Prof. Dr. İRFAN KARAGÖZ

Yayın Ağı

Makaleler 43

1. Enhancing the aerodynamic performance of a biomimetic wing with topography optimization

ÇALIŞKAN M. E., SABIRLI M. U., ORUÇ E., KARAGÖZ İ.

Sadhana - Academy Proceedings in Engineering Sciences , cilt.50, sa.3, 2025 (SCI-Expanded)

2. Design of a biomimetic wing from maple samara and investigation of the aerodynamic performance

Çalışkan M. E., Kaya F., Sabırlı M. U., Karagöz İ.

Physics of Fluids , cilt.35, sa.9, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

3. An experimental study of the aerodynamic performance of a maple wing model at low Reynolds numbers

Aydın N., Caliskan M. E., Sabirli M. U., Karagöz İ.

MECHANICS RESEARCH COMMUNICATIONS , cilt.130, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

4. Investigation of the effects of intermediate reservoirs and intermediate feedings applications on the performance of proton exchange membrane fuel cells

Celik E., Karagöz İ.

Fuel , cilt.339, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

5. Investigation of water motion in a fuel cell channel with a reservoir

Altintas A. G., Celik E., Karagöz İ.

Journal of Cleaner Production , cilt.342, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

6. Performance assessment of a four-pass serpentine proton exchange membrane fuel cell with non-humidified cathode and cell state estimation without special measurement

Celik E., Karagöz İ.

International Journal of Hydrogen Energy , cilt.47, ss.9382-9394, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

7. Response of a proton exchange membrane fuel cell to step changes in mass flow rates

Kupeli S., Celik E., Karagöz İ.

FUEL CELLS , cilt.21, sa.4, ss.338-346, 2021 (SCI-Expanded)

8. NUMERICAL INVESTIGATION OF HEAT AND FLOW CHARACTERISTICS IN A LAMINAR FLOW PAST TWO TANDEM CYLINDERS

Aydın N., Ozalp A., Karagöz İ.

THERMAL SCIENCE , cilt.25, sa.4, ss.2807-2818, 2021 (SCI-Expanded)

9. Polymer electrolyte membrane fuel cell flow field designs and approaches for performance enhancement

Celik E., Karagöz İ.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY , cilt.234, sa.8, ss.1189-1214, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

10. Numerical simulation of flow over NACA 0015 airfoil with different turbulence models

Aydın N., Çalışkan M. E., Karagöz İ.

International Journal of Energy Applications and Technologies , cilt.7, sa.2, ss.42-49, 2020 (Hakemli Dergi)

11. Investigation into the effects of various parameters on the performance and classification potential of a cyclone classifier

Caliskan M. E., Karagöz İ., Avcı A., Sürmen A.

POWDER TECHNOLOGY , cilt.356, ss.102-111, 2019 (SCI-Expanded)

12. A new explicit friction factor formula for laminar, transition and turbulent flows in smooth and rough pipes

Avci A., Karagoz İ.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS , cilt.78, ss.182-187, 2019 (SCI-Expanded)

13. Effects of separation space diameter on the performance of a novel reverse flow cyclone

Sakin A., KARAGÖZ İ., AVCI A.

SEPARATION SCIENCE AND TECHNOLOGY , cilt.54, sa.15, ss.2450-2460, 2019 (SCI-Expanded)

14. Performance analysis of axial and reverse flow cyclone separators

Sakin A., KARAGÖZ İ., AVCI A.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION , cilt.144, 2019 (SCI-Expanded)

15. An experimental investigation into the particle classification capability of a novel cyclone separator

Caliskan M. E., KARAGÖZ İ., AVCI A., SÜRMEN A.

SEPARATION AND PURIFICATION TECHNOLOGY , cilt.209, ss.908-913, 2019 (SCI-Expanded)

16. An investigation into the use of a cyclone separator in the intake air system and its influence on the engine performance

Sakin A., KARAGÖZ İ., Ergul M., Demirtas U., Savas F. H.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , cilt.232, sa.5, ss.667-678, 2018 (SCI-Expanded)

17. Design and Performance Analysis of Virtual Body Mini Cyclone

Çalişkan M. E., Karagöz İ., Avcı A., Sürmen A.

International journal of Research Science and Management , cilt.12, sa.4, ss.57-65, 2017 (Hakemli Dergi)

18. NUMERICAL PREDICTION OF SHORT-CUT FLOWS IN GAS-SOLID REVERSE FLOW CYCLONE SEPARATORS

Sakin A., KARAGÖZ İ.

CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY , cilt.23, sa.4, ss.483-493, 2017 (SCI-Expanded)

19. A Computational Comparison of Flow and Pressure fields in Axial and Reverse Flow Cyclone Separators

SAKİN A., KARAGÖZ İ., AVCI A.

International Journal of Computational and Experimental Science and Engineering (IJCESEN) , cilt.3, sa.2, ss.20-25, 2017 (Hakemli Dergi)

20. Development of a variable-profile cam to enhance the volumetric efficiency of IC engines

SÜRMEN A., ARSLAN R., KOPMAZ O., AVCI A., KARAGÖZ İ., KARAMANGİL M. İ.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.73, ss.63-75, 2017 (SCI-Expanded, Scopus)

21. Effects of Geometrical Parameters on the Pressure Drop for a Modified Cyclone Separator

Tan F., KARAGÖZ İ., AVCI A.

CHEMICAL ENGINEERING & TECHNOLOGY , cilt.39, sa.3, ss.576-581, 2016 (SCI-Expanded)

22. The Effects of Vortex Finder Dimensions on the Natural Vortex Length in a New Cyclone Separator

Tan F., KARAGÖZ İ., AVCI A.

CHEMICAL ENGINEERING COMMUNICATIONS , cilt.203, sa.9, ss.1216-1221, 2016 (SCI-Expanded)

23. Experimental investigation into performance characteristics of reversed flow cyclone separators

Sendogan O., KARAGÖZ İ., AVCI A., SÜRMEN A.

INTERNATIONAL JOURNAL OF GLOBAL WARMING , cilt.6, ss.339-349, 2014 (SCI-Expanded)

24. Design and performance evaluation of a new cyclone separator

KARAGÖZ İ., AVCI A., SÜRMEN A., Sendogan O.

JOURNAL OF AEROSOL SCIENCE , cilt.59, ss.57-64, 2013 (SCI-Expanded)

25. Development of a new method for evaluating vortex length in reversed flow cyclone separators

AVCI A., KARAGÖZ İ., SÜRMEN A.

POWDER TECHNOLOGY , cilt.235, ss.460-466, 2013 (SCI-Expanded)

26. Experimental Investigation of the Natural Vortex Length in Tangential Inlet Cyclones

AVCI A., KARAGÖZ İ., SÜRMEN A., Camuz I.

SEPARATION SCIENCE AND TECHNOLOGY , cilt.48, sa.1, ss.122-126, 2013 (SCI-Expanded)

27. Experimental and numerical investigation of pressure drop coefficient and static pressure difference in a tangential inlet cyclone separator

Kaya F., KARAGÖZ İ.

CHEMICAL PAPERS , cilt.66, sa.11, ss.1019-1025, 2012 (SCI-Expanded)

28. Effects of Surface Roughness on the Performance of Tangential Inlet Cyclone Separators

Kaya F., KARAGÖZ İ., AVCI A.

AEROSOL SCIENCE AND TECHNOLOGY , cilt.45, sa.8, ss.988-995, 2011 (SCI-Expanded)

29. Closure to "Discussion: 'A Novel Explicit Equation for Friction Factor in Smooth and Rough Pipes' " (2011, ASME J. Fluids Eng., 133, p. 015501)

KARAGÖZ İ., AVCI A.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.133, sa.1, 2011 (SCI-Expanded)

30. Usability of cyclone separators as air filters in vehicles

KARAGÖZ İ., Kaya F., AVCI A.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.52, ss.133-143, 2010 (SCI-Expanded)

31. Numerical investigation of performance characteristics of a cyclone prolonged with a dipleg

Kaya F., KARAGÖZ İ.

CHEMICAL ENGINEERING JOURNAL , cilt.151, ss.39-45, 2009 (SCI-Expanded)

32. A Novel Explicit Equation for Friction Factor in Smooth and Rough Pipes

AVCI A., KARAGÖZ İ.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.131, sa.6, 2009 (SCI-Expanded)

33. Evaluations of Turbulence Models for Highly Swirling Flows in Cyclones

Karagoz İ., Kaya F.

CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES , cilt.43, sa.2, ss.111-129, 2009 (SCI-Expanded)

34. Performance analysis of numerical schemes in highly swirling turbulent flows in cyclones

Kaya F., Karagoz İ.

