Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Influence of tooth root cracks on the mesh stiffness of asymmetric spur gear pair with different backup ratios

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022 (Peer-Reviewed Journal) Sustainable Development identifier identifier

Effects of asymmetric tooth profile on single-tooth stiffness of polymer gears

MATERIALS TESTING, vol.64, no.4, pp.513-523, 2022 (Peer-Reviewed Journal) identifier identifier

A numerical investigation on the hybrid spur gears: Stress and dynamic analysis

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020 (Peer-Reviewed Journal) identifier identifier

Investigations on the microstructure and mechanical properties of laser welded dissimilar galvanized steel-aluminum joints

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.104, no.5-8, pp.2693-2704, 2019 (Peer-Reviewed Journal) identifier identifier

Crack detection for spur gears with asymmetric teeth based on the dynamic transmission error

MECHANISM AND MACHINE THEORY, vol.133, pp.417-431, 2019 (Peer-Reviewed Journal) identifier identifier

Design and development of tractor clutch using combined field and bench tests

TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, vol.42, no.2, pp.136-146, 2018 (Peer-Reviewed Journal) identifier

Stress analysis of involute spur gears with different parameters by finite element an graphical method

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.33, no.4, pp.1493-1504, 2018 (Peer-Reviewed Journal) identifier identifier

A novel design procedure for tractor clutch fingers by using optimization and response surface methods

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.30, no.6, pp.2615-2625, 2016 (Peer-Reviewed Journal) identifier identifier

Dynamic analysis of involute spur gears with asymmetric teeth

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, vol.50, no.12, pp.1598-1610, 2008 (Peer-Reviewed Journal) Sustainable Development identifier identifier

Probabilistic analysis of MEMS asymmetric gear tooth

JOURNAL OF MECHANICAL DESIGN, vol.130, no.4, 2008 (Peer-Reviewed Journal) identifier identifier

Experimental studies on galling onset in OCTG connections: A review

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, vol.130, no.1, 2008 (Peer-Reviewed Journal) identifier identifier

Influence of Tip Relief Modification on the Wear of Spur Gears with Asymmetric Teeth

TRIBOLOGY TRANSACTIONS, vol.51, no.5, pp.581-588, 2008 (Peer-Reviewed Journal) identifier identifier identifier

Computer aided analysis of bending strength of involute spur gears with asymmetric profile

Journal of Mechanical Design, Transactions of the ASME, vol.127, no.3, pp.477-484, 2005 (Peer-Reviewed Journal) identifier identifier

Articles Published in Other Journals

Review on finite element analysis of dental implants

Journal of Dental Implant Research, vol.41, no.3, pp.50-63, 2022 (Peer-Reviewed Journal)

Prognostics and Health Management of Wind Energy Infrastructure Systems

ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg, vol.8, 2022 (Peer-Reviewed Journal) identifier

A Review on Gearbox Types in Battery Electric Vehicle

Uluslararası Bilim Teknoloji ve Tasarım Dergisi, vol.3, no.1, pp.56-81, 2022 (Peer-Reviewed Journal) Sustainable Development

Fault Classification of Wind Turbine Gearbox Bearings Based on Convolutional Neural Networks

Transdisciplinary Journal of Engineering and Science, vol.13, pp.71-83, 2022 (Peer-Reviewed Journal) Sustainable Development identifier

Optimum Design of Brake Pedal for Trucks Using Structural Optimization and Design of Experiment Techniques

International Journal of Automotive Science and Technology, vol.4, no.4, pp.272-280, 2020 (Peer-Reviewed Journal)

EFFECTS OF CRACK INITIALIZATION ANGLE ON CRACKPROPAGATION PATH OF THIN RIM GEARS FOR WINDTURBINES

Uludağ University Journal of The Faculty of Engineering, vol.20, no.1, pp.217-230, 2020 (Peer-Reviewed Journal)

