Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Experimental analysis of the volumetric and thermal efficiency performance of a novel direct piezo-acting CVVT mechanism

SÜRMEN A., KARAMANGİL M. İ., AVCI A., Dirim B., IŞIKLI F., TEKİN M. E., et al.
International Journal of Green Energy , cilt.21, sa.5, ss.948-958, 2024 (SCI-Expanded) identifier identifier

Parametric and General Evaluation of Mathematical Models Used for Critical Diameter Determination in Cyclone Separators

Mumcu A. G., AVCI A.
Separations , cilt.10, sa.5, 2023 (SCI-Expanded) identifier identifier

Investigation into the effects of various parameters on the performance and classification potential of a cyclone classifier

Caliskan M. E., Karagöz İ., Avcı A., Sürmen A.
POWDER TECHNOLOGY , cilt.356, ss.102-111, 2019 (SCI-Expanded) identifier identifier

A new explicit friction factor formula for laminar, transition and turbulent flows in smooth and rough pipes

Avci A., Karagoz İ.
EUROPEAN JOURNAL OF MECHANICS B-FLUIDS , cilt.78, ss.182-187, 2019 (SCI-Expanded) identifier identifier

Effects of separation space diameter on the performance of a novel reverse flow cyclone

Sakin A., KARAGÖZ İ., AVCI A.
SEPARATION SCIENCE AND TECHNOLOGY , cilt.54, sa.15, ss.2450-2460, 2019 (SCI-Expanded) identifier identifier

Performance analysis of axial and reverse flow cyclone separators

Sakin A., KARAGÖZ İ., AVCI A.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION , cilt.144, 2019 (SCI-Expanded) identifier identifier

An experimental investigation into the particle classification capability of a novel cyclone separator

Caliskan M. E., KARAGÖZ İ., AVCI A., SÜRMEN A.
SEPARATION AND PURIFICATION TECHNOLOGY , cilt.209, ss.908-913, 2019 (SCI-Expanded) identifier identifier

Development of a variable-profile cam to enhance the volumetric efficiency of IC engines

SÜRMEN A., ARSLAN R., KOPMAZ O., AVCI A., KARAGÖZ İ., KARAMANGİL M. İ.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.73, ss.63-75, 2017 (SCI-Expanded) identifier identifier

Effects of Geometrical Parameters on the Pressure Drop for a Modified Cyclone Separator

Tan F., KARAGÖZ İ., AVCI A.
CHEMICAL ENGINEERING & TECHNOLOGY , cilt.39, sa.3, ss.576-581, 2016 (SCI-Expanded) identifier identifier

The Effects of Vortex Finder Dimensions on the Natural Vortex Length in a New Cyclone Separator

Tan F., KARAGÖZ İ., AVCI A.
CHEMICAL ENGINEERING COMMUNICATIONS , cilt.203, sa.9, ss.1216-1221, 2016 (SCI-Expanded) identifier identifier

THE USE OF PARAFFIN WAX IN A NEW SOLAR COOKER WITH INNER AND OUTER REFLECTORS

Arabacigil B., YÜKSEL N., AVCI A.
THERMAL SCIENCE , cilt.19, sa.5, ss.1663-1671, 2015 (SCI-Expanded) identifier identifier

Experimental investigation into performance characteristics of reversed flow cyclone separators

Sendogan O., KARAGÖZ İ., AVCI A., SÜRMEN A.
INTERNATIONAL JOURNAL OF GLOBAL WARMING , cilt.6, ss.339-349, 2014 (SCI-Expanded) identifier identifier

Design and performance evaluation of a new cyclone separator

KARAGÖZ İ., AVCI A., SÜRMEN A., Sendogan O.
JOURNAL OF AEROSOL SCIENCE , cilt.59, ss.57-64, 2013 (SCI-Expanded) identifier identifier

Development of a new method for evaluating vortex length in reversed flow cyclone separators

AVCI A., KARAGÖZ İ., SÜRMEN A.
POWDER TECHNOLOGY , cilt.235, ss.460-466, 2013 (SCI-Expanded) identifier identifier

Experimental Investigation of the Natural Vortex Length in Tangential Inlet Cyclones

AVCI A., KARAGÖZ İ., SÜRMEN A., Camuz I.
SEPARATION SCIENCE AND TECHNOLOGY , cilt.48, sa.1, ss.122-126, 2013 (SCI-Expanded) identifier identifier

The thermal analysis of paraffin wax in a box-type solar cooker

YÜKSEL N., Arabacigil B., AVCI A.
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY , cilt.4, sa.6, 2012 (SCI-Expanded) identifier identifier

The effective thermal conductivity of insulation materials reinforced with aluminium foil at low temperatures

Yuksel N., Avci A., Kılıç M.
HEAT AND MASS TRANSFER , cilt.48, ss.1569-1574, 2012 (SCI-Expanded) identifier identifier