CURRENT SCIENCE , cilt.94, sa.10, ss.1273-1278, 2008 (SCI-Expanded)

35. CFD investigation of the flow and heat transfer characteristics in a tangential inlet cyclone

Karagoz İ., Kaya F.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.34, ss.1119-1126, 2007 (SCI-Expanded)

36. Modelling of the pressure drop in tangential inlet cyclone separators

Karagoz İ., Avci A.

AEROSOL SCIENCE AND TECHNOLOGY , cilt.39, sa.9, ss.857-865, 2005 (SCI-Expanded)

37. Effects of flow and geometrical parameters on the collection efficiency in cyclone separators

Avci A., Karagoz İ.

JOURNAL OF AEROSOL SCIENCE , cilt.34, sa.7, ss.937-955, 2003 (SCI-Expanded)

38. Variation of momentum and thermal boundary layers for oscillatory flows in a channel

Karagoz İ.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.28, sa.3, ss.379-388, 2001 (SCI-Expanded)

39. Theoretical and experimental investigation of effect of valve timing on volumetric efficiency in an IC engine

Arslan R., Karagoz İ., Surmen A.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.26, ss.298-307, 2001 (SCI-Expanded)

40. Theoretical investigation of pressure losses in cyclone separators

Avci A., Karagoz İ.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.28, sa.1, ss.107-117, 2001 (SCI-Expanded)

41. A mathematical model for the determination of a cyclone performance

Avci A., Karagoz İ.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.27, sa.2, ss.263-272, 2000 (SCI-Expanded)

42. An investigation of external flows with various pressures and surfaces

Umur H., Karagoz İ.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.26, sa.3, ss.411-419, 1999 (SCI-Expanded)

43. EXPERIMENTAL INVESTIGATION OF PERIODIC-FLOW IN BRANCHING PIPES

KARAGOZ İ.

FLOW MEASUREMENT AND INSTRUMENTATION , cilt.4, sa.3, ss.163-169, 1993 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 29

1. Utilization of Organic Rankine Cycle (ORC) in Waste Heat Recovery from Ram Exhaust: A Review for the Textile Sector

Turşucular E., KARAGÖZ İ.

I. ULUSAL ENERJİ DÖNÜŞÜMÜ VE SÜRDÜRÜLEBİLİRLİK KONFERANSI (EDSK’25), Türkiye, 09 Ocak 2025, (Tam Metin Bildiri)

2. Organic Rankine Cycle (ORC) in Waste Heat Recovery Systems (WHRS) - A Literature Mini-Review

Turşucular E., Karagöz İ.

4th International Symposium of Scientific Research and Innovative Studies, Balıkesir, Türkiye, 13 Mart 2024, ss.303-311, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

3. SCANNING PROTOTYPING PROCESSES WITH A THREE-DIMENSIONAL PRINTER FOR MODELING A NEW AERODYNAMIC WING

Aydın N., Karagöz İ.

5TH INTERNATIONAL ICONTECH CONFERENCE ON INNOVATIVE SURVEYS IN POSITIVE SCIENCES held on February 5-6, 2022 / Sanliurfa, Turkey, Şanlıurfa, Türkiye, 05 Şubat 2022, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

4. INVESTIGATION OF THE EFFECTS OF HELIX ANGLE AND INLET VELOCITY ON COLLECTION EFFICIENCY IN AN AXIAL CYCLONE SEPARATOR

ORUÇ E., KARAGÖZ İ.

10th International Automotive Technologies Congress, Bursa, Türkiye, 06 Eylül 2021, ss.1556, (Tam Metin Bildiri)

5. NUMERICAL SOLUTION OF WATER DROPLET MOTION IN A FUEL CELL CHANNEL WITH TWO OUTLETS USING VOF METHOD

Altıntaş A. G., Çelik E., Karagöz İ.

10th International Automotive Technologies Congress, Bursa, Türkiye, 6 - 07 Eylül 2021, ss.1642-1652, (Tam Metin Bildiri)

6. THREE DIMENSIONEL MODELLING AND PARAMETRIC ANALYSIS OF A PEM FUEL CELL WITH A SERPENTINE FLOW CHANNEL

Kupeli S., ÇELİK E., KARAGÖZ İ.

ISPEC 6th INTERNATIONAL CONFERENCE ON ENGINEERING NATURAL SCIENCES, 24 - 26 Ocak 2020, (Tam Metin Bildiri)

7. A STUDY ON A NEW BIO-INSPIRED WING DESIGN AND 2DANALYSIS OF ITS AERODYNAMIC CHARACHTERISTICS

AYDIN N., KARAGÖZ İ., ÇALIŞKAN M. E.