FINITE ELEMENT STRESS AND MODAL ANALYSIS OFBIMETAL SPUR GEARS

Uludağ University Journal of The Faculty of Engineering, vol.24, no.3, pp.339-346, 2019 (Peer-Reviewed Journal)

The Effect of Tooth Thickness on Root Stress of Internal Spur Gear Mechanism

International Research Journal of Engineering and Technology, vol.6, no.11, pp.2079-2083, 2019 (Peer-Reviewed Journal)

Effects of using cutter with asymmetric tip radius on root stress of thin and solid rimmed internal gear

International Journal of Development Research, vol.8, no.7, pp.21463-21470, 2018 (Peer-Reviewed Journal)

STRESS ANALYSIS OF THIN RIMMED ASYMMETRIC SPUR GEARS

INTERNATIONAL JOURNAL OF ADVANCES ON AUTOMOTIVE AND TECHNOLOGY, vol.2, no.3, pp.143-150, 2018 (Peer-Reviewed Journal)

IMPROVING BENDING LOAD CAPACITY OF SPUR GEARS WITH INCREASING ROOT RADIUS

INTERNATIONAL SCIENTIFIC JOURNALTRANS MOTAUTO WORLD, vol.3, no.1, pp.7-10, 2018 (Peer-Reviewed Journal)

Structural Analysis of Dental Implants with Various Micro Grove Profiles

International Research Journal of Advanced Engineering and Science, vol.3, no.1, pp.101-104, 2018 (Peer-Reviewed Journal)

Shape Optimization of an Overdesinged Chain Link by using Desing of Experiment and Grapical Optimization

International Journal of Mechanical And Production Engineering, vol.5, no.10, pp.106-110, 2017 (Peer-Reviewed Journal)

AN ALTERNATIVE METHOD TO SPECIFY UNDERCUT POINT OF INVOLUTE SPUR GEAR WITH LOW NUMBER TEETH

International Journal of Mechanical and Production Engineering, vol.9, no.5, pp.96-99, 2017 (Peer-Reviewed Journal)

The Optimization of Process Parameters for Laser Welded Galvanized Automobile Steel Sheets Using A Taguchi Method

International Journal of Mechanical And Production Engineering, vol.5, no.9, pp.83-87, 2017 (Peer-Reviewed Journal)

A Review of the Mechanical Joining Techniques for Thermoplastics

JOJ Material Science, vol.3, no.1, pp.1-2, 2017 (Peer-Reviewed Journal)

Design Verification of Tractor Clutch Cover under High Centrifugal Effect

International Journal of Automotive Science and Tecnology, vol.1, no.1, pp.29-33, 2017 (Peer-Reviewed Journal)

ELECTROMAGNETIC COMPATIBILITY EMC IN WIND TURBINES

International Journal of Industrial Electronics and Electrical Engineering,, vol.4, no.6, pp.90-93, 2016 (Peer-Reviewed Journal)

Design Optimization Of Aluminum Hinge Parts For Lightweight Vehicles Performance Durability And Manufacturability

International Journal of Mechanical and Production Engineering, vol.3, no.12, pp.11-18, 2015 (Peer-Reviewed Journal)

A Review On Advanced Joining Techniques Of Multi Material Part Manufacturing For Automotive Industry

International Journal of Mechanical and Production Engineering, vol.3, no.5, pp.63-68, 2015 (Peer-Reviewed Journal)

THE ANALYSIS OF SOME FACTORS FOR THE OPTIMIZATION OF CYLINDRICAL GEAR TRANSMITTERS

International Journal of Mechanical Engineering and Technology, vol.5, no.4, pp.10-15, 2014 (Peer-Reviewed Journal)

Asimetrik Evolvent Profilli Düz Dişli Çarkların Geometri ve Gerilme Analizi

TMMOB Mühendis Makine Dergisi, vol.45, no.528, pp.40-49, 2004 (Peer-Reviewed Journal)

