature in an Infrared Heated Stress Relieving Oven

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, vol.21, no.1, pp.99-110, 2016 (Peer-Reviewed Journal) Creative Commons License

Experimental and theoretical analysis of an infra red heated stress relieving oven

Uludağ University Journal of The Faculty of Engineering, vol.21, no.1, pp.99-110, 2016 (Peer-Reviewed Journal)

Renewable Energy Resources and Sustainability Index

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, vol.18, no.1, pp.69-79, 2013 (Peer-Reviewed Journal) Creative Commons License Sustainable Development

OTOMOBİLLERDE ISITMA SÜRECİNDE FARKLI MENFEZ KULLANIMININ ISIL KONFORA ETKİSİ

Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, vol.14, no.3, pp.1-14, 2012 (Peer-Reviewed Journal)

Effect of Solar Radiation on Thermal Comfort in an Automobile Cabin

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, vol.18, no.1, pp.29-35, 2012 (ESCI) identifier

Otomobillerde Isıtma Sürecinde Farklı Menfez Kullanımının Isıl Konfora Etkisi

Dokuz Eylül University Journal of Engineering Sciences, vol.14, 2012 (Peer-Reviewed Journal)

Otomobil Kabini İçerisindeki Hava Hızının Isıl Konfora Etkisinin İncelenmesi

Sakarya University Journal Of Science, vol.15, no.1, pp.60-67, 2011 (Peer-Reviewed Journal) Creative Commons License

Tersinmez Brayton Çevriminin Maksimum Güç ve Maksimum Güç Yoğunluğu Şartlarında Karşılastırmalı Performans Analizi

Uludağ Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, vol.10, no.1, pp.59-70, 2005 (Peer-Reviewed Journal)

Sürekli rejimde ısıl konfor şartlarının modellenmesi

Anadolu Üniversitesi Bilim ve Teknoloji Dergisi, vol.4, 2003 (Peer-Reviewed Journal)

Sürekli rejim enerji dengesi modeline göre ısıl konfor bölgeleri

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol.9, no.1, pp.23-30, 2003 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

ELEKTRİKLİ ARAÇLARDA ISITMASOĞUTMA SİSTEMİ VE ENERJİ YÖNETİMİNİN MODELLENMESİ

7. ULUSLARARASI 19 MAYIS YENİLİKÇİ BİLİMSEL YAKLAŞIMLAR KONGRESİ, Samsun, Turkey, 19 May 2022

The effect of blade structure and position in the radial fan impeller

2nd International Congress of Engineering and Natural Sciences Studies, Ankara, Turkey, 07 May 2022, vol.1, pp.53

Dynamic modelling of off-grid hybrid energy systems with different energy storage options by using either battery or hydrogen production

The Sixth International Hydrogen Technologies Congress (IHTEC-2022), Çanakkale, Turkey, 23 - 26 January 2022, pp.1-5 Sustainable Development

Comparative investigations of a mechanical and adsorption integrated refrigeration system performances using ammonia with different adsorbents

The Sixth International Hydrogen Technologies Congress (IHTEC-2022), Çanakkale, Turkey, 23 - 26 January 2022, pp.6-10

MODELLING OF INDOOR AIR QUALITY IN A ROOM WITH AN AIR CLEANER

ULIBTK’21 Uluslararası Katılımlı 23. Isı Bilimi ve Tekniği Kongresi, 08-10 Eylül 2021, GAZİANTEP, Gaziantep, Turkey, 8 - 10 September 2021, vol.2, pp.1506-1513

THE EFFECT OF THE UV AIR CLEANING DEVICES ON THE INDOOR AIR QUALITY

23. ISI BİLİMİ VE TEKNİĞİ KONGRESİ 23rd CONGRESS ON THERMAL SCIENCE AND TECHNOLOGY, Gaziantep, Turkey, 8 - 10 September 2021, pp.1-5

NUMERICAL SIMULATION ON THE COLLECTION EFFICIENCY OF THE PARTICLES IN THE AIR BY THE WIRE-PLATEELECTROSTATIC PRECIPITATORS