6th INTERNATIONAL CONFERENCE ON ENGINEERING NATURAL SCIENCESJanuary 24-26, 2020 / SANLIURFA, TURKEY, 24 - 26 Ocak 2020, (Tam Metin Bildiri)

8. NUMERICAL SIMULATION OF FLOW OVER DIFFERENT TYPES OF AIRFOILS

AYDIN N., ÇALIŞKAN M. E., KARAGÖZ İ.

8TH INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES,SARAJEVO (ICAT’19), Sarajevo, Bosna-Hersek, 26 - 30 Ağustos 2019, (Tam Metin Bildiri)

9. An Experimental Study on Cyclone Particle Classifier

ÇALIŞKAN M. E., KARAGÖZ İ., AVCI A., SÜRMEN A.

International Congress on Engineering and Life Science, 26 - 29 Nisan 2018, (Özet Bildiri)

10. An Overview of Biologically Inspired Engineering on Wing Design

GÜNEŞ N., KARAGÖZ İ.

INTERNATIONAL CONGRESS ON ENGINEERING AND LIFE SCIENCE, KASTAMONU, Kastamonu, Türkiye, 26 - 29 Nisan 2018, (Özet Bildiri)

11. Determination of Optimum Insulation Thickness on Different Wall Orientations in a Hot Climate

Arslan E., KARAGÖZ İ.

3rd International Sustainable Buildings Symposium (ISBS), U ARAB EMIRATES, 15 - 17 Mart 2017, cilt.7, ss.145-157, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

12. Design and Performance Analysis of a Virtual Body Mini Cyclone

Çalışkan M. E., KARAGÖZ İ., AVCI A., SÜRMEN A.

8th International Advanced Technologies Symposium, 19 - 22 Ekim 2017, (Tam Metin Bildiri)

13. The Effects of Reynolds Number on the laminar flow past two tandem cylinders with High Blockage in a Channel

KARAGÖZ İ., GÜNEŞ N., ÖZALP A. A.

8th INTERNATIONAL ADVANCEDTECHNOLOGIES SYMPOSIUM, Elazığ, Türkiye, 19 - 22 Ekim 2017, (Tam Metin Bildiri)

14. Investigation of Particle Entrainment Characteristics of a Swirl Jet Impinging on Granular Layers

KARAGÖZ İ., ÇELİK E.

8th International Advanced Technologies Symbosium, 19 - 22 Ekim 2017, (Özet Bildiri)

15. TÜRKİYE’DE GÜNEŞ ENERJİSİ VE BURSA İLİİÇİN BİR UYGULAMA

GÜNEŞ N., KARAGÖZ İ.

TESKON 2017 / TERMODİNAMİK SEMPOZYUMU, İZMİR, İzmir, Türkiye, 19 - 22 Nisan 2017, (Tam Metin Bildiri)

16. A Rewiew on Novel Flow Field Designs for PEM Fuel Cells andSystematic Comparison of Designs

ÇELİK E., KARAGÖZ İ.

2nd International Hydrogen Technologies Congress, Adana, Türkiye, 15 - 18 Mart 2017, (Özet Bildiri)

17. Two New Bio-inspired Distributed and One Side Inlet Honeycomb Flow Field Designsfor PEM Fuel Cells and Performance Investigation of Models via CFD Tools

ÇELİK E., KARAGÖZ İ.

2nd International Hydrogen Technologies Congress, Adana, Türkiye, 15 - 18 Mart 2017, (Özet Bildiri)

18. Pem Yakıt Pillerinde Su Yönetimi ve Performans Artırmaya Yönelik Akış Alanı ve Gaz Dağıtım Kanalı Kesiti Tasarımlarındaki Gelişmelerin İncelenmesi

ÇELİK E., KARAGÖZ İ.

1st International Mediterranean Science and Engineering Congress (IMSEC 2016), 26 - 28 Ekim 2016, ss.3589-3599, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Kitaplar 3

Ansiklopedide Bölümler 1

1. Encyclopedia of Electrochemical Power Sources (Second Edition)

Çelik E., Karagöz I.

Elsevier, ss.228-244, 2025

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

973

H-İndeks (WoS)

Atıf (Scopus)

1073

H-İndeks (Scopus)

Atıf (Scholar)

1690

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Sobiad)

H-İndeks (Sobiad)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Sobiad)

H-İndeks (Sobiad)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim