Prof. Dr. FATİH KARPAT

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.28, sa.1, 2023 (Hakemli Dergi)

35. Fatigue performances of helicopter gears

Kalay O. C., Yuce C., Doğan O., Yılmaz T. G., Karpat E., Kopmaz O., et al.

MATERIALS TESTING , cilt.65, sa.1, ss.52-62, 2023 (SCI-Expanded)

36. EXPERIMENTAL AND NUMERICAL ANALYSIS OF MECHANICAL PROPERTIES OF CARBON FIBER-REINFORCED POLYMER GEARS

DEDE F., KALAY O., YILMAZ T. G., KARPAT F.

ACTA TECHNICA CORVINIENSIS – Bulletin of Engineering , 2023 (Hakemli Dergi)

37. Cross-Sectional Shape Comparison In Corrugated Plates

Savran E., Cakarer C., Sener F. B., KARPAT F.

Journal of Advanced Materials Science and Engineering , cilt.2, sa.1, ss.1-8, 2022 (Hakemli Dergi)

38. A Numerical Analysis of Hybrid Spur Gears with Asymmetric Teeth: Stress and Dynamic Behavior

MACHINES , cilt.10, sa.11, 2022 (SCI-Expanded)

39. Energy and Carbon Loss Management in an Electric Bus Factory for Energy Sustainability

Savran E., Yavaş Ö., Erolnalbur B., Karpat F.

The Transdisciplinary Journal of Engineering & Science , cilt.13, sa.2, ss.97-110, 2022 (Scopus) Sürdürülebilir Kalkınma

40. Review on finite element analysis of dental implants

Büyük F. N., Savran E., Karpat F.

Journal of Dental Implant Research , cilt.41, sa.3, ss.50-63, 2022 (Hakemli Dergi)

41. Prognostics and Health Management of Wind Energy Infrastructure Systems

Yuce C., Gecgel O., Dogan O., Dabetwar S., Yanik Y., Kalay O. C., et al.

ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg , cilt.8, 2022 (ESCI) Sürdürülebilir Kalkınma

42. Batarya Elektrikli Araçlarda Şanzıman Tipleri Üzerine Derleme

Karpat F., Savran E.

Uluslararası Bilim Teknoloji ve Tasarım Dergisi , cilt.3, sa.1, ss.56-81, 2022 (Hakemli Dergi) Sürdürülebilir Kalkınma

43. Effects of asymmetric tooth profile on single-tooth stiffness of polymer gears

Yuce C., Dogan O., KARPAT F.

MATERIALS TESTING , cilt.64, sa.4, ss.513-523, 2022 (SCI-Expanded)

44. Fault Classification of Wind Turbine Gearbox Bearings Based on Convolutional Neural Networks

KARPAT F., Kalay O. C., DİRİK A. E., KARPAT E.

Transdisciplinary Journal of Engineering and Science , cilt.13, ss.71-83, 2022 (Scopus) Sürdürülebilir Kalkınma

45. A numerical investigation on the hybrid spur gears: Stress and dynamic analysis

Yılmaz T. G., Doğan O., Karpat F.

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , cilt.236, sa.1, ss.354-369, 2022 (SCI-Expanded)

46. A Comparative 3D Finite Element Computational Study of Stress Distribution and Stress Transfer in Small-Diameter Conical Dental Implants

Kalay O. C., Karaman H., KARPAT F., Dogan O., YÜCE C., KARPAT E., et al.

TEHNICKI VJESNIK-TECHNICAL GAZETTE , cilt.28, sa.6, ss.2045-2054, 2021 (SCI-Expanded)

47. PMMA ve ABS MALZEMELERİN LAZER İLETİM KAYNAĞI İLE BİRLEŞTİRİLMESİNDE PROSES PARAMETRE ETKİLERİNİN İNCELENMESİ

KÜÇÜKOĞLU A., YÜCE C., KARPAT F., Okar H., Sözer İ. E., Kurt N.

Uludağ University Journal of The Faculty of Engineering , cilt.26, sa.2, ss.481-491, 2021 (Hakemli Dergi)

48. INFLUENCE OF LINEAR PROFILE MODIFICATIONS ON THE DYNAMIC LOADING OF A SPUR GEAR

Doğan O., Kalay O., Karpat F.

Uludağ University Journal of The Faculty of Engineering , cilt.26, sa.2, ss.5-10, 2021 (Hakemli Dergi)

49. Effect of the cooling process on the mechanical properties and microstructural behavior of extruded AZ31 and AM50 Mg alloys

Kurtulus E., Sapmaz I., Karpat F.

Materialpruefung/Materials Testing , cilt.63, sa.7, ss.654-661, 2021 (SCI-Expanded)

50. Effects of rim thickness and drive side pressure angle on gear tooth root stress and fatigue crack propagation life

Dogan O., Yuce C., KARPAT F.

ENGINEERING FAILURE ANALYSIS , cilt.122, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

51. A comparative experimental study on the impact strength of standard and asymmetric involute spur gears

Kalay O. C., Doğan O., YILMAZ T. G., Yüce C., KARPAT F.

MEASUREMENT , cilt.172, 2021 (SCI-Expanded)

52. Kargo Taşıma için İnsansız Hava Aracı

Demirbaş A. M., İnan B., Damyanlı E. C., Karaman O., Nurten M. C., gönül E., et al.

Mühendis ve Makine güncel , 2021 (Hakemli Dergi)

53. Optimum Design of Brake Pedal for Trucks Using Structural Optimization and Design of Experiment Techniques

DOĞAN O., KALAY O. C., KARTAL E., KARPAT F.

International Journal of Automotive Science and Technology , cilt.4, sa.4, ss.272-280, 2020 (Hakemli Dergi)

54. Influences of gear design parameters on dynamic tooth loads and time-varying mesh stiffness of involute spur gears

Doğan O., Karpat F., Kopmaz O., Ekwaro-Osire S.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.45, 2020 (SCI-Expanded)

55. Laser-Induced Microgrooves Improve the Mechanical Responses of Cemented Implant Systems

Khandaker M., Moussa A. A., Sama D. N., Safavinia F., Hazra S., Kalay O. C., et al.

MICROMACHINES , cilt.11, sa.5, 2020 (SCI-Expanded)

56. EFFECTS OF CRACK INITIALIZATION ANGLE ON CRACKPROPAGATION PATH OF THIN RIM GEARS FOR WINDTURBINES

Doğan O., Kalay O. C., Karpat F.

Uludağ University Journal of The Faculty of Engineering , cilt.20, sa.1, ss.217-230, 2020 (Hakemli Dergi)

57. The Effect of Hamatum Curvature Angle on Carpal Tunnel Volumetry: A Mathematical Simulation Model

Alp N. B., Kaleli T., Kalay O. C., KARPAT F., Akdag G., Macunluoglu A. C., et al.