15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (ATE-HEFAT 2021), Johannesburg, South Africa, 26 - 28 July 2021, pp.1672-1676

EXPERIMENTAL EVALUATION OF CIGARETTE SMOKE REMOVAL PERFORMANCE OF VARIOUS INDOOR AIR CLEANING DEVICES

15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (ATE-HEFAT 2021), South Africa, 26 - 28 July 2021, pp.875-878 Creative Commons License Sustainable Development

EXPERIMENTAL EVALUATION OF CIGARETTE SMOKE REMOVAL PERFORMANCE OF VARIOUS INDOOR AIR CLEANING DEVICES

The 15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2021), 26 - 28 July 2021, pp.875-878 Sustainable Development

The effect of duct shape on the heat dissipation performance of ventilated clutch pressure plate

Recent Innovations in Engineering and Technology, Tamil Nadu, India, 4 - 05 December 2020, pp.1-5

Thermal investigations of the intermediate heat exchanger of the combined refrigeration system

Alternative Energy Sources, Materials Technologies (AESMT’20), Varna, Bulgaria, 8 - 09 June 2020, pp.55-56

Dynamic simulation and thermo-economic optimization of a hybrid stand-alone power system forvarious climates in Turkey

Alternative Energy Sources, Materials Technologies (AESMT’20), Varna, Bulgaria, 8 - 09 June 2020, pp.41-42

Design and Performance Evaluation of Liquid Cooling Blocks with Fins for Led Circuit Boards Used in Automotive Lighting Systems

22nd Congress on Thermal Science and Technology, Kocaeli, Turkey, 11 - 14 September 2019, vol.1, pp.430-436

Thermodynamic Analysis of Combined Organic Rankine Cycle and Vapor Compression Refrigeration Cycle Using Low Grade Thermal Energy

22nd Congress on Thermal Science and Technology, Kocaeli, Turkey, 11 - 14 September 2019, vol.1, pp.31-40

Wind Energy Generation and Potential Assessment of Armutlu District

22nd Congress on Thermal Science and Technology, Kocaeli, Turkey, 11 - 14 September 2019, vol.1, pp.41-46

Utilization of electrostatic precipitators for healthy indoor environments

13th REHVA World Congress, CLIMA 2019, Bucharest, Romania, 26 - 29 May 2019, vol.111 Sustainable Development identifier

Dynamic simulation and parametric study of a single effect solar absorption cooling system

Alternative Energy Sources, Materials Technologies (AESMT’19), Sofya, Bulgaria, 3 - 04 June 2019, vol.1, pp.9-10

Energy and exergy analysis of a real geothermal ORC power plant

Alternative Energy Sources, Materials Technologies (AESMT’19), Sofija, Bulgaria, 3 - 04 June 2019, vol.1, pp.35-36

1D Analysis of Soaking and Cool Down Simulations

Alternative Energy Sources, Materials Technologies (AESMT’19), Sofija, Bulgaria, 3 - 04 June 2019, pp.1-5

Air Source Heat Pump System Simulations of Electric Vehicles

Alternative Energy Sources, Materials Technologies (AESMT’19), Bursa, Turkey, 3 - 04 June 2019

Utilization of electrostatic precipitators for healthy indoor environments.

REHVA 13th HVAC World Congress (CLIMA 2019), Bükreş, Romania, 26 - 29 May 2019, pp.1-7 identifier

Synthesis of knowledge on utilization of adsorption filters for healthy indoor environments.

REHVA 13th HVAC World Congress (CLIMA 2019), Bucuresti, Romania, 26 - 29 May 2019, pp.223-229

The design and economic analysis of the shell-tube type heat exchanger for energy recovery from waste fluid in industry

ZEUGMA II. Uluslararası Multidisipliner Çalışmalar Kongresi, Gaziantep, Turkey, 18 - 20 January 2019, vol.1, pp.1642-1654

Thermodynamic analysis of a combined organicrankine cycle and vapor compression refrigeratıon cycle for different working fluids.