Asimetrik Evolvent Profilli Düz Dişlilerin Boyutlandırılması ve Geometrik Modellerinin Oluşturulması

Uludağ Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, vol.9, no.1, pp.111-121, 2004 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Fault Diagnosis of Rolling Bearing Under Variable Operating Conditions Based on Deep Learning

10th International Scientific Conference on Research and Development of Mechanical Elements and Systems, Belgrade, Serbia, 26 May 2022, pp.148-155

Fault Diagnosis With Deep Learning for Standard and Asymmetric Involute Spur Gears

ASME 2021 International Mechanical Engineering Congress and Exposition, United States Of America, 01 November 2021, vol.1314029 identifier

The Self-Compensation Approach for Backlash on Gear Train

11th International Conference on Machine and Industrial Design in Mechanical Engineering, KOD 2021, Novi-Sad, Serbia, 10 - 12 June 2021, vol.109, pp.85-96 identifier

Convolutional neural networks based rolling bearing fault classification under variable operating conditions

2021 International Conference on INnovations in Intelligent SysTems and Applications, INISTA 2021, Kocaeli, Turkey, 25 - 27 August 2021 Sustainable Development identifier

Rolling Bearing Fault Diagnosis Under Variable Working Conditions with Artificial Intelligence

International Conference on Interdisciplinary Applications of AI (ICIDAAI), Yalova, Turkey, 21 - 23 May 2021, pp.1-5

LASER MICROGROOVING AND NANOFIBER MEMBRANE APPLICATION FOR TOTAL KNEE REPLACEMENT IMPLANTS USING A CAPRINE MODEL

ASME 2021 International Mechanical Engineering Congress and Exposition, IMECE 2021, Virtual, Online, 1 - 05 November 2021, vol.5 identifier

STRESS ANALYSIS OF ADDITIVE MANUFACTURED LIGHTWEIGHT SPUR GEARS

ASME 2021 International Mechanical Engineering Congress and Exposition, IMECE 2021, Virtual, Online, 1 - 05 November 2021, vol.2A-2021 Sustainable Development identifier

Hibrit Dişli Çarkların Farklı Ortam Sıcaklıklarında Analizi

Sanayi Odaklı Lisans Bitirme Projeleri Programı, 13 August 2020, pp.177-180

A Novel AI-Based Method for Spur Gear Early Fault Diagnosis in Railway Gearboxes

2020 Innovations in Intelligent Systems and Applications Conference (ASYU), Istanbul, Turkey, Turkey, 15 - 17 October 2020 identifier

Interferometric Detection of Sars-Cov-2 Virus with Thinned Optical Fiber

ASGH 2020 American Society of Human Genetics, Maryland, United States Of America, 27 October 2020 - 30 January 2021, pp.1 Sustainable Development

Plakalı eşanjör üretim verilerinin makine öğrenmesi yöntemleriyle incelenmesi

2nd International Eurasian Conference on Science, Engineering and Technology, Gaziantep, Turkey, 7 - 09 October 2020, pp.1-5

Bending Stress Analysis of Spur Gears with Different Tooth Root Radius

4. Uluslararası Bilim, Mühendislik ve Teknolojide Yeni Trendler Kongresi, Sankt-Peterburg, Russia, 7 - 09 July 2020

Effects of the design parameters on mesh stiffness of the spur gears

2nd INTERNATIONAL EUROPEAN CONFERENCE ONINTERDISCIPLINARY SCIENTIFIC RESEARCHES, Ankara, Turkey, 4 - 05 July 2020

A STUDY ON THE MODAL ANALYSIS OF SPUR GEARS

2nd INTERNATIONAL EUROPEAN CONFERENCE ONINTERDISCIPLINARY SCIENTIFIC RESEARCHES, Ankara, Turkey, 4 - 05 July 2020

The effect of micro grooving on goat total knee replacement: A finite element study

ASME 2020 International Mechanical Engineering Congress and Exposition, IMECE 2020, Virtual, Online, 16 - 19 November 2020, vol.5 Sustainable Development identifier