COMPUTATIONAL AND MATHEMATICAL METHODS IN MEDICINE , cilt.2020, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

58. Understanding the causes behind coracoid graft osteolysis in latarjet procedure (finite element analysis and comparison of three fixation methods)

Alp N. B., DOĞAN O., YILMAZ T. G., Kalay O. C., Moussa A. A., KARPAT F., et al.

ORTHOPAEDICS & TRAUMATOLOGY-SURGERY & RESEARCH , cilt.106, sa.1, ss.53-59, 2020 (SCI-Expanded)

59. Understanding the causes behind coracoid graft osteolysis in Latarjet procedure: Finite element analysis and comparison of three fixation methods Éléments de compréhension de l'ostéolyse de la coracoïde après l'intervention de Latarjet : étude en éléments finis comparant trois méthodes de fixation

Alp N. B., DOĞAN O., YILMAZ T. G., Kalay O. C., Moussa A. A., KARPAT F., et al.

Revue de Chirurgie Orthopedique et Traumatologique , cilt.106, sa.1, ss.29, 2020 (Scopus)

60. Experimental measurement and numerical validation of single tooth stiffness for involute spur gears

KARPAT F., Yuce C., Dugan O.

MEASUREMENT , cilt.150, 2020 (SCI-Expanded)

61. Angulated versus parallel headless cannulated screw fixation for type 1 capitellum fracture: A finite element study

ALP N. B., Efendigil T., Demir Ö., BİLSEL İ. K., KALAY O. C., KARPAT F., et al.

Annals of Medical Research , cilt.27, sa.10, ss.2550, 2020 (Hakemli Dergi)

62. FINITE ELEMENT STRESS AND MODAL ANALYSIS OFBIMETAL SPUR GEARS

Uludağ University Journal of The Faculty of Engineering , cilt.24, sa.3, ss.339-346, 2019 (Hakemli Dergi)

63. The Effect of Tooth Thickness on Root Stress of Internal Spur Gear Mechanism

Karpat F., Ekwaro Osire S., Karpat E.

International Research Journal of Engineering and Technology , cilt.6, sa.11, ss.2079-2083, 2019 (Hakemli Dergi)

64. A comparative numerical study of forged bi-metal gears: Bending strength and dynamic response

YILMAZ T. G., DOĞAN O., KARPAT F.

MECHANISM AND MACHINE THEORY , cilt.141, ss.117-135, 2019 (SCI-Expanded)

65. Investigations on the microstructure and mechanical properties of laser welded dissimilar galvanized steel-aluminum joints

Yuce C., KARPAT F., YAVUZ N.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.104, sa.5-8, ss.2693-2704, 2019 (SCI-Expanded)

66. Crack detection for spur gears with asymmetric teeth based on the dynamic transmission error

DOĞAN O., KARPAT F.

MECHANISM AND MACHINE THEORY , cilt.133, ss.417-431, 2019 (SCI-Expanded)

67. TEMEL DİŞLİ TASARIM PARAMETRELERİNİN TEK DİŞ VE KAVRAMA RİJİTLİĞİNE ETKİSİNİN SONLU ELEMANLAR METODU İLE İNCELENMESİ

Doğan O., Karpat F.

Uludağ University Journal of The Faculty of Engineering , cilt.23, sa.4, 2018 (Hakemli Dergi)

68. STRESS ANALYSIS OF THIN RIMMED ASYMMETRIC SPUR GEARS

Yılmaz T. G., Kalay O., Karpat F.

INTERNATIONAL JOURNAL OF ADVANCES ON AUTOMOTIVE AND TECHNOLOGY , cilt.2, sa.3, ss.143-150, 2018 (Hakemli Dergi)

69. Effects of using cutter with asymmetric tip radius on root stress of thin and solid rimmed internal gear

Yılmaz T. G., Kalay O., Karpat F.

International Journal of Development Research , cilt.8, sa.7, ss.21463-21470, 2018 (Hakemli Dergi)

70. Design and development of tractor clutch using combined field and bench tests

KARPAT F., Yuce C., DOĞAN O., Genc M. O., KAYA N.

TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING , cilt.42, sa.2, ss.136-146, 2018 (SCI-Expanded)

71. IMPROVING BENDING LOAD CAPACITY OF SPUR GEARS WITH INCREASING ROOT RADIUS

Kalay O. C., Doğan O., Karpat F.

INTERNATIONAL SCIENTIFIC JOURNALTRANS MOTAUTO WORLD , cilt.3, sa.1, ss.7-10, 2018 (Hakemli Dergi)

72. Structural Analysis of Dental Implants with Various Micro Grove Profiles

Karaman H., Yüce C., Karpat F., Dhanasekaran L., Khandaker M.

International Research Journal of Advanced Engineering and Science , cilt.3, sa.1, ss.101-104, 2018 (Hakemli Dergi)

73. Stress analysis of involute spur gears with different parameters by finite element an graphical method

DOĞAN O., YILMAZ T. G., KARPAT F.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.33, sa.4, ss.1493-1504, 2018 (SCI-Expanded)

74. A Study of Lightweight Door Hinges of Commercial Vehicles Using Aluminum Instead of Steel for Sustainable Transportation

YILMAZ T. G., Tufekci M., KARPAT F.

SUSTAINABILITY , cilt.9, sa.10, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

75. Shape Optimization of an Overdesinged Chain Link by using Desing of Experiment and Grapical Optimization

KARPAT F., DOĞAN O., YÜCE C.

International Journal of Mechanical And Production Engineering , cilt.5, sa.10, ss.106-110, 2017 (Hakemli Dergi)

76. The Optimization of Process Parameters for Laser Welded Galvanized Automobile Steel Sheets Using A Taguchi Method

Yüce C., Karpat F., Yavuz N., Tekin G., Çapar N.

International Journal of Mechanical And Production Engineering , cilt.5, sa.9, ss.83-87, 2017 (Hakemli Dergi)

77. AN ALTERNATIVE METHOD TO SPECIFY UNDERCUT POINT OF INVOLUTE SPUR GEAR WITH LOW NUMBER TEETH

Yılmaz T. G., Yüce C., Karpat F.

International Journal of Mechanical and Production Engineering , cilt.9, sa.5, ss.96-99, 2017 (Hakemli Dergi)

78. An improved numerical method for the mesh stiffness calculation of spur gears with asymmetric teeth on dynamic load analysis

KARPAT F., DOĞAN O., Yuce C., Ekwaro-Osire S.

ADVANCES IN MECHANICAL ENGINEERING , cilt.9, sa.8, 2017 (SCI-Expanded)

79. A Review of the Mechanical Joining Techniques for Thermoplastics

Karpat F., Küçükoğlu A.

JOJ Material Science , cilt.3, sa.1, ss.1-2, 2017 (Hakemli Dergi)

80. The Effect of Process Parameters on the Microstructure and Mechanical Performance of Fiber Laser-Welded AA5182 Aluminium Alloys

Yuce C., Tutar M., KARPAT F., YAVUZ N., Tekin G.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.63, sa.9, ss.510-518, 2017 (SCI-Expanded)

81. Design Verification of Tractor Clutch Cover under High Centrifugal Effect

Karpat F., Doğan O., Yüce C., Genç M. O.