ZEUGMA II. Uluslararası Multidisipliner Çalışmalar Kongresi, Gaziantep, Turkey, 18 - 20 January 2019, vol.1, pp.1628-1641

Liquid Cooling Performance of the Single and Multi Led Circuit Boards Used in Automotive Lighting Systems

4th International Conference on Smart and Sustainable Technologies (SpliTech), Croatia, 18 - 21 June 2019, pp.175-179 identifier identifier

An investigation of the ammonia adsorption performance on different adsorbents for cooling applications.

Alternative Energy Sources, Materials Technologies (AESMT’18), Plovdiv, Bulgaria, 14 - 15 May 2018, vol.50, pp.45-52

Simulation and thermodynamic analysis of an organic Rankine cycle configuration.

Alternative Energy Sources, Materials Technologies (AESMT’18), Plovdiv, Bulgaria, 14 May - 15 April 2018, vol.50, pp.86-95

Comparative performance analysis of a two-bed adsorption cooling system with adsorption of different adsorbates on silica-gel.

Alternative Energy Sources, Materials Technologies (AESMT’18), Plovdiv, Bulgaria, 14 - 15 May 2018, vol.50, pp.102-110

Renewable Energy Integration in Urban Systems: Case Study of Armutlu District.

3rd Conference of Interdisciplinary Research on Real Estate (2018 CIRRE Conference), Groningen, Netherlands, 20 - 21 September 2018, pp.197-209 Sustainable Development

Thermodynamic analysis and working fluid selection of a cogeneration system driven by renewable energy.

Alternative Energy Sources, Materials Technologies (AESMT’18), Plovdiv, Bulgaria, 14 - 15 May 2018, pp.29 Sustainable Development

Geçmişten günümüze otomobil aydınlatma sistemleri

OTEKON 2018, 9th International Automotive Technologies Congress, Bursa, Turkey, 7 - 08 May 2018, vol.1, pp.1844

Theoretical and experimental investigation of heat transfer in a shell and tube heat exchanger

OTEKON 2018, 9th International Automotive Technologies Congress, Bursa, Turkey, 7 - 08 May 2018, pp.130-139

A cfd study on cooling period of a railway vehicle

OTEKON 2018, 9th International Automotive Technologies Congress, Bursa, Turkey, 7 - 08 May 2018, pp.1747-1753

The numerical and experimental investigation of the thermal performance of led circuit boards used in automotive lighting systems

OTEKON 2018, 9th International Automotive Technologies Congress, Bursa, Turkey, 7 - 08 May 2018, vol.1, pp.1127-1133

Heat transfer enhancement in dry clutch pressure plate using ventilation channels

OTEKON 2018, 9th International Automotive Technologies Congress, Bursa, Turkey, 7 - 08 May 2018, vol.1, pp.1134-1140

Geothermal district heating systems design: Case study of Armutlu district.

(PT2018) 5th International Academic Conference on Places and Technologies, Belgrade, Serbia And Montenegro, 26 - 27 April 2018, vol.1, pp.148-156 Sustainable Development

Energy efficiency analysis of residental buildings through transient simulation.

(PT2018) 5th International Academic Conference on Places and Technologies, Belgrade, Serbia And Montenegro, 26 - 27 April 2018, vol.1, pp.332-339 Sustainable Development

Performance analysis of a combined organic rankine cycle and vapor compression cycle for using different refrigerants.

(AES 2018) 4th Anatolian Energy Symposium with International Participation, Edirne, Turkey, 18 - 20 April 2018, vol.1

Bursa ilindeki bir konutun klima sistemi ile ısıtılmasının dinamik modellenmesi.

(AES 2018) 4th Anatolian Energy Symposium with International Participation, Edirne, Turkey, 18 - 20 April 2018

Merkezi ısıtma sistemlerinin farklı çalışma sıcaklıkları için incelenmesi: Bir üniversite kampüsü tasarımı örneği.

