Prof. Dr. YAHYA IŞIK

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Optimum structural design of seat frames for commercial vehicles

Işık Y., Göle M.

MATERIALPRUEFUNG/MATERIALS TESTING , cilt.63, sa.2, ss.138-146, 2021 (SCI-Expanded)

A novel approach to use internally cooled cutting tools in dry metal cutting

IŞIK Y., KUŞ A., COŞKUN S., Ozdemir K., Cakir M. C.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.24, sa.3, ss.239-246, 2017 (SCI-Expanded)

Using internally cooled cutting tools in the machining of difficult-to-cut materials based on Waspaloy

IŞIK Y.

ADVANCES IN MECHANICAL ENGINEERING , cilt.8, sa.5, 2016 (SCI-Expanded)

ANALYSIS OF THE CUTTING TEMPERATURE AND SURFACE ROUGHNESS DURING THE ORTHOGONAL MACHINING OF AISI 4140 ALLOY STEEL VIA THE TAGUCHI METHOD

MOTORCU A. R., IŞIK Y., KUŞ A., ÇAKIR M. C.

MATERIALI IN TEHNOLOGIJE , cilt.50, sa.3, ss.343-351, 2016 (SCI-Expanded)

Influence of cutting parameters on the chip-tool interface temperature during the turning of Waspaloy

IŞIK Y., KUŞ A., Cakir M. C.

MATERIALS TESTING , cilt.57, sa.9, ss.783-789, 2015 (SCI-Expanded)

Thermocouple and Infrared Sensor-Based Measurement of Temperature Distribution in Metal Cutting

KUŞ A., IŞIK Y., Cakir M. C., COŞKUN S., Ozdemir K.

SENSORS , cilt.15, sa.1, ss.1274-1291, 2015 (SCI-Expanded)

An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool

Isik Y.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.56, sa.3, ss.195-201, 2010 (SCI-Expanded)

Tool life and performance comparison of coated tools in metal cutting

Isik Y.

International Journal of Materials and Product Technology , cilt.39, ss.240-250, 2010 (SCI-Expanded)

Investigating the machinability of austempered ductile irons having different austempering temperatures and times

Cakir M. C., Işık Y.

MATERIALS & DESIGN , cilt.29, sa.5, ss.937-942, 2008 (SCI-Expanded)

Investigating the machinability of tool steels in turning operations

Isik Y.

Materials and Design , cilt.28, sa.5, ss.1417-1424, 2007 (SCI-Expanded)

The effects of austempering temperature and time onto the machinability of austempered ductile iron

Cakir M. C., Bayram A., Isik Y., Salar B.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.407, ss.147-153, 2005 (SCI-Expanded)

Finite element analysis of cutting tools prior to fracture in hard turning operations

Cakir M. C., Isik Y.

MATERIALS & DESIGN , cilt.26, sa.2, ss.105-112, 2005 (SCI-Expanded)

Detecting tool breakage in turning aisi 1050 steel using coated and uncoated cutting tools

Cakir M. C., Isik Y.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.159, sa.2, ss.191-198, 2005 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Experimental Investigation of Machinability of Chromium-Nickel Based Steels by Milling Method

IŞIK Y., DİLSİZ M.

International Journal of Innovative Science and Research Technology , cilt.9, sa.5, ss.2809-2818, 2024 (Hakemli Dergi)

The Experimental Investigation of the Machinability of Armor Steels

IŞIK Y., ASMAFİLİZ C.

International Journal of Innovative Science and Research Technology (IJISRT) , cilt.9, sa.4, ss.2220-2228, 2024 (Hakemli Dergi)

Optimization of the Mini Backhoe Excavator’s Arm by HyperWorks Under Static Condition

Işık Y., Khairalla Y.

International Journal of Innovative Science and Research Technology , cilt.9, sa.1, ss.1084-1090, 2024 (Hakemli Dergi)

Fatigue Analysis of Excavator Arm Reduced in Weight by Structural Optimization Methods

Işık Y., Soylu S.

International Journal of Innovative Science and Research Technology , cilt.8, sa.12, ss.1543-1548, 2023 (Hakemli Dergi)

Initial Flank Wear in the First Seconds of Coated Carbide Tools in Turning Operations

Işık Y.

International Journal of Innovative Science and Research Technology , cilt.8, sa.10, ss.170-173, 2023 (Hakemli Dergi)

Determination of Natural Frequency Values In Bending Sheet Metals Using Finite Element Method

Işık Y., Dogdu M.

International Journal of Innovative Science and Research Technology , cilt.8, sa.9, ss.1220-1226, 2023 (Hakemli Dergi)

Investigation of Sound Absorption Performance of Roof Panels in Automobiles

Işık Y., Tuzla M.

