Prof. Dr. İRFAN KARAGÖZ

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Design of a biomimetic wing from maple samara and investigation of the aerodynamic performance

Çalışkan M. E., Kaya F., Sabırlı M. U., Karagöz İ.

Physics of Fluids , cilt.35, sa.9, 2023 (SCI-Expanded)

An experimental study of the aerodynamic performance of a maple wing model at low Reynolds numbers

Aydın N., Caliskan M. E., Sabirli M. U., Karagöz İ.

MECHANICS RESEARCH COMMUNICATIONS , cilt.130, 2023 (SCI-Expanded)

Investigation of the effects of intermediate reservoirs and intermediate feedings applications on the performance of proton exchange membrane fuel cells

Celik E., Karagöz İ.

Fuel , cilt.339, 2023 (SCI-Expanded)

Investigation of water motion in a fuel cell channel with a reservoir

Altintas A. G., Celik E., Karagöz İ.

Journal of Cleaner Production , cilt.342, 2022 (SCI-Expanded)

Performance assessment of a four-pass serpentine proton exchange membrane fuel cell with non-humidified cathode and cell state estimation without special measurement

Celik E., Karagöz İ.

International Journal of Hydrogen Energy , cilt.47, ss.9382-9394, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

Response of a proton exchange membrane fuel cell to step changes in mass flow rates

Kupeli S., Celik E., Karagöz İ.

FUEL CELLS , cilt.21, sa.4, ss.338-346, 2021 (SCI-Expanded)

NUMERICAL INVESTIGATION OF HEAT AND FLOW CHARACTERISTICS IN A LAMINAR FLOW PAST TWO TANDEM CYLINDERS

Aydın N., Ozalp A., Karagöz İ.

THERMAL SCIENCE , cilt.25, sa.4, ss.2807-2818, 2021 (SCI-Expanded)

Polymer electrolyte membrane fuel cell flow field designs and approaches for performance enhancement

Celik E., Karagöz İ.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY , cilt.234, sa.8, ss.1189-1214, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Investigation into the effects of various parameters on the performance and classification potential of a cyclone classifier

Caliskan M. E., Karagöz İ., Avcı A., Sürmen A.

POWDER TECHNOLOGY , cilt.356, ss.102-111, 2019 (SCI-Expanded)

A new explicit friction factor formula for laminar, transition and turbulent flows in smooth and rough pipes

Avci A., Karagoz İ.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS , cilt.78, ss.182-187, 2019 (SCI-Expanded)

Effects of separation space diameter on the performance of a novel reverse flow cyclone

Sakin A., KARAGÖZ İ., AVCI A.

SEPARATION SCIENCE AND TECHNOLOGY , cilt.54, sa.15, ss.2450-2460, 2019 (SCI-Expanded)

Performance analysis of axial and reverse flow cyclone separators

Sakin A., KARAGÖZ İ., AVCI A.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION , cilt.144, 2019 (SCI-Expanded)

An experimental investigation into the particle classification capability of a novel cyclone separator

Caliskan M. E., KARAGÖZ İ., AVCI A., SÜRMEN A.

SEPARATION AND PURIFICATION TECHNOLOGY , cilt.209, ss.908-913, 2019 (SCI-Expanded)

An investigation into the use of a cyclone separator in the intake air system and its influence on the engine performance

Sakin A., KARAGÖZ İ., Ergul M., Demirtas U., Savas F. H.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , cilt.232, sa.5, ss.667-678, 2018 (SCI-Expanded)

NUMERICAL PREDICTION OF SHORT-CUT FLOWS IN GAS-SOLID REVERSE FLOW CYCLONE SEPARATORS

Sakin A., KARAGÖZ İ.

CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY , cilt.23, sa.4, ss.483-493, 2017 (SCI-Expanded)

Development of a variable-profile cam to enhance the volumetric efficiency of IC engines

SÜRMEN A., ARSLAN R., KOPMAZ O., AVCI A., KARAGÖZ İ., KARAMANGİL M. İ.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.73, ss.63-75, 2017 (SCI-Expanded)

Effects of Geometrical Parameters on the Pressure Drop for a Modified Cyclone Separator

Tan F., KARAGÖZ İ., AVCI A.

CHEMICAL ENGINEERING & TECHNOLOGY , cilt.39, sa.3, ss.576-581, 2016 (SCI-Expanded)

The Effects of Vortex Finder Dimensions on the Natural Vortex Length in a New Cyclone Separator

Tan F., KARAGÖZ İ., AVCI A.

CHEMICAL ENGINEERING COMMUNICATIONS , cilt.203, sa.9, ss.1216-1221, 2016 (SCI-Expanded)

Experimental investigation into performance characteristics of reversed flow cyclone separators

Sendogan O., KARAGÖZ İ., AVCI A., SÜRMEN A.

INTERNATIONAL JOURNAL OF GLOBAL WARMING , cilt.6, ss.339-349, 2014 (SCI-Expanded)

Design and performance evaluation of a new cyclone separator

KARAGÖZ İ., AVCI A., SÜRMEN A., Sendogan O.

JOURNAL OF AEROSOL SCIENCE , cilt.59, ss.57-64, 2013 (SCI-Expanded)

Development of a new method for evaluating vortex length in reversed flow cyclone separators

AVCI A., KARAGÖZ İ., SÜRMEN A.

POWDER TECHNOLOGY , cilt.235, ss.460-466, 2013 (SCI-Expanded)

Experimental Investigation of the Natural Vortex Length in Tangential Inlet Cyclones

AVCI A., KARAGÖZ İ., SÜRMEN A., Camuz I.