(AES 2018) 4th Anatolian Energy Symposium with International Participation, Edirne, Turkey, 18 - 20 April 2018 Sustainable Development

Liquid Cooling Applications On Automotive Exterior LED Lighting

33rd International Physics Congress of the Turkish-Physical-Society (TPS), Bodrum, Turkey, 6 - 10 September 2017, vol.1935 identifier identifier

Achieving Sustainable Buildings via Energy Efficiency Retrofit: Case Study of a Hotel Building

3rd International Sustainable Buildings Symposium (ISBS), U ARAB EMIRATES, 15 - 17 March 2017, vol.7, pp.97-107 Sustainable Development identifier

Design of an Inlet Air-Cooling System for a Gas Turbine Power Plant

7th International Exergy, Energy and Environmental Symposium (IEEES), Valenciennes, France, 27 - 30 April 2015, pp.1089-1100 identifier

A Comparative Experimental Study of the Thermal Performance of a Brazed Plate and a Double Pipe Heat Exchanger

3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Turkey, 19 - 21 December 2017

A comparative experimental study of the thermal performance of a brazed plate and a double pipe heat exchanger

Third International Conference on Advances in Mechanical Engineering :ICAME 2017, İstanbul, Turkey, 19 - 21 December 2017, pp.777-785

Energy and exergy analysis of an Organic Rankine Cycle using different working fluids from waste heat recovery.

International Conference on Engineering Technologies, Konya, Turkey, 7 - 09 December 2017, pp.689-695

Liquid cooling applications on automotive led lighting

Turkish Physical Society 33rd International Physics Congress, Bodrum, Turkey, 6 - 10 September 2017, pp.373

An Experimental Study on Adsorption Characteristics of R134a and R404a onto Silicagel Adsorbents

13th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2017), Portoroz, Slovenia, 17 - 19 July 2017, vol.1, pp.52-58

Clutch Transient Heat Transfer Simulation for Hill Start Vehicle Test Condition

13th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2017), Portoroz, Slovenia, 17 - 19 July 2017, vol.1, pp.847-851

Utilization of Degree Day Method to Determine the Theoretical Maximum Production Potential of a Gas Turbine

2nd International Multidisciplinary Conference on Computer and Energy Science (SpliTech 2017), Split, Croatia, 12 - 14 July 2017, pp.1-8

Tekstil sanayinde atık ısıdan enerji tasarrufunda gövde-boru tipi ısı değiştirici tasarımı ve maliyet analizi

2nd International Congress on Engineering, Architecture and Design, Kocaeli, Turkey, 12 - 13 May 2017, vol.1, pp.753-754

Thermodynamic analysis of basic and regenerative organic rankine cycles using dry fluids from waste heat recovery

(ICTE 2017) 1st International Conference on Energy and Thermal Engineering, İstanbul, Turkey, 25 - 28 April 2017, vol.1, pp.224-232

Nano insulation materials for building energy efficiency

1st International Conference on Energy and Thermal Engineering, İstanbul, Turkey, 25 - 28 April 2017, pp.25-28 Sustainable Development

Comparative analysis of central heating systems working with different flow temperature ranges: A case study of a university campus.

1st International Conference on Energy and Thermal Engineering, İstanbul, Turkey, 25 - 28 April 2017, pp.837

TÜRKİYE’DE KONUT SEKTÖRÜNDE UZUN DÖNEMLİENERJİ TALEP PROJEKSİYONLARI VEDEĞERLENDİRİLMESİ

13. Ulusal Tesisat Mühendisliği Kongresi, Turkey, 19 - 22 April 2017, vol.1, pp.667-677

Otomobil Kabinleri İçerisinde Isıl Konfor Konusundaki Gelişmeler

13. Ulusal Tesisat Mühendisliği Kongresi, İzmir, Turkey, 19 - 22 April 2017, vol.1, pp.1129-1135

Achieving sustainable buildings via energy efficiency retrofit: case study of a hotel building

3rd International Sustainable Buildings Symposium, Dubai, United Arab Emirates, 15 - 17 March 2017 Sustainable Development