Prediction of the maximum-efficiency cyclone length for a cyclone with a tangential entry

Surmen A., Avci A., KARAMANGİL M. İ.
POWDER TECHNOLOGY , cilt.207, ss.1-8, 2011 (SCI-Expanded) identifier identifier

Effects of Surface Roughness on the Performance of Tangential Inlet Cyclone Separators

Kaya F., KARAGÖZ İ., AVCI A.
AEROSOL SCIENCE AND TECHNOLOGY , cilt.45, sa.8, ss.988-995, 2011 (SCI-Expanded) identifier identifier

Closure to "Discussion: 'A Novel Explicit Equation for Friction Factor in Smooth and Rough Pipes' " (2011, ASME J. Fluids Eng., 133, p. 015501)

KARAGÖZ İ., AVCI A.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.133, sa.1, 2011 (SCI-Expanded) identifier

THE PRESENT STUDIES ON EFFECTIVE THERMAL CONDUCTIVITIES OF POROUS MEDIUMS

Yuksel N., AVCI A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.25, sa.2, ss.331-346, 2010 (SCI-Expanded) identifier identifier

Usability of cyclone separators as air filters in vehicles

KARAGÖZ İ., Kaya F., AVCI A.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.52, ss.133-143, 2010 (SCI-Expanded) identifier identifier

A Novel Explicit Equation for Friction Factor in Smooth and Rough Pipes

AVCI A., KARAGÖZ İ.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.131, sa.6, 2009 (SCI-Expanded) identifier identifier

Mathematical modelling of combined diffusion of heat and mass transfer through fabrics

Etemoglu A. B., Ulcay Y., Can M., Avci A.
FIBERS AND POLYMERS , cilt.10, sa.2, ss.252-259, 2009 (SCI-Expanded) identifier identifier

Investigation of the effect of different carbon film thickness on the exhaust valve

KARAMANGİL M. İ., Avci A., Bilal H.
HEAT AND MASS TRANSFER , cilt.44, sa.5, ss.587-598, 2008 (SCI-Expanded) identifier identifier

A model for latent heat energy storage systems

Yuksel N., Avci A., Kilic M.
International Journal of Energy Research , cilt.30, sa.14, ss.1146-1157, 2006 (SCI-Expanded) identifier identifier

Modelling of the pressure drop in tangential inlet cyclone separators

Karagoz İ., Avci A.
AEROSOL SCIENCE AND TECHNOLOGY , cilt.39, sa.9, ss.857-865, 2005 (SCI-Expanded) identifier identifier

Theoretical study of combined heat and mass transfer process during paper drying

Etemoglu A. B., Can M., Avci A., Pulat E.
HEAT AND MASS TRANSFER , cilt.41, sa.5, ss.419-427, 2005 (SCI-Expanded) identifier identifier

Effects of flow and geometrical parameters on the collection efficiency in cyclone separators

Avci A., Karagoz İ.
JOURNAL OF AEROSOL SCIENCE , cilt.34, sa.7, ss.937-955, 2003 (SCI-Expanded) identifier identifier identifier

Experimental study of convective heat transfer under arrays of impinging air jets from slots and circular holes

Can M., Etemoglu A. B., Avci A.
HEAT AND MASS TRANSFER , cilt.38, sa.3, ss.251-259, 2002 (SCI-Expanded) identifier identifier

A theoretical approach to the drying process of thin film layers

Avci A., Can M., Etemoglu A. B.
APPLIED THERMAL ENGINEERING , cilt.21, sa.4, ss.465-479, 2001 (SCI-Expanded) identifier identifier identifier

Theoretical investigation of pressure losses in cyclone separators

Avci A., Karagoz İ.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.28, sa.1, ss.107-117, 2001 (SCI-Expanded) identifier identifier identifier

A mathematical model for the determination of a cyclone performance

Avci A., Karagoz İ.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.27, sa.2, ss.263-272, 2000 (SCI-Expanded) identifier identifier identifier

The analysis of the drying process on unsteady forced convection in thin films of ink

Avci A., Can M.
APPLIED THERMAL ENGINEERING , cilt.19, sa.6, ss.641-657, 1999 (SCI-Expanded) identifier identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Design and Performance Analysis of Virtual Body Mini Cyclone

Çalişkan M. E., Karagöz İ., Avcı A., Sürmen A.
International journal of Research Science and Management , cilt.12, sa.4, ss.57-65, 2017 (Hakemli Dergi)

A Computational Comparison of Flow and Pressure fields in Axial and Reverse Flow Cyclone Separators

SAKİN A., KARAGÖZ İ., AVCI A.
International Journal of Computational and Experimental Science and Engineering (IJCESEN) , cilt.3, sa.2, ss.20-25, 2017 (Hakemli Dergi)