Vibration-based early crack diagnosis with machine learning for spur gears

ASME 2020 International Mechanical Engineering Congress and Exposition, IMECE 2020, Virtual, Online, 16 - 19 November 2020, vol.7B-2020 identifier

AN ALTERNATIVE METHOD TO ELIMINATE UNDERCUT OF SPUR GEARS

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Turkey, 17 - 19 December 2019

INTERFERENCE ANALYSIS OF SPUR GEARS WITH ASYMMETRIC TROCHOID

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Turkey, 17 - 19 December 2019

STRESS ANALYSIS OF INTERNAL SPUR GEARS WITH ASYMMETRIC TEETH

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Turkey, 17 - 19 December 2019

Effects of Drive Side Pressure Angle on Gear Fatigue Crack Propagation Life for Spur Gears With Symmetric and Asymmetric Teeth

ASME IMECE 2019 Volume 9: Mechanics of Solids, Structures, and Fluids, Utah, United States Of America, 11 - 14 November 2019 identifier

Stress and Mesh Stiffness Evaluation of Bimaterial Spur Gears

ASME IMECE 2019 Volume 2B: Advanced Manufacturing, Utah, United States Of America, 11 - 14 November 2019 identifier

Numerical Analysis With Physical Test Correlation and Design Optimization of a Rollover Protective Structure (ROPS)

IMECE 2019 ASME 2019 International Mechanical Engineering Congress and Exposition, Utah, United States Of America, 11 - 14 November 2019 identifier

A Review for Investigation Studies That are Done for Improving Image ProcessingClassification Based on Convolutional Neural Network (CNN) That is Architectural of Deep Learning

HORA2019 - International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Nevşehir, Turkey, 05 July 2019

Bending Stress Comparison of Asymmetric and Asymmetric Trochoid Spur Gear

Alternative Energy Sources, Materials Technologies (AESMT’19), Sofija, Bulgaria, 3 - 04 June 2019, pp.129-130

Crack Propagation Path Analysisof Spur Gears for Wind Turbines

Alternative Energy Sources, Materials amp Technologies (AESMT’19), Sofija, Bulgaria, 3 - 04 June 2019

Effects of Heat Input in Laser Welding of Dissimilar Galvanized Steel to Aluminium Alloy

Proceedings of the 4th World Congress on Mechanical, Chemical, and Material Engineering (MCM’xx18), Madrid, Spain, 16 - 18 August 2018

Influence of Root Geometry on Bending Stress for Involute Spur Gears

7th International Conference on Mechanics and Industrial Engineering (ICMIE’xx18), Madrid, Spain, 16 - 18 August 2018

Development of Special Improvement and Maintenance Model for Conveyor Lines

9th International Automotive Technologies Congress - OTEKON 2018, Bursa, Turkey, 7 - 08 May 2018, pp.1601-1608

EXPERIMENTAL INVESTIGATION OF THE IMPACT RESISTANCE OF INVOLUTE SPUR GEARS

2018 The 9th International Conference on Mechanical and Aerospace Engineering (ICMAE’18), Budapest, Hungary, 10 - 13 July 2018 identifier

Stress Analysis of Internal Gear Pairs with Unequal Tooth Thickness

2018 9th International Conference on Mechanical and Aerospace Engineering (ICMAE), Budapest, Hungary, 10 - 13 July 2018, pp.478-482

EFFECTS OF LINEAR SHORT TIP RELIEF MODIFICATION ON DYNAMIC RESPONSE OF THE SPUR GEARS

2018 Alternative Energy Sources, Materials Technologies (AESMT’18), Plovdiv, Bulgaria, 14 - 15 May 2018

STRESS ANALYSIS OF THIN RIMMED ASYMMETRIC SPUR GEARS

INTERNATIONAL CONFERENCE ON PROGRESSES IN AUTOMOTIVE TECHNOLOGIES, İstanbul, Turkey, 10 - 12 May 2018, pp.74-81