International Journal of Automotive Science and Tecnology , cilt.1, sa.1, ss.29-33, 2017 (Hakemli Dergi)

82. The Optimization of Process Parameters and Microstructural Characterization of Fiber Laser Welded Dissimilar HSLA and MART Steel Joints

Yuce C., Tutar M., KARPAT F., YAVUZ N.

METALS , cilt.6, sa.10, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

83. A novel design procedure for tractor clutch fingers by using optimization and response surface methods

DOĞAN O., KARPAT F., Yuce C., KAYA N., YAVUZ N., Sen H.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.30, sa.6, ss.2615-2625, 2016 (SCI-Expanded)

84. ELECTROMAGNETIC COMPATIBILITY EMC IN WIND TURBINES

Karpat E., Karpat F.

International Journal of Industrial Electronics and Electrical Engineering, , cilt.4, sa.6, ss.90-93, 2016 (Hakemli Dergi)

85. Design Optimization Of Aluminum Hinge Parts For Lightweight Vehicles Performance Durability And Manufacturability

Tüfekçi M., Karpat F., Yüce C., Doğan O., Yılmaz T. G., Kaya N.

International Journal of Mechanical and Production Engineering , cilt.3, sa.12, ss.11-18, 2015 (Hakemli Dergi)

86. A Review On Advanced Joining Techniques Of Multi Material Part Manufacturing For Automotive Industry

Yüce C., Karpat F., Yavuz N.

International Journal of Mechanical and Production Engineering , cilt.3, sa.5, ss.63-68, 2015 (Hakemli Dergi)

87. A Case Study: Designing for Sustainability and Reliability in an Automotive Seat Structure

Yuce C., KARPAT F., YAVUZ N., Sendeniz G.

SUSTAINABILITY , cilt.6, sa.7, ss.4608-4631, 2014 (SCI-Expanded) Sürdürülebilir Kalkınma

88. THE ANALYSIS OF SOME FACTORS FOR THE OPTIMIZATION OF CYLINDRICAL GEAR TRANSMITTERS

Ibrahımı N., Ramadani R., Sadullah A., Karpat F.

International Journal of Mechanical Engineering and Technology , cilt.5, sa.4, ss.10-15, 2014 (Hakemli Dergi)

89. A Virtual Tool for Minimum Cost Design of a Wind Turbine Tower with Ring Stiffeners

KARPAT F.

ENERGIES , cilt.6, sa.8, ss.3822-3840, 2013 (SCI-Expanded) Sürdürülebilir Kalkınma

90. A Computer Program for Dynamic Load Simulation of Spur Gears with Asymmetric and Symmetric Teeth

World Journal of Mechanics , cilt.2, sa.5, ss.239-245, 2012 (Hakemli Dergi)

91. Dynamic analysis of involute spur gears with asymmetric teeth

KARPAT F., Ekwaro-Osire S., ÇAVDAR K., Babalik F. C.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.50, sa.12, ss.1598-1610, 2008 (SCI-Expanded) Sürdürülebilir Kalkınma

92. Probabilistic analysis of MEMS asymmetric gear tooth

KARPAT F., Ekwaro-Osire S., Khandaker M. P. H.

JOURNAL OF MECHANICAL DESIGN , cilt.130, sa.4, 2008 (SCI-Expanded)

93. Experimental studies on galling onset in OCTG connections: A review

Ekwaro-Osire S., KARPAT F.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME , cilt.130, sa.1, 2008 (SCI-Expanded)

94. Influence of Tip Relief Modification on the Wear of Spur Gears with Asymmetric Teeth

KARPAT F., Ekwaro-Osire S.

TRIBOLOGY TRANSACTIONS , cilt.51, sa.5, ss.581-588, 2008 (SCI-Expanded)

95. An alternative mechanism of non-contact anterior cruciate ligament injury during jump-landing: In-vitro simulation

Hashemi J., Chandrashekar N., Jang T., KARPAT F., Oseto M., Ekwaro-Osire S.

EXPERIMENTAL MECHANICS , cilt.47, sa.3, ss.347-354, 2007 (SCI-Expanded)

96. Computer aided analysis of bending strength of involute spur gears with asymmetric profile

Cavdar K., Karpat F., Babalik F.

Journal of Mechanical Design, Transactions of the ASME , cilt.127, sa.3, ss.477-484, 2005 (SCI-Expanded)

97. Computer aided analysis of involute spur gears with asymmetric teeth

Çavdar K., Babalık F., Karpat F.

VDI Berichte , cilt.1904, ss.145-163, 2005 (Hakemli Dergi)

98. Asimetrik Evolvent Profilli Düz Dişli Çarkların Geometri ve Gerilme Analizi

TMMOB Mühendis Makine Dergisi , cilt.45, sa.528, ss.40-49, 2004 (Hakemli Dergi)

99. Asimetrik Evolvent Profilli Düz Dişlilerin Boyutlandırılması ve Geometrik Modellerinin Oluşturulması

ÇAVDAR K., KARPAT F., Fatih C B.

Uludağ Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.9, sa.1, ss.111-121, 2004 (Hakemli Dergi)

100. Bilgisayar Yardımıyla Düz Helisel Konik ve Sonsuz Vida Dişli Mekanizmalarının Boyutlandırılması ve Analizi

TURAN A. K., ERZAN TOPÇU E., KARPAT F.

TMMOB Mühendis Makine , sa.510, ss.26-32, 2002 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 107

1. Finite Element Analysis of Traumatic Blast Shock on a Brain Phantom Model

Khandaker M., Kalay O. C., Kıvanç Turan M., Savran E., KARPAT F., Hossan M.

SEM Annual Conference and Exposition on Experimental and Applied Mechanics, SEM 2024, Washington, Amerika Birleşik Devletleri, 3 - 06 Haziran 2024, ss.145-153, (Tam Metin Bildiri)

2. COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF PRESSURE DISTRIBUTION AND FLOW DYNAMICS IN A ROTARY JOINT UNIT

YÜCE B. E., Oğuz O., Akbıyık F., Mermer T., YÜCE C., KARPAT F.

ICAME 2024, İstanbul, Türkiye, 24 - 26 Aralık 2024, (Tam Metin Bildiri)

3. Sürücü Koltuklarında Negatif Rijitlik Yapısının Kütleye Bağlı Performans İncelemesi

3rd International Conference on Recent Academic Studies ICRAS, Konya, Türkiye, 3 - 04 Aralık 2024, ss.984-990, (Tam Metin Bildiri)

4. Gearbox Fault Diagnosis With Deep Learning Under Variable Operating Conditions

Kalay O. C., KARPAT E., DİRİK A. E., KARPAT F., Ekwaro-Osire S.

ASME International Mechanical Engineering Congress and Exposition, Portland, Amerika Birleşik Devletleri, 17 - 21 Kasım 2024, (Tam Metin Bildiri)

5. Frezeleme İşleminde Eksenel Kullanım Yoğunluğuna Bağlı Olarak Titreşimlerin Kesme Üzerindeki Etkisi

Askerden M. K., Karpat F., Çakır M. C.

12th UTIS International Congress on Machining, Antalya, Türkiye, 1 - 03 Kasım 2024, cilt.1, ss.232-240, (Tam Metin Bildiri)

6. Effect of Tool Holder Rigidity on Machining

Askerden M. K., Karpat F., Çakır M. C.

12th UTIS International Congress on Machining, Antalya, Türkiye, 1 - 03 Kasım 2024, cilt.1, ss.683-686, (Tam Metin Bildiri)

7. Effect of Asymmetric Cutting Tools on Surface Quality

Askerden M. K., Karpat F., Çakır M. C.

12th UTIS International Congress on Machining, Antalya, Türkiye, 1 - 03 Kasım 2024, cilt.1, ss.679-682, (Tam Metin Bildiri)

8. Investigation of the Effect of Hole Diameter and Aspect Ratio on Elastic Buckling Strength and Determination Buckling Coefficients for Thin Plate Structural Parts in Aerospace Industry with Finite Elements Method

Subran M., KARPAT F.

3rd International Conference on Scientific and Academic Research, Konya, Türkiye, 25 Aralık 2023, (Tam Metin Bildiri)

9. A Deep Learning-Based Method For Early Crack Diagnosis In Non-Standard Spur Gear Pairs

Kalay O. C., KARPAT F., KARPAT E., DİRİK A. E., Ekwaro Osire S.

ASME 2023 International Mechanical Engineering Congress and Exposition, IMECE 2023, New Orleans, Amerika Birleşik Devletleri, 29 Ekim - 02 Kasım 2023, (Tam Metin Bildiri)

10. Otomobil Ön Tampon Braketinde Tasarım İyileştirmesi

Savran E., Vargelci S., CATENARO L., KARPAT F.

1st International Conference on Engineering, Natural and Social Sciences (ICENSOS 2022, Konya, Türkiye, 20 - 21 Aralık 2022, (Tam Metin Bildiri)

11. EXPERIMENTAL MODEL DEVELOPMENT USING AN ANIMAL BRAIN PHANTOM TO STUDY CAVITATION DAMAGE FROM TRAUMATIC BRAIN INJURY

Khandaker M., Giri A., Nayak P., Jarshaw C., Kalay O. C., KARPAT F., et al.

ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022), Ohio, Amerika Birleşik Devletleri, 29 Ekim - 03 Kasım 2022, (Tam Metin Bildiri)

12. Otomatik Park Sistemi için Sonlu Eleman Analizi Çalışması

KARPAT F., Savran E., Kartal E., Sener F. B., Cakarer C.

1st International Conference on Innovative Academic Studies, Konya, Türkiye, 10 - 12 Eylül 2022, (Tam Metin Bildiri)

13. Hibrit Dişlilerde Süren Taraf Kavrama açısının Tek Diş Rijitliğine Etkilerinin İncelenmesi

2nd International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 15 Ekim 2022, (Tam Metin Bildiri)

14. INFLUENCE OF TOOTH PROFILE MODIFICATIONS ON GEAR TRANSMİSSİON ERROR

Kartal E., Savran E., Karba B., KARPAT F.

INTERNATIONAL CAPITAL CONFERENCE ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH, lizbon, Portekiz, 13 - 14 Temmuz 2022, (Tam Metin Bildiri)

15. Süren taraf kavrama açısının hibrit dişlilerin oluşan gerilmelere etkileri

International Conference on Global Practice of Multidiciplinary Scientific Studies, TİFLİS, Gürcistan, 24 Haziran 2022, (Tam Metin Bildiri)

16. Fault Diagnosis of Rolling Bearing Under Variable Operating Conditions Based on Deep Learning

Karpat F., Kalay O. C., Dirik A. E., Karpat E.

10th International Scientific Conference on Research and Development of Mechanical Elements and Systems, Belgrade, Sırbistan, 26 Mayıs 2022, ss.148-155, (Tam Metin Bildiri)

17. EXPERIMENTAL AND NUMERICAL ANALYSIS OF MECHANICAL PROPERTIES OF CARBON FIBER-REINFORCED POLYMER GEARS

KARPAT F., DEDE F., YILMAZ T. G., KALAY O.

10th International Scientific Conference IRMES 2022, Belgrade, Sırbistan, 26 Mayıs 2022, (Tam Metin Bildiri)

18. Fault Diagnosis With Deep Learning for Standard and Asymmetric Involute Spur Gears

KARPAT F., DİRİK A. E., KALAY O. C., YÜCE C., DOĞAN O., KORCUKLU B.

ASME 2021 International Mechanical Engineering Congress and Exposition, Amerika Birleşik Devletleri, 01 Kasım 2021, cilt.1314029, (Tam Metin Bildiri)

19. EXPERIMENTAL MODEL DEVELOPMENT USING AN ANIMAL BRAIN PHANTOM TO STUDY NEURAL DAMAGE FROM TRAUMATIC BRAIN INJURY

Khandaker M., Giri A., Nayak P., Jarshaw C., Kalay O. C., KARPAT F., et al.

ASME 2022 International Mechanical Engineering Congress and Exposition, IMECE 2022, Ohio, Amerika Birleşik Devletleri, 30 Ekim - 03 Kasım 2022, cilt.4, (Tam Metin Bildiri)

20. The Self-Compensation Approach for Backlash on Gear Train

Karba B., Yıldırım N., Vardar M., KARPAT F., Rackov M.

11th International Conference on Machine and Industrial Design in Mechanical Engineering, KOD 2021, Novi-Sad, Sırbistan, 10 - 12 Haziran 2021, cilt.109, ss.85-96, (Tam Metin Bildiri)

21. A REVIEW ON STEEL-COMPOSITE HYBRID GEARS

Dede F., KARPAT F.

International Antalya Scientific Research and Innovative Studies Congress, Antalya, Türkiye, 18 - 21 Aralık 2021, (Tam Metin Bildiri)

22. Convolutional neural networks based rolling bearing fault classification under variable operating conditions

KARPAT F., Kalay O. C., DİRİK A. E., Dogan O., KORCUKLU B., Yuce C.

2021 International Conference on INnovations in Intelligent SysTems and Applications, INISTA 2021, Kocaeli, Türkiye, 25 - 27 Ağustos 2021, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

23. Rolling Bearing Fault Diagnosis Under Variable Working Conditions with Artificial Intelligence

Karpat F., Dirik A. E., Kalay O. C.

International Conference on Interdisciplinary Applications of AI (ICIDAAI), Yalova, Türkiye, 21 - 23 Mayıs 2021, ss.1-5, (Tam Metin Bildiri)

24. STRESS ANALYSIS OF ADDITIVE MANUFACTURED LIGHTWEIGHT SPUR GEARS

YILMAZ T. G., Kalay O. C., KARPAT F., Ekwaro-Osire S.

ASME 2021 International Mechanical Engineering Congress and Exposition, IMECE 2021, Virtual, Online, 1 - 05 Kasım 2021, cilt.2A-2021, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

25. LASER MICROGROOVING AND NANOFIBER MEMBRANE APPLICATION FOR TOTAL KNEE REPLACEMENT IMPLANTS USING A CAPRINE MODEL

Khandaker M., Nikfarjam S., Kari K., Kalay O. C., KARPAT F., Progri H., et al.

ASME 2021 International Mechanical Engineering Congress and Exposition, IMECE 2021, Virtual, Online, 1 - 05 Kasım 2021, cilt.5, (Tam Metin Bildiri)

26. Hibrit Dişli Çarkların Farklı Ortam Sıcaklıklarında Analizi

Karpat F.

Sanayi Odaklı Lisans Bitirme Projeleri Programı, 13 Ağustos 2020, ss.177-180, (Tam Metin Bildiri)

27. A Novel AI-Based Method for Spur Gear Early Fault Diagnosis in Railway Gearboxes

KARPAT F., DİRİK A. E., Doğan O., Kalay O. C., KORCUKLU B., YÜCE C.

2020 Innovations in Intelligent Systems and Applications Conference (ASYU), Istanbul, Turkey, Türkiye, 15 - 17 Ekim 2020, ss.1-6, (Tam Metin Bildiri)

28. AN INVESTIGATION ON THE DESIGN OF FORMATE AND GENERATE FACE MILLED HYPOID GEARS

Yılmaz T. G., Kalay O., Karpat F., Doğanlı M., Altıntaş E.

ASME IMECE 2020, Oregon, Amerika Birleşik Devletleri, 15 - 19 Kasım 2020, (Tam Metin Bildiri)

29. Interferometric Detection of Sars-Cov-2 Virus with Thinned Optical Fiber

Alemdar A., Coşkun B., Bayram Ü., Muzafferoğlu N., Karpat F., Temel Ş. G.

ASGH 2020 American Society of Human Genetics, Maryland, Amerika Birleşik Devletleri, 27 Ekim 2020 - 30 Ocak 2021, ss.1, (Özet Bildiri) Sürdürülebilir Kalkınma

30. Plakalı eşanjör üretim verilerinin makine öğrenmesi yöntemleriyle incelenmesi

Karpat F., Işığıçok A.

2nd International Eurasian Conference on Science, Engineering and Technology, Gaziantep, Türkiye, 7 - 09 Ekim 2020, ss.1-5, (Tam Metin Bildiri)

31. DEVELOPMENT AND IN VITRO EVALUATION OF A SURFACE LASER MICROGROOVING PROCESS FOR ENHANCING PERFORMANCE OF CEMENTED ORTHOPEDIC IMPLANTS

Karpat F.

The 2020 ACVS Surgery Summit, Alabama, Amerika Birleşik Devletleri, 5 - 07 Ağustos 2020, ss.18, (Özet Bildiri)

32. Bending Stress Analysis of Spur Gears with Different Tooth Root Radius

Kartal E., Doğan O., Yılmaz T. G., Turan K., Kalay O., Karpat F.

4. Uluslararası Bilim, Mühendislik ve Teknolojide Yeni Trendler Kongresi, Sankt-Peterburg, Rusya, 7 - 09 Temmuz 2020, (Tam Metin Bildiri)

33. Effects of the design parameters on mesh stiffness of the spur gears

Kalay O., Doğan O., Yılmaz T. G., Turan K., Kartal E., Karpat F.

2nd INTERNATIONAL EUROPEAN CONFERENCE ONINTERDISCIPLINARY SCIENTIFIC RESEARCHES, Ankara, Türkiye, 4 - 05 Temmuz 2020, (Tam Metin Bildiri)

34. A STUDY ON THE MODAL ANALYSIS OF SPUR GEARS

Turan K., Doğan O., Yılmaz T. G., Kalay O., Kartal E., Karpat F.

2nd INTERNATIONAL EUROPEAN CONFERENCE ONINTERDISCIPLINARY SCIENTIFIC RESEARCHES, Ankara, Türkiye, 4 - 05 Temmuz 2020, (Tam Metin Bildiri)

35. Vibration-based early crack diagnosis with machine learning for spur gears

KARPAT F., DİRİK A. E., Kalay O. C., Doan O., KORCUKLU B.

ASME 2020 International Mechanical Engineering Congress and Exposition, IMECE 2020, Virtual, Online, 16 - 19 Kasım 2020, cilt.7B-2020, (Tam Metin Bildiri)

36. The effect of micro grooving on goat total knee replacement: A finite element study

Khandaker M., Kalay O. C., KARPAT F., Haleem A., Williams W., Boyce K. E., et al.

ASME 2020 International Mechanical Engineering Congress and Exposition, IMECE 2020, Virtual, Online, 16 - 19 Kasım 2020, cilt.5, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

37. STRESS ANALYSIS OF INTERNAL SPUR GEARS WITH ASYMMETRIC TEETH

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 17 - 19 Aralık 2019, (Tam Metin Bildiri)

38. AN ALTERNATIVE METHOD TO ELIMINATE UNDERCUT OF SPUR GEARS

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 17 - 19 Aralık 2019, (Tam Metin Bildiri)

39. INTERFERENCE ANALYSIS OF SPUR GEARS WITH ASYMMETRIC TROCHOID

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 17 - 19 Aralık 2019, (Tam Metin Bildiri)

40. Numerical Analysis With Physical Test Correlation and Design Optimization of a Rollover Protective Structure (ROPS)

Karpat F., Yahşi M., Alp M. K.

IMECE 2019 ASME 2019 International Mechanical Engineering Congress and Exposition, Utah, Amerika Birleşik Devletleri, 11 - 14 Kasım 2019, (Tam Metin Bildiri)

41. FINITE ELEMENT ANALYSIS OF HUMAN SCAPULA COMPARISON OF SCREW, WEDGE PLATE, AND ENDOBUTTON FIXATION METHODS

KARPAT F., ALP N. B., KALAY O., DOĞAN O., YILMAZ T. G., Khandaker M., et al.

ASME IMECE 2019, SALT LAKE CITY, Amerika Birleşik Devletleri, 8 - 14 Kasım 2019, (Tam Metin Bildiri)

42. Effects of Drive Side Pressure Angle on Gear Fatigue Crack Propagation Life for Spur Gears With Symmetric and Asymmetric Teeth

Karpat F., Doğan O., Yılmaz T. G., Yüce C., Kalay O., Karpat E., et al.

ASME IMECE 2019 Volume 9: Mechanics of Solids, Structures, and Fluids, Utah, Amerika Birleşik Devletleri, 11 - 14 Kasım 2019, (Tam Metin Bildiri)

43. Stress and Mesh Stiffness Evaluation of Bimaterial Spur Gears

Karpat F., Yılmaz T. G., Doğan O., Kalay O.

ASME IMECE 2019 Volume 2B: Advanced Manufacturing, Utah, Amerika Birleşik Devletleri, 11 - 14 Kasım 2019, (Tam Metin Bildiri)

44. A Review for Investigation Studies That are Done for Improving Image ProcessingClassification Based on Convolutional Neural Network (CNN) That is Architectural of Deep Learning

Tüfekçi M., Karpat F.

HORA2019 - International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Nevşehir, Türkiye, 05 Temmuz 2019, (Tam Metin Bildiri)

45. Bending Stress Comparison of Asymmetric and Asymmetric Trochoid Spur Gear

Yılmaz T. G., Karpat F., Kalay O.

Alternative Energy Sources, Materials Technologies (AESMT’19), Sofija, Bulgaristan, 3 - 04 Haziran 2019, ss.129-130, (Tam Metin Bildiri)

46. Crack Propagation Path Analysisof Spur Gears for Wind Turbines

Doğan O., Kalay O. C., Karpat F.

Alternative Energy Sources, Materials amp Technologies (AESMT’19), Sofija, Bulgaristan, 3 - 04 Haziran 2019, (Tam Metin Bildiri)

47. Effects of Heat Input in Laser Welding of Dissimilar Galvanized Steel to Aluminium Alloy

Yüce C., Karpat F., Yavuz N.

Proceedings of the 4th World Congress on Mechanical, Chemical, and Material Engineering (MCM’xx18), Madrid, İspanya, 16 - 18 Ağustos 2018, (Tam Metin Bildiri)

48. Influence of Root Geometry on Bending Stress for Involute Spur Gears

7th International Conference on Mechanics and Industrial Engineering (ICMIE’xx18), Madrid, İspanya, 16 - 18 Ağustos 2018, (Tam Metin Bildiri)

49. Development of Special Improvement and Maintenance Model for Conveyor Lines

Yüce C., Doğan O., Semih Sezer B., Karpat F., Yavuz N.

9th International Automotive Technologies Congress - OTEKON 2018, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.1601-1608, (Tam Metin Bildiri)

50. EXPERIMENTAL INVESTIGATION OF THE IMPACT RESISTANCE OF INVOLUTE SPUR GEARS

Doğan O., Karpat F., Yüce C., Kalay O. C.

2018 The 9th International Conference on Mechanical and Aerospace Engineering (ICMAE’18), Budapest, Macaristan, 10 - 13 Temmuz 2018, (Tam Metin Bildiri)

51. Stress Analysis of Internal Gear Pairs with Unequal Tooth Thickness

2018 9th International Conference on Mechanical and Aerospace Engineering (ICMAE), Budapest, Macaristan, 10 - 13 Temmuz 2018, ss.478-482, (Tam Metin Bildiri)

52. EFFECTS OF LINEAR SHORT TIP RELIEF MODIFICATION ON DYNAMIC RESPONSE OF THE SPUR GEARS

Doğan O., Kalay O. C., Karpat F.

2018 Alternative Energy Sources, Materials Technologies (AESMT’18), Plovdiv, Bulgaristan, 14 - 15 Mayıs 2018, (Tam Metin Bildiri)

53. STRESS ANALYSIS OF THIN RIMMED ASYMMETRIC SPUR GEARS

Yılmaz T. G., Kalay O., Karpat F.

INTERNATIONAL CONFERENCE ON PROGRESSES IN AUTOMOTIVE TECHNOLOGIES, İstanbul, Türkiye, 10 - 12 Mayıs 2018, ss.74-81, (Tam Metin Bildiri)

54. A CASE STUDY: AN ALTERNATIVE APPROACH TO WEIGHT REDUCTION OF SPUR GEAR PAIR WITH USING NON-STANDARD TOOTH THICKNESS

KARPAT F., Ekwaro Osire S., KARPAT E.

9th International Automotive Technologies Congress-OTEKON 2018, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.731-736, (Tam Metin Bildiri)

55. IMPROVING BENDING LOAD CAPACITY OF SPUR GEARS WITH INCREASING ROOT RADIUS

Kalay O. C., Doğan O., Karpat F.

XI INTERNATIONAL CONFERENCEFOR YOUNG RESEARCHERS, Sofija, Bulgaristan, 14 - 17 Mart 2018, cilt.1, ss.3-6, (Tam Metin Bildiri)

56. Experimental and Numerical Analysis of Electrospun FiberAnchored Silicone Intervertebral Disc

Tummala S., Doğan O., Karpat F., Khandaker M.

ORS 2018 ANNUAL MEETING, California, Amerika Birleşik Devletleri, 10 - 13 Mart 2018, cilt.1, ss.81, (Tam Metin Bildiri)

57. INFLUENCE OF HEAT INPUT ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF LASER WELDED DISSIMILAR GALVANIZED STEEL-ALUMINUM JOINTS

Yuce C., KARPAT F., YAVUZ N.

13th ASME International Manufacturing Science and Engineering Conference, Texas, Amerika Birleşik Devletleri, 18 - 22 Haziran 2018, (Tam Metin Bildiri)

58. IMPROVEMENT OF LOADING CAPACITY OF INTERNAL SPUR GEAR WITH USING ASYMMETRIC TROCHOID PROFILE

YILMAZ T. G., DOĞAN O., Yuce C., KARPAT F.

ASME International Mechanical Engineering Congress and Exposition, Tama, Japonya, 3 - 09 Kasım 2017, (Tam Metin Bildiri)

59. EVALUATION OF BIOMECHANICAL PERFORMANCES OF ELECTROSPUN FIBER ANCHORED SILICONE DISC AS AN INTERVERTEBRAL DISC IMPLANT

Tummala S., DOĞAN O., KARPAT F., Riahinezhad S., Khandaker M.

ASME International Mechanical Engineering Congress and Exposition, Tama, Japonya, 3 - 09 Kasım 2017, (Tam Metin Bildiri)

60. EFFECT OF MICRO-GROOVING ON THE STRESS SHIELDING OF TITANIUM: EXPERIMENTAL AND NUMERICAL INVESTIGATIONS

Jamadagni H. G., Karaman H., KARPAT F., Williams W., Dhanasekaran L., Khandaker M.

ASME International Mechanical Engineering Congress and Exposition, Tama, Japonya, 3 - 09 Kasım 2017, (Tam Metin Bildiri)

61. Shape Optimization of an Overdesigned Chain Link by Using Design of Experiment and Grapical Optimization

Karpat F., Doğan O., Yüce C.

Academics World 66th International Conference, Praha, Çek Cumhuriyeti, 21 - 22 Mayıs 2017, (Tam Metin Bildiri)

62. An Alternative Method to Specify Undercut Point of Involute Spur Gear with Low Number Teeth

Yılmaz T. G., Yüce C., Karpat F.

ISERD, 218th International Conference on Recent Innovations in Engineering and Technology (ICRIET), Florence, İtalya, 21 - 22 Temmuz 2017, (Tam Metin Bildiri)

63. Prototype Conveyor Line Monitoring System

Yüce C., Yılmaz T. G., Karpat F., Yavuz N.

ISERD, 218th International Conference on Recent Innovations in Engineering and Technology (ICRIET), Florence, İtalya, 21 - 22 Temmuz 2017, (Tam Metin Bildiri)

64. The Optimization of Process Parameters for Laser Welded Galvanized Automobile Steel Sheets Using A Taguchi Method

Yüce C., Karpat F., Yavuz N., Tekin G., Çapar N.

International Conference on Engineering,Technology and Innovations (IACETI), Paris, Fransa, 13 - 14 Temmuz 2017, ss.52-56, (Tam Metin Bildiri)

65. Stress Analysis of Thin Rimmed Spur Gear with Asymmetric Trochoid

Yılmaz T. G., Doğan O., Karpat F.

6TH INTERNATIONAL CONFERENCE ON MECHANICS AND INDUSTRIAL ENGINEERING (ICMIE’xx17), Rome, İtalya, 8 - 10 Haziran 2017, (Tam Metin Bildiri)

66. SHAPE OPTIMIZATION OF AN OVERDESINGED CHAIN LINK BY USING DESING OF EXPERIMENT AND GRAPICAL OPTIMIZATION

Karpat F., Doğan O., Yüce C.

Proceedings of Academics World 66th International Conference, Praha, Çek Cumhuriyeti, 21 - 22 Mayıs 2017, (Tam Metin Bildiri)

67. THE JOINING TECHNIQUES FOR THERMOPLASTICS MATERIALS IN AUTOMOTIVE INDUSTRIES: A COMPREHENSIVE LITERATURE REVIEW

Kucukoglu A., KARPAT F.

ASME International Mechanical Engineering Congress and Exposition (IMECE2016), Arizona, Amerika Birleşik Devletleri, 11 - 17 Kasım 2016, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

68. Effect of fiber laser welding parameters on the penetration depth and weld bead geometry

Yüce C., Karpat F., Yavuz N., Tekin G., Çapan N.

1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Türkiye, 26 - 28 Ekim 2016, (Tam Metin Bildiri)

69. Entegre Bir Dişli Çark Tasarım Metodolojisinin Geliştirilmesi

Yılmaz T. G., Güllü E., Karpat F.

8.OTOMOTİV TEKNOLOJİLERİ KONGRESİ, Bursa, Türkiye, 23 - 24 Mayıs 2016, (Tam Metin Bildiri)

70. ELECTROMAGNETIC COMPATIBILITY (EMC) IN WIND TURBINES

KARPAT E., KARPAT F.

International Conference on Recent Innovations in Engineering and Technology (ICRIET), Barselona, İspanya, 12 - 13 Nisan 2016, (Tam Metin Bildiri)

71. OPTIMUM DESIGN OF TRACTOR CLUTCH PTO FINGER BY USING TOPOLOGY AND SHAPE OPTIMIZATION

Dogan O., KARPAT F., KAYA N., Yuce C., Genc M. O., Yavuz N.

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015, (Tam Metin Bildiri)

72. DESIGN AND ANALYSIS OF INTERNAL GEARS WITH DIFFERENT RIM THICKNESS AND SHAPES

KARPAT F., Ekwaro-Osire S., YILMAZ T. G., Dogan O., Yuce C.

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015, (Tam Metin Bildiri)

73. SHAPE OPTIMIZATION OF CLUTCH CUSHION DISC USING DIFFERENTIAL EVOLUTION METHOD

KAYA N., Kartal S., Cakmak T., KARPAT F., Karaduman A.

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015, (Tam Metin Bildiri)

74. Otomobil Kapı Menteşesinin Bilgisayar Destekli Tasarımı Analizi ve Doğrulanması

TÜFEKÇİ M., YILMAZ T. G., YÜCE C., DOĞAN O., KARPAT F.

XIII. Otomotiv ve Yan Sanayi Sempozyumu ve Sergisi, İstanbul, Türkiye, 13 - 14 Kasım 2015, ss.33-41, (Tam Metin Bildiri)

75. Optimum Design of Tractor Clutch PTO Finger Using Topology and Shape Optimization

Doğan O., Karpat F., Kaya N., Yüce C., Yavuz N., Genç M. O.

ASME IMECE 2015, Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015, (Tam Metin Bildiri)

76. Design Optimization of Aluminum Hinge Parts for Lightweight Vehicles Performance Durability and Manufacturability

TÜFEKÇİ M., KARPAT F., YÜCE C., DOĞAN O., YILMAZ T. G., KAYA N.

2015 IIER 19th International Conference on Recent Innovations in Engineering and Technology (ICRRIET2015), 23 Ekim 2015, (Tam Metin Bildiri)

77. A Review on advanced joining techniques of multi material part manufacturing for automotive industry

YÜCE C., KARPAT F., YAVUZ N., DOĞAN O.

Proceedings of Eighteenth TheIIER International Conference, ROMA, İtalya, 28 - 29 Mart 2015, ss.51-56, (Tam Metin Bildiri)

78. Effect of Rim Thickness on Tooth Root Stress and Mesh Stiffness of Internal Gears

Karpat F., Engin B., Doğan O., Yüce C., Yılmaz T. G.

ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Kanada, 14 - 20 Kasım 2014, cilt.11, (Tam Metin Bildiri)

79. EXPERIMENTAL VERIFICATION AND FINITE ELEMENT ANALYSIS OF AUTOMOTIVE DOOR HINGE

Dogan S., Guven C., KARPAT F., YILMAZ T. G., Dogan O.

ASME International Mechanical Engineering Congress and Exposition (IMECE2014), Montreal, Kanada, 14 - 20 Kasım 2014, (Tam Metin Bildiri)

80. A NOVEL METHOD FOR CALCULATION GEAR TOOTH STIFFNESS FOR DYNAMIC ANALYSIS OF SPUR GEARS WITH ASYMMETRIC TEETH

KARPAT F., Dogan O., Ekwaro-Osire S., Yuce C.

ASME International Mechanical Engineering Congress and Exposition (IMECE), Montreal, Kanada, 14 - 20 Kasım 2014, (Tam Metin Bildiri)

81. THE INVESTIGATION OF STRESS DISTRIBUTION ON THE TRACTOR CLUTCH FINGER MECHANISM BY USING FINITE ELEMENT METHOD

KARPAT F., Dogan O., Yuce C., KAYA N., Cengiz G.

ASME International Mechanical Engineering Congress and Exposition (IMECE2014), Montreal, Kanada, 14 - 20 Kasım 2014, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

82. EFFECTS OF RIM THICKNESS ON TOOTH ROOT STRESS AND MESH STIFFNESS OF INTERNAL GEARS

KARPAT F., Engin B., Dogan O., Yuce C., YILMAZ T. G.

ASME International Mechanical Engineering Congress and Exposition (IMECE), Montreal, Kanada, 14 - 20 Kasım 2014, (Tam Metin Bildiri)

83. Traktör Debriyajı Parmak Mekanizmasının Analizi

Karpat F., Doğan O., Yüce C., Kaya N., Yavuz N., Cengiz G.