PLAKA GÖVDE BORU VE MİNYATÜR BORU TİP ISI EŞANJÖRLERİNİN TEKNİK VE EKONOMİK AÇIDAN KARŞILAŞTIRILMASI

CANBOLAT A. S., TÜRKAN B., ETEMOĞLU A. B., CAN M., AVCI A.
Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.21, sa.2, ss.107-121, 2016 (Hakemli Dergi)

Alternatif Yakıt Kullanımının Egzoz Supabına Etkisinin İncelenmesi

KARAMANGİL M. İ., AVCI A., EREL G. K.
DEÜ Fen ve Mühendislik Dergisi , cilt.9, sa.1, ss.21-34, 2007 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Design and Performance Analysis of a Virtual Body Mini Cyclone

Çalışkan M. E., KARAGÖZ İ., AVCI A., SÜRMEN A.
8th International Advanced Technologies Symposium, 19 - 22 Ekim 2017

A Computational Comparison of Flow and Pressure Fields in Axial and Reverse Flow Cyclone Separators

sakin a., KARAGÖZ İ., AVCI A.
International Journal of Computational and Experimental Science and Engineering (IJCESEN), 19 - 24 Ekim 2016

a computational comparision of flow and pressure fields in axial and reverse flow cyclone separator

sakin a., KARAGÖZ İ., AVCI A.
3. international conferance on computational and experimental science and engineering, Antalya, Türkiye, 19 - 24 Ekim 2016, ss.345

Investigation of Exergetic Irreversibility with CO2 Emission Measurement in Industrial Enamel Oven

vatandaş s., söğüt m. z., AVCI A.
IEEES-2016, Antalya, Türkiye, 1 - 04 Mayıs 2016, ss.18-23

A NUMERICAL STUDY ON THE EFFECTS OF SURFACE ROUGHNESS FOR A NEW CYCLONE FILTER

Tan F., KARAGÖZ İ., AVCI A.
ICENS2015, Bosna-Hersek, 16 - 19 Mayıs 2016, ss.238

Study on Improving the Thermal Performance of the Solar Chimney System with using Fresnel Lenses

Tan F., KARAGÖZ İ., AVCI A.
International Conference on Engineering and Natural Sciences, 15 - 19 Mayıs 2015, ss.239

Taşıtlar İçin Elektronik Kontrollü Sürüş Emniyet Sistemi Tasarımı

ARSLAN R., AVCI A., SÜRMEN A.
2. Uluslararası Ulaşım Sempozyumu, Türkiye, 1 - 04 Ekim 1998, ss.497-506

Bir Dizel Motorunda Supap Zamanlamasının Etkilerinin Teorik ve Deneysel Olarak İncelenmesi

ARSLAN R., SÜRMEN A., AVCI A.
Beşinci Yanma Sempozyumu, Türkiye, 21 - 23 Temmuz 1997, ss.220-230

Emme Supaplarında Debi Katsayısı Değişimlerinin Deneysel İncelenmesi

ARSLAN R., KARAGÖZ İ., AVCI A.
Beşinci Yanma Sempozyumu, Türkiye, 21 - 23 Temmuz 1997, ss.245-254

Taşıt Eksoz Emisyonlarının Kontrolü ve Bursa Örneği

AVCI A., ARSLAN R., ERDAĞ B.
Birinci Ulusal Ulaşım Sempozyumu, Türkiye, 6 - 07 Mayıs 1996, ss.575-583

Ters Akışlı Kazanlarda Brülör Namlusu Dalma Uzunluğunun Isı Taşınımına Etkisi

KILIÇ M., AVCI A.
10. Ulusal Isı Bilimi ve Tekniği Kongresi, Türkiye, 6 - 08 Eylül 1995, cilt.2, ss.1199-1205

Ocak Artığı Kömürlerin Analizi ve Temizlenmesine Ait Basit Bir Sistem Tasarımıİ.Karamangil, A.Sürmen, A. Avcı. “Ocak Artığı Kömürlerin Analizi ve Temizlenmesine Ait Basit Bir Sistem Tasarımı”, III. Yanma Sempozyumu., Sayfa: 415-422, 19-21 Temmuz 1993, Kirazlıyayla-BURSA.

KARAMANGİL M. İ., SÜRMEN A., AVCI A.
III. Yanma Sempozyumu, Bursa, Türkiye, 19 - 21 Temmuz 1993

Kitap & Kitap Bölümleri

Teknik Tesisat El Kitabı

CAN M., AVCI A., ETEMOĞLU A. B.
Dora Basım-Yayın Dağıtım Ltd.Şti., Bursa, 2017

Teknik Tesisat El Kitabı

Can M., Avcı A., Etemoğlu A. B.
Dora, Bursa, 2008

Metrikler

Yayın

57

Atıf (WoS)

736

H-İndeks (WoS)

15

Atıf (Scopus)

833

H-İndeks (Scopus)

15

Proje

8

Fikri Mülkiyet

3

Tez Danışmanlığı

21

Açık Erişim

20
BM Sürdürülebilir Kalkınma Amaçları