A novel design of a compressed air storage system with liquid pistons

XV International Scientific Conference Renewable Energy & Innovative Technologies (RE&IT- 2016), Smolyan, Bulgaria, 10 - 11 June 2016, vol.48, pp.318-324

Energy and exergy analysis of a double effect LiBr H2O and LiCl H2O chillers

XV International Scientific Conference Renewable Energy & Innovative Technologies (RE&IT- 2016), Smolyan, Bulgaria, 10 - 11 June 2016, vol.48, pp.312-317

Clutch pressure plate compactness effect on the clutch system heat dissipation

12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2016), Malaga, Spain, 10 - 13 July 2016, pp.438-444

Adsorption characteristics evaluation of R134a and R404a on different adsorbents

XV International Scientific Conference Renewable Energy &Innovative Technologies (RE&IT- 2016), Bulgaria, 10 - 11 June 2016, vol.48, pp.306-311

Adsorption Properties of Silica Gel R134a Pair for Use in Cooling Systems

8th International Ege Energy Symposium & Exhibition, Afyon, Turkey, 11 - 13 May 2016, pp.228-233

A Study on Energy Consumption Audit and Improving Energy Efficiency in an Industrial Plant

8th International Ege Energy Symposium & Exhibition, Afyon, Turkey, 11 - 13 May 2016, pp.277-281 Sustainable Development

Long Term Energy Demand and Supply Projections and Evaulations for Turkey

8th International Exergy, Energy and Environment Symposium(IEEES-8), Antalya, Turkey, 1 - 04 May 2016

A study on adsorption characteristics of activated carbon R134a and activated carbon R404a pairs

(IEEES-8) 8th International Exergy, Energy and Environment Symposium, Antalya, Turkey, 1 - 04 May 2016

Long Term Energy Demand And Supply Projections and Evaluations for Turkey

(IEEES-8) 8th International Exergy, Energy and Environment Symposium, Antalya, Turkey, 1 - 04 May 2016, pp.56-63

ACHIEVING SUSTAINABLE BUILDINGS VIA ENERGY EFFICIENCY RETROFIT A CASE STUDY OF AN INDUSTRIAL BUILDING

8th InternationalExergy, Energy and Environment Symposium (IEEES 2016), Antalya, Turkey, 1 - 04 May 2016, pp.416-421 Sustainable Development

SIVI PİSTON İLE HAVA SIKIŞTIRMA VE GENİŞLEME SÜRECİNİN MATEMATİKSEL MODELLENMESİ

20. Ulusal Isı Bilimi ve Tekniği Kongresi, Turkey, 2 - 05 September 2015, pp.674-681

Design of an Inlet Air Cooling System for a Gas Turbine Power Plant

7th International Exergy, Energy and Environment Symposium, Valence, France, 27 - 30 April 2015, pp.1-8

MATHEMATICAL MODELING OF A SMALL SCALE COMPRESSED AIR ENERGY STORAGE SYSTEM

The Sixth International Exergy, Energy and Environment Symposium, Rize, Turkey, 1 - 04 July 2013, pp.1063-1072

Investigation of humidity effects on the thermal comfort and heat balance of the body

The Sixth International Exergy, Energy and Environment Symposium (IEEES-6), Kayseri, Turkey, 1 - 04 July 2013, pp.560-568

Sıkıştırılmış Hava İle Elektrik Enerjisi Depolama Sistemi

Uludağ Üniversitesi II. Bilgilendirme ve Ar-Ge Günleri, Bursa, Turkey, 13 - 15 November 2012

Değişik Yapı Bileşenleri Kullanılarak Yerden Isıtma Yapılan Bir Ofis İçerisindeki Konfor Koşullarının Sayısal Analizi

1. Ulusal İklimlendirme Soğutma Eğitimi Sempozyumu, Balıkesir, Turkey, 13 - 15 September 2012, pp.795-804

Yerden Isıtma Yapılan Bir Ofis İçerisindeki Konfor Koşullarının Sayısal Analizi

10. Uluslararası Yapıda Tesisat Teknolojisi Sempozyumu, İstanbul, Turkey, 30 April - 02 May 2012, pp.466-477

Bursa İlinde Rüzgar Enerjisi Potansiyeli ve Kullanımı

Rüzgar Enerjisi ve Türbinleri Yerel Sempozyumu, Bandırma, Turkey, 11 - 12 March 2011, pp.73-78

Otomobil Kabini İçerisindeki CO2 Yayınımının İncelenmesi

4. Otomotiv Teknolojileri Kongresi, Bursa, Turkey, 1 - 04 June 2008, pp.271-278

Sıcak Rüzgarların Yüz Sıcaklığına Etkisinin Deneysel İncelenmesi

8. Uluslararası Yapıda Tesisat ve Teknolojileri Sempozyumu, İstanbul, Turkey, 12 - 14 May 2008, pp.238-246

Computation of heat transfer for two discs rotating at different speeds

2003 ASME Turbo Expo, Atlanta, GA, United States Of America, 16 - 19 June 2003, pp.889-897 identifier

Exergy Analysis of a Lithium Bromide Water Absorption Refrigeration System

IEEES-1 The First International Exergy, Energy and Environment Symposium, France, 13 - 17 July 2003

Calculation of Thermal Comfort Zones with the Ambient Parameters

IEEES-1 The First International Exergy, Energy and Environment Symposium, Paris, France, 13 - 17 July 2003, pp.769-773

Computation of Heat Transfer Between Two Discs Rotating at Different Speeds

ASME/IGTI TURBO EXPO 2003, Atlanta, United States Of America, 16 - 19 June 2003 identifier

Computation of flow between two discs rotating at different speeds

ASME TURBO EXPO 2002: Heat Transfer, Manufacturing Materials and Metallurgy, Amsterdam, Netherlands, 3 - 06 June 2002, pp.749-760 identifier

Otomobil içinde ısıtma ve soğutma süreçlerinde ısıl konforun simülasyonu

OTEKON’02 Otomotiv Teknolojileri Kongresi, Bursa, Turkey, 24 - 26 June 2002, pp.161-0

Ters Akışlı Kazanlarda Brülör Namlusu Dalma Uzunluğunun Isı Taşınımına Etkisi

10. Ulusal Isı Bilimi ve Tekniği Kongresi, Turkey, 6 - 08 September 1995, vol.2, pp.1199-1205

Computation of Flow in Rotating Disc Systems

Proceedings of the 1992 International Symposium on Heat Transfer in Turbomachinery, Mesolongion, Greece, 24 - 28 August 1994, pp.577-590

Turbulent flow between two discs contra-rotating at differential speeds

ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition, GT 1994, The Hague, Netherlands, 13 - 16 June 1994, vol.1 identifier

Turbulent flow between two discs contra-rotating at differential speeds

Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition, Hague, Neth, 13 - 16 June 1994, pp.1-8 identifier

Flow and Heat Transfer Between Gas Turbine Discs

AGARD-CP-527, France, 12 - 16 October 1992, pp.25-0

Flow between contra-rotating discs

International Gas Turbine and Aeroengine Congress and Exposition, Cincinnati, OH, USA, 24 - 27 May 1993, pp.1-10 identifier

Flow between contra-rotating discs

ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition, GT 1993, Ohio, United States Of America, 24 - 27 May 1993 identifier

Books & Book Chapters

FARKLI AERODİNAMİK KANAT YAPILARININ SAYISAL ANALİZİ

in: MÜHENDİSLİK ALANINDA ULUSLARARASI ARAŞTIRMALAR V, Prof. Dr. Servet Soygüder, Editor, Eğitim Yayınevi, Konya, pp.19-37, 2022

Long-Term Energy Demand and Supply Projections and Evaluations for Turkey

in: Exergetic, Energetic and Environmental Dimensions, Dinçer İ.,Colpan,C.O.,Kızılkan O., Editor, Elsevier Science, Oxford/Amsterdam , London, pp.115-132, 2018

: Long Term Energy Demand and Supply Projections and Evaluations for Turkey

in: Exergetic, Energetic and Environmental Dimensions, Dinçer, İ., Colpan, C.O. and Kızılkan, O., Editor, Elsevier-Academic Press, London, pp.115-132, 2018

Achieving Sustainable Buildings via Energy Efficiency Retrofit: Case Study of a Hotel Building

in: Lecture Notes in Civil Engineering, Fırat S., Kinuthia J., Abu-Tair A., Editor, Springer, Cham, pp.97-107, 2018

Achieving Green Building Standards via Energy Efficiency Retrofit: A Case Study of an Industrial Facility

in: Exergetic, Energetic and Environmental Dimensions, Dinçer,İ.,Colpan,C.O. and Kızılkan,O., Editor, Elsevier Science, Oxford/Amsterdam , London, pp.97-107, 2018

An Experimental Study on Adsorption Characteristics of R134a and R404a onto Granular and Pellet Type Activated Carbon

in: Exergetic, Energetic and Environmental Dimensions, Dinçer,İ.,Colpan,C.O. and Kızılkan,O., Editor, Elsevier Science, Oxford/Amsterdam , London, pp.751-761, 2018

Design of an Inlet Air-Cooling System for a Gas Turbine Power Plant

in: Exergy for A Better Environment and Improved Sustainability 1, Aloui F.,Dincer I., Editor, Springer, London/Berlin , Berlin, pp.1089-1100, 2018

Investigation of Humidity Effects on the Thermal Comfort and Heat Balance of the Body

in: Progress in Exergy, Energy, and the Environment, Dinçer,İ.,Midilli,A. and Küçük,A., Editor, Springer, London/Berlin , Berlin, pp.421-434, 2014

Three-Dimensional Numerical Analysis of Thermal Output of a Steel Panel Radiator

in: Progress in Exergy, Energy, and the Environment, Dinçer, İ., Midilli, A. and Küçük, A., Editor, Springer, pp.585-593, 2014

Three-Dimensional Numerical Analysis of Thermal Output of a Steel Panel Radiator

in: Progress in Exergy Energy and the Environment, Dincer,Ibrahim,Midilli,Adnan,Kucuk,Haydar, Editor, Springer-Verlag , Basel, pp.585-593, 2014

Investigation of Humidity Effects on the Thermal Comfort and Heat Balance of the Body

in: Progress in Exergy, Energy and the Environement, İbrahim Dinçer, Adnan Midilli, Haydar Küçük, Editor, Springer International Publishing, pp.421-434, 2014

Mathematical modeling of a small scale compressed air energy storage system

in: Progress in Exergy Energy and the EnvironmentPart II, , Editor, Springer International Publishing Switzerland, pp.477-486, 2014

Mathematical Modeling of a Small Scale Compressed Air Energy Storage System.

in: Progress in Exergy, Energy, and the Environment, Dinçer,İ.,Midilli,A. and Küçük,A., Editor, Springer, London/Berlin , Basel, pp.477-434, 2014

Mathematical modeling of a small scale compressed air energy storage system

in: Progress in Exergy Energy and the EnvironmentPart II, İbrahim Dİnçer, Adnan Midilli, Haydar Küçük, Editor, Springer International Publishing, pp.477-486, 2014

Performance Estimation of Gas Turbine System via Degree-Day Method

in: Progress in Exergy, Energy, and the Environment, Dinçer,İ.,Midilli,A. and Küçük,A., Editor, Springer, London/Berlin , Basel, pp.585-593, 2014

Three Dimensional Numerical Analysis of Thermal Output of a Steel Panel Radiator

in: Progress in Exergy, Energy and the Environement, İbrahim Dinçer, Adnan Midilli, Haydar Küçük, Editor, Springer International Publishing, pp.585-593, 2014

Investigation of Humidity Effects on the Thermal Comfort and Heat Balance of the Body

in: Progress in Exergy, Energy, and the Environment, Dinçer, İ., Midilli, A. and Küçük, A., Editor, Springer, pp.421-434, 2014