7. Otomotiv Teknolojileri Kongresi OTEKON 2014, Bursa, Türkiye, 26 - 27 Mayıs 2014, (Tam Metin Bildiri)

84. Traktör Debriyak Parmak Mekanizmasının Analizi

KARPAT F., DOĞAN O., YÜCE C., KAYA N., YAVUZ N., CENGİZ G.

OTEKON’14 7. Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 26 - 27 Mayıs 2014, ss.1-7, (Tam Metin Bildiri)

85. Yolcu Koltukları İçin Kompozit Oturak Bağlantı Parçasının Geliştirilmesi

YÜCE C., KARPAT F., YAVUZ N., ERBİL S., DOLAYLAR E.

OTEKON’14 7. Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 26 - 27 Mayıs 2014, ss.1-7, (Tam Metin Bildiri)

86. A Virtual Tool for Wear Simulation of Plastic Gear Pairs

KARPAT F., EKWARO OSIRE S., YÜCE C., KARPAT E.

ASME International Mechanical Engineering Congress Exposition, San Diego, California, USA, Amerika Birleşik Devletleri, 15 Kasım 2013 - 21 Kasım 2015, cilt.9, (Tam Metin Bildiri)

87. A VIRTUAL TOOL FOR WEAR SIMULATION OF PLASTIC GEAR PAIRS

Karpat F., Ekwaro-Osire S., Yuce C., Karpat F.

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013, (Tam Metin Bildiri)

88. PROTOTYPING A NEW LIGHTWEIGHT PASSENGER SEAT

Yuce C., KARPAT F., Yavuz N., Kaynakli Ö., Dolaylar E., Sendeniz G.

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013, (Tam Metin Bildiri)

89. Yolcu Koltuğunda Hafifletme Üzerine Bir Çalışma

Yüce C., Yavuz N., Karpat F., Sendeniz G., Aksoy M.

Makine İmalat Teknolojileri Sempozyumu ve Sergisi (MATİT 2013), Bursa, Türkiye, 6 - 07 Aralık 2013, ss.151-157, (Tam Metin Bildiri)

90. A VIRTUAL TOOL FOR WEAR SIMULATION OF STANDARD AND NON-STANDARD SPUR GEARS

INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING, Houston, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, ss.261-264, (Tam Metin Bildiri)

91. Uncertainty Consideration in Multibody Dynamic Analysis of Helical-Gear-Pairs

Alemayehu F. M., Ekwaro Osire S., Karpat F.

International Conference on Gears 2013, Munich, Almanya, 10 - 13 Ekim 2013, cilt.1, ss.427-438, (Tam Metin Bildiri)

92. A VIRTUAL TOOL FOR WEAR SIMULATION OF STANDARD AND NON-STANDARD SPUR GEARS

KARPAT F., Ekwaro-Osire S., KARPAT F.

ASME International Mechanical Engineering Congress and Exposition, Texas, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, ss.261-264, (Tam Metin Bildiri)

93. EFFICIENCY OF THE HIGH CONTACT RATIO INVOLUTE SPUR GEARS WITH ASYMMETRIC TEETH

KARPAT F., Ekwaro-Osire S.

ASME International Mechanical Engineering Congress and Exposition (IMECE), Vancouver, Kanada, 12 - 18 Kasım 2010, ss.319-320, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

94. Rüzgar Türbini Test Düzeneği Tasarımı

KARPAT F., ÇAVDAR K.

TİMAK Tasarım İmalat Analiz Kongresi konferansı, Türkiye, 11 - 12 Kasım 2010, ss.323-330, (Tam Metin Bildiri)

95. Influence Of Some Gear Design Parameters On Asymmetrıc Gear Tooth Strength

KARPAT F., Ekwaro Osire S.

The 3th International Conference Power Transmissions’09, Kallithea, Yunanistan, 1 - 02 Ekim 2009, ss.119-124, (Tam Metin Bildiri)

96. A Weibull failure theory for contact loading in gears with asymmetric teeth

Dhorje M., Ekwaro-Osire S., Khandaker M., KARPAT F.

2008 ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, Boston, MA, Amerika Birleşik Devletleri, 31 Ekim - 06 Kasım 2008, cilt.16, ss.181-186, (Tam Metin Bildiri)

97. DYNAMIC ANALYSIS OF HIGH-CONTACT-RATIO SPUR GEARS WITH ASYMMETRIC TEETH

IMECE 2008: MECHANICAL SYSTEMS AND CONTROL, VOL 11, Boston, Amerika Birleşik Devletleri, 31 Ekim - 06 Kasım 2008, ss.285-291, (Tam Metin Bildiri)

98. An Inverse Problem Technique for Spur Gears with Asymmetric Teeth

Ekwaro Osire S., Karpat F., Durukan İ., Alemayehu F. M., Cardenas Garcia J.

Proceedings of the 2009 SEM Annual Conference Exposition, New Mexico, Amerika Birleşik Devletleri, 1 - 03 Haziran 2009, ss.399-400, (Özet Bildiri)

99. Wear of Involute Spur Gears With Asymmetric Teeth Under Dynamic Loading

Karpat F., Ekwaro Osire S.

ASME 2006 International Mechanical Engineering Congress and Exposition, Illinois, Amerika Birleşik Devletleri, 10 - 15 Kasım 2006, ss.37-45, (Tam Metin Bildiri)

100. Influence Of Tip Relief Modification On The Wear Of Spur Gears With Asymmetric Teeth

Karpat F., Ekwaro Osire S.

Society of Tribologists and Lubrication Engineers (STLE)’xxs 2007 Annual Meeting Exhibition, Pennsylvania, Amerika Birleşik Devletleri, 6 - 10 Mayıs 2007, ss.1-8, (Tam Metin Bildiri)

101. Asimetrik Evolvent Dişe Sahip Düz Dişli Çarkların Bilgisayar Destekli Parametrik Analizi

Karpat F., Çavdar K.

TİMAK Tasarım İmalat Analiz Kongresi konferansı, Balıkesir, Türkiye, 26 - 27 Nisan 2006, ss.65-76, (Tam Metin Bildiri)

102. An Investigation on Dynamic Analysis of Involute Spur Gears With Asymmetric Teeth: Dynamic Load And Transmission Errors

Ekwaro-Osire S., Karpat F.

The 2nd International Conference Power Transmissions’06, Novi-Sad, Sırbistan, 25 - 26 Nisan 2006, ss.69-73, (Tam Metin Bildiri)

103. Experimental studies on galling onset in OCTG connections - A review

2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, Chicago, IL, Amerika Birleşik Devletleri, 5 - 10 Kasım 2006, (Tam Metin Bildiri)

104. Probabilistic analysis of MEMS asymmetric gear tooth

KARPAT F., Ekwaro-Osire S., Khandaker M.

2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, Chicago, IL, Amerika Birleşik Devletleri, 5 - 10 Kasım 2006, (Tam Metin Bildiri)

105. Asansör Kabin Taşıyıcıların Sonlu Elemanlar Yöntemi Yardımıyla Analizi