SEPARATION SCIENCE AND TECHNOLOGY , cilt.48, sa.1, ss.122-126, 2013 (SCI-Expanded)

Experimental and numerical investigation of pressure drop coefficient and static pressure difference in a tangential inlet cyclone separator

Kaya F., KARAGÖZ İ.

CHEMICAL PAPERS , cilt.66, sa.11, ss.1019-1025, 2012 (SCI-Expanded)

Closure to "Discussion: 'A Novel Explicit Equation for Friction Factor in Smooth and Rough Pipes' " (2011, ASME J. Fluids Eng., 133, p. 015501)

KARAGÖZ İ., AVCI A.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.133, sa.1, 2011 (SCI-Expanded)

Effects of Surface Roughness on the Performance of Tangential Inlet Cyclone Separators

Kaya F., KARAGÖZ İ., AVCI A.

AEROSOL SCIENCE AND TECHNOLOGY , cilt.45, sa.8, ss.988-995, 2011 (SCI-Expanded)

Usability of cyclone separators as air filters in vehicles

KARAGÖZ İ., Kaya F., AVCI A.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.52, ss.133-143, 2010 (SCI-Expanded)

Numerical investigation of performance characteristics of a cyclone prolonged with a dipleg

Kaya F., KARAGÖZ İ.

CHEMICAL ENGINEERING JOURNAL , cilt.151, ss.39-45, 2009 (SCI-Expanded)

A Novel Explicit Equation for Friction Factor in Smooth and Rough Pipes

AVCI A., KARAGÖZ İ.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.131, sa.6, 2009 (SCI-Expanded)

Evaluations of Turbulence Models for Highly Swirling Flows in Cyclones

Karagoz İ., Kaya F.

CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES , cilt.43, sa.2, ss.111-129, 2009 (SCI-Expanded)

Performance analysis of numerical schemes in highly swirling turbulent flows in cyclones

Kaya F., Karagoz İ.

CURRENT SCIENCE , cilt.94, sa.10, ss.1273-1278, 2008 (SCI-Expanded)

CFD investigation of the flow and heat transfer characteristics in a tangential inlet cyclone

Karagoz İ., Kaya F.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.34, ss.1119-1126, 2007 (SCI-Expanded)

Modelling of the pressure drop in tangential inlet cyclone separators

Karagoz İ., Avci A.

AEROSOL SCIENCE AND TECHNOLOGY , cilt.39, sa.9, ss.857-865, 2005 (SCI-Expanded)

Effects of flow and geometrical parameters on the collection efficiency in cyclone separators

Avci A., Karagoz İ.

JOURNAL OF AEROSOL SCIENCE , cilt.34, sa.7, ss.937-955, 2003 (SCI-Expanded)

Variation of momentum and thermal boundary layers for oscillatory flows in a channel

Karagoz İ.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.28, sa.3, ss.379-388, 2001 (SCI-Expanded)

Theoretical investigation of pressure losses in cyclone separators

Avci A., Karagoz İ.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.28, sa.1, ss.107-117, 2001 (SCI-Expanded)

Theoretical and experimental investigation of effect of valve timing on volumetric efficiency in an IC engine

Arslan R., Karagoz İ., Surmen A.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.26, ss.298-307, 2001 (SCI-Expanded)

A mathematical model for the determination of a cyclone performance

Avci A., Karagoz İ.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.27, sa.2, ss.263-272, 2000 (SCI-Expanded)

An investigation of external flows with various pressures and surfaces

Umur H., Karagoz İ.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.26, sa.3, ss.411-419, 1999 (SCI-Expanded)

EXPERIMENTAL INVESTIGATION OF PERIODIC-FLOW IN BRANCHING PIPES

KARAGOZ İ.

FLOW MEASUREMENT AND INSTRUMENTATION , cilt.4, sa.3, ss.163-169, 1993 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Numerical simulation of flow over NACA 0015 airfoil with different turbulence models

Aydın N., Çalışkan M. E., Karagöz İ.

International Journal of Energy Applications and Technologies , cilt.7, sa.2, ss.42-49, 2020 (Hakemli Dergi)

Design and Performance Analysis of Virtual Body Mini Cyclone

Çalişkan M. E., Karagöz İ., Avcı A., Sürmen A.

International journal of Research Science and Management , cilt.12, sa.4, ss.57-65, 2017 (Hakemli Dergi)

A Computational Comparison of Flow and Pressure fields in Axial and Reverse Flow Cyclone Separators

SAKİN A., KARAGÖZ İ., AVCI A.

International Journal of Computational and Experimental Science and Engineering (IJCESEN) , cilt.3, sa.2, ss.20-25, 2017 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Organic Rankine Cycle (ORC) in Waste Heat Recovery Systems (WHRS) - A Literature Mini-Review

Turşucular E., KARAGÖZ İ.

4th International Symposium of Scientific Research and Innovative Studies, Türkiye, 13 Mart 2024, ss.303-311

SCANNING PROTOTYPING PROCESSES WITH A THREE-DIMENSIONAL PRINTER FOR MODELING A NEW AERODYNAMIC WING

AYDIN N., KARAGÖZ İ.

5TH INTERNATIONAL ICONTECH CONFERENCE ON INNOVATIVE SURVEYS IN POSITIVE SCIENCES held on February 5-6, 2022 / Sanliurfa, Turkey, Şanlıurfa, Türkiye, 05 Şubat 2022