A CASE STUDY: AN ALTERNATIVE APPROACH TO WEIGHT REDUCTION OF SPUR GEAR PAIR WITH USING NON-STANDARD TOOTH THICKNESS

9th International Automotive Technologies Congress-OTEKON 2018, Bursa, Turkey, 7 - 08 May 2018, pp.731-736

IMPROVING BENDING LOAD CAPACITY OF SPUR GEARS WITH INCREASING ROOT RADIUS

XI INTERNATIONAL CONFERENCEFOR YOUNG RESEARCHERS, Sofija, Bulgaria, 14 - 17 March 2018, vol.1, pp.3-6

Experimental and Numerical Analysis of Electrospun FiberAnchored Silicone Intervertebral Disc

ORS 2018 ANNUAL MEETING, California, United States Of America, 10 - 13 March 2018, vol.1, pp.81

IMPROVEMENT OF LOADING CAPACITY OF INTERNAL SPUR GEAR WITH USING ASYMMETRIC TROCHOID PROFILE

ASME International Mechanical Engineering Congress and Exposition, Tama, Japan, 3 - 09 November 2017 identifier

INFLUENCE OF HEAT INPUT ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF LASER WELDED DISSIMILAR GALVANIZED STEEL-ALUMINUM JOINTS

13th ASME International Manufacturing Science and Engineering Conference, Texas, United States Of America, 18 - 22 June 2018 identifier identifier

Prototype Conveyor Line Monitoring System

ISERD, 218th International Conference on Recent Innovations in Engineering and Technology (ICRIET), Florence, Italy, 21 - 22 July 2017

An Alternative Method to Specify Undercut Point of Involute Spur Gear with Low Number Teeth

ISERD, 218th International Conference on Recent Innovations in Engineering and Technology (ICRIET), Florence, Italy, 21 - 22 July 2017

The Optimization of Process Parameters for Laser Welded Galvanized Automobile Steel Sheets Using A Taguchi Method

International Conference on Engineering,Technology and Innovations (IACETI), Paris, France, 13 - 14 July 2017, pp.52-56

Stress Analysis of Thin Rimmed Spur Gear with Asymmetric Trochoid

6TH INTERNATIONAL CONFERENCE ON MECHANICS AND INDUSTRIAL ENGINEERING (ICMIE’xx17), Rome, Italy, 8 - 10 June 2017

SHAPE OPTIMIZATION OF AN OVERDESINGED CHAIN LINK BY USING DESING OF EXPERIMENT AND GRAPICAL OPTIMIZATION

Proceedings of Academics World 66th International Conference, Praha, Czech Republic, 21 - 22 May 2017

THE JOINING TECHNIQUES FOR THERMOPLASTICS MATERIALS IN AUTOMOTIVE INDUSTRIES: A COMPREHENSIVE LITERATURE REVIEW

ASME International Mechanical Engineering Congress and Exposition (IMECE2016), Arizona, United States Of America, 11 - 17 November 2016 Sustainable Development identifier identifier

Effect of fiber laser welding parameters on the penetration depth and weld bead geometry

1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Turkey, 26 - 28 October 2016

Entegre Bir Dişli Çark Tasarım Metodolojisinin Geliştirilmesi

8.OTOMOTİV TEKNOLOJİLERİ KONGRESİ, Bursa, Turkey, 23 - 24 May 2016

SHAPE OPTIMIZATION OF CLUTCH CUSHION DISC USING DIFFERENTIAL EVOLUTION METHOD

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, United States Of America, 13 - 19 November 2015 identifier

DESIGN AND ANALYSIS OF INTERNAL GEARS WITH DIFFERENT RIM THICKNESS AND SHAPES

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, United States Of America, 13 - 19 November 2015 identifier identifier

OPTIMUM DESIGN OF TRACTOR CLUTCH PTO FINGER BY USING TOPOLOGY AND SHAPE OPTIMIZATION

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, United States Of America, 13 - 19 November 2015 identifier

Otomobil Kapı Menteşesinin Bilgisayar Destekli Tasarımı Analizi ve Doğrulanması

XIII. Otomotiv ve Yan Sanayi Sempozyumu ve Sergisi, İstanbul, Turkey, 13 - 14 November 2015, pp.33-41

Design Optimization of Aluminum Hinge Parts for Lightweight Vehicles Performance Durability and Manufacturability

2015 IIER 19th International Conference on Recent Innovations in Engineering and Technology (ICRRIET2015), 23 October 2015

A Review on advanced joining techniques of multi material part manufacturing for automotive industry

Proceedings of Eighteenth TheIIER International Conference, ROMA, Italy, 28 - 29 March 2015, pp.51-56

Effect of Rim Thickness on Tooth Root Stress and Mesh Stiffness of Internal Gears

ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Canada, 14 - 20 November 2014, vol.11

EFFECTS OF RIM THICKNESS ON TOOTH ROOT STRESS AND MESH STIFFNESS OF INTERNAL GEARS

ASME International Mechanical Engineering Congress and Exposition (IMECE), Montreal, Canada, 14 - 20 November 2014 identifier identifier

A NOVEL METHOD FOR CALCULATION GEAR TOOTH STIFFNESS FOR DYNAMIC ANALYSIS OF SPUR GEARS WITH ASYMMETRIC TEETH

ASME International Mechanical Engineering Congress and Exposition (IMECE), Montreal, Canada, 14 - 20 November 2014 identifier

EXPERIMENTAL VERIFICATION AND FINITE ELEMENT ANALYSIS OF AUTOMOTIVE DOOR HINGE

ASME International Mechanical Engineering Congress and Exposition (IMECE2014), Montreal, Canada, 14 - 20 November 2014 identifier

THE INVESTIGATION OF STRESS DISTRIBUTION ON THE TRACTOR CLUTCH FINGER MECHANISM BY USING FINITE ELEMENT METHOD

ASME International Mechanical Engineering Congress and Exposition (IMECE2014), Montreal, Canada, 14 - 20 November 2014 Sustainable Development identifier

Traktör Debriyajı Parmak Mekanizmasının Analizi

7. Otomotiv Teknolojileri Kongresi OTEKON 2014, Bursa, Turkey, 26 - 27 May 2014

PROTOTYPING A NEW LIGHTWEIGHT PASSENGER SEAT

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, United States Of America, 15 - 21 November 2013 identifier identifier

A VIRTUAL TOOL FOR WEAR SIMULATION OF PLASTIC GEAR PAIRS

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, United States Of America, 15 - 21 November 2013 identifier identifier

Yolcu Koltuğunda Hafifletme Üzerine Bir Çalışma

Makine İmalat Teknolojileri Sempozyumu ve Sergisi (MATİT 2013), Bursa, Turkey, 6 - 07 December 2013, pp.151-157

Uncertainty Consideration in Multibody Dynamic Analysis of Helical-Gear-Pairs

International Conference on Gears 2013, Munich, Germany, 10 - 13 October 2013, vol.1, pp.427-438

A VIRTUAL TOOL FOR WEAR SIMULATION OF STANDARD AND NON-STANDARD SPUR GEARS

ASME International Mechanical Engineering Congress and Exposition, Texas, United States Of America, 9 - 15 November 2012, pp.261-264 identifier identifier

EFFICIENCY OF THE HIGH CONTACT RATIO INVOLUTE SPUR GEARS WITH ASYMMETRIC TEETH

ASME International Mechanical Engineering Congress and Exposition (IMECE), Vancouver, Canada, 12 - 18 November 2010, pp.319-320 Sustainable Development identifier identifier

Rüzgar Türbini Test Düzeneği Tasarımı

TİMAK Tasarım İmalat Analiz Kongresi konferansı, Turkey, 11 - 12 November 2010, pp.323-330

Influence Of Some Gear Design Parameters On Asymmetrıc Gear Tooth Strength

The 3th International Conference Power Transmissions’09, Kallithea, Greece, 1 - 02 October 2009, pp.119-124

A Weibull failure theory for contact loading in gears with asymmetric teeth

2008 ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, Boston, MA, United States Of America, 31 October - 06 November 2008, vol.16, pp.181-186 identifier

DYNAMIC ANALYSIS OF HIGH-CONTACT-RATIO SPUR GEARS WITH ASYMMETRIC TEETH

IMECE 2008: MECHANICAL SYSTEMS AND CONTROL, VOL 11, Boston, United States Of America, 31 October - 06 November 2008, pp.285-291

An Inverse Problem Technique for Spur Gears with Asymmetric Teeth

Proceedings of the 2009 SEM Annual Conference Exposition, New Mexico, United States Of America, 1 - 03 June 2009, pp.399-400 identifier

Wear of Involute Spur Gears With Asymmetric Teeth Under Dynamic Loading

ASME 2006 International Mechanical Engineering Congress and Exposition, Illinois, United States Of America, 10 - 15 November 2006, pp.37-45

Influence Of Tip Relief Modification On The Wear Of Spur Gears With Asymmetric Teeth

Society of Tribologists and Lubrication Engineers (STLE)’xxs 2007 Annual Meeting Exhibition, Pennsylvania, United States Of America, 6 - 10 May 2007, pp.1-8

Asimetrik Evolvent Dişe Sahip Düz Dişli Çarkların Bilgisayar Destekli Parametrik Analizi

TİMAK Tasarım İmalat Analiz Kongresi konferansı, Balıkesir, Turkey, 26 - 27 April 2006, pp.65-76

An Investigation on Dynamic Analysis of Involute Spur Gears With Asymmetric Teeth: Dynamic Load And Transmission Errors

The 2nd International Conference Power Transmissions’06, Novi-Sad, Serbia, 25 - 26 April 2006, pp.69-73

Probabilistic analysis of MEMS asymmetric gear tooth

2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, Chicago, IL, United States Of America, 5 - 10 November 2006 identifier

Experimental studies on galling onset in OCTG connections - A review

2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, Chicago, IL, United States Of America, 5 - 10 November 2006 identifier

Asansör Kabin Taşıyıcıların Sonlu Elemanlar Yöntemi Yardımıyla Analizi

TMMOB Makine Müh. Odası II. İletim Teknolojileri Kongre ve Sergisi, İstanbul, Turkey, 27 - 28 May 2005, pp.105-117

Computer aided analysis of involute spur gears with asymmetric teeth

International Conference on Gears, Garching, Germany, 14 - 16 September 2005, vol.1904, pp.145-163 identifier identifier

Dişli Çark Mekanizmalarının Bilgisayar Yardımıyla Boyutlandırılması

Makine İmalat Teknolojileri Sempozyumu ve Sergisi, Konya, Turkey, 14 - 15 October 1999, pp.60-67

Books & Book Chapters

The Self-Compensation Approach for Backlash on Gear Train

in: Machine and Industrial Design in Mechanical Engineering, Maja Čavić,Radivoje Mitrović,Milan Rackov, Editor, Springer, London/Berlin , London, pp.85-96, 2022

A Comparison: Root Stress Analysis of Involute Spur Gear with Asymmetric Involute and Asymmetric Trochoid

in: INSAC Natural and Engineering Sciences, Mısır, Gizem Doç.Dr. Uzun, Mehmet, Dr., Editor, DUVAR YAYINEVİ, İzmir, pp.269-281, 2021

A Virtual Tool for Computer Aided Analysis of Spur Gears with Asymmetric Teeth

in: Applications of MATLAB in Science and Engineering, Tadeusz Michalowski, Editor, IntechOpen, London, pp.1123-1140, 2011