SSRG International Journal of Mechanical Engineering , cilt.9, sa.12, ss.1-9, 2022 (Hakemli Dergi)

Analysis of the Fatigue Life of Matrix Elements in the Hole Drilling Process in Sheet Metal Forming Dies

Işık Y., Kır H., Mantarlar M., Yazar M.

SSRG International Journal of Mechanical Engineering , cilt.9, sa.7, ss.1-9, 2022 (Hakemli Dergi)

Comparison of Machinability of Cast Irons with Different Mechanical Properties

Işık Y., Tuzer A.

international journal of mechanical engineering , cilt.9, sa.7, ss.10-18, 2022 (Hakemli Dergi)

Experimental Analysis of Cutting Forces and Finite Element Simulation in Milling Operations

Işık Y., Öztürk E.

International Journal of Mechanical Engineering , cilt.8, sa.11, ss.1-7, 2021 (Scopus)

Weight Optimization of Aluminum Alloys Used in Vehicles

IŞIK Y., Tekin B., Yılmaz A. F., Tatoğlu F., Öztürk D.

International Journal of Mechanical Engineering , cilt.7, sa.11, ss.13-21, 2020 (Scopus)

An Investigation of Working Principles and Developing Mechanical Systems of Passenger Doors of Commercial Vehicles

Köse A., IŞIK Y.

International Journal of Mechanical Engineering , cilt.6, sa.3, ss.1-6, 2019 (Scopus)

A MICRO SPRING PLUNGER GRIPPING MECHANISM DESIGN WITH PIEZOELECTRIC FORCE SENSOR FOR AUTOMATED HANDLING PROCESSES

CANGAR T., IŞIK Y.

International Journal of Research in Engineering and Technology , cilt.7, sa.6, ss.41-48, 2018 (Hakemli Dergi)

Effect of cutting speed on the PVD-Coated carbide insert in the machinng on waspaloy

IŞIK Y.

International Journal of Research in Engineering and Technology , cilt.6, sa.8, ss.48-52, 2017 (Hakemli Dergi)

The Performance Evalution of Ceramic and Carbide Cutting Tools in Machining of Austempered Ductile Irons

IŞIK Y.

Uludağ Üniversity, Journal of The Faculty of Engineering , cilt.19, sa.2, ss.67-76, 2014 (Hakemli Dergi)

Kaplamasız ve CVD Kaplamalı Kesici Takımların Performans Analizi

Çakır M. C., Işık Y.

Makine ve Metal Dergisi , sa.139, ss.118-125, 2003 (Hakemli Dergi)

Tornalama İşlemlerinde Hız Çeliği Kesici Takımların Kırılma Anının Tespiti

Işık Y., Çakır M. C.

Bursa Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , cilt.7, sa.1, ss.211-219, 2002 (Hakemli Dergi)

Hız Çeliği Takımlar için Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkilerinin Deneysel Olarak İncelenmesi

Işık Y., Çakır M. C.

Teknoloji Dergisi, Karabük Üniversitesi (Jestec) , cilt.4, sa.1, ss.111-118, 2001 (Hakemli Dergi)

Tornalama İşlemlerinde Taylor Takım Ömrü Denkleminin Deneysel Olarak İncelenmesi

Işık Y., Çakır M. C.

Teknoloji Dergisi, Karabük Üniversitesi (Jestec) , cilt.3, sa.4, ss.47-56, 2000 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

TAŞITLARDA AĞIRLIK AZALTIMINDA HAFİF MALZEME OLARAK ALÜMİNYUM KULLANIMI

Işık Y., Çağlayan R.

UMTİK, Nevşehir, Türkiye, 31 Ağustos - 03 Eylül 2022, ss.627-640

A PNEUMATICALLY ACTUATED SPRING FORCE PLUNGER GRIPPING MECHANISM DESIGN WITH PIEZOELECTRIC FORCE SENSOR FOR AUTOMATED HANDLING PROCESSES IN AUTOMOTIVE INDUSTRY

CANGAR T., GÖÇMEN A., IŞIK Y.

9th International Automotive Technologies CongressOTEKON 2018 7-8 May 2018, BURSA, 7 - 08 Mayıs 2018

Sertleştirilmiş AISI 4140 Çeliğinin Tornalanması İşlenmesinde Kesme Parametrelerinin ve Takım Kaplama Tipinin Etkilerinin İncelenmesi

IŞIK Y., KUŞ A., MURAT D., ÇAKIR M. C.

8. Uluslararası Talaşlı İmalat Sempozyumu, Antalya, Türkiye, 2 - 04 Kasım 2017

İçten soğutmalı takım tutucu için farklı soğutma sıvılarının performanslarının değerlendirilmesi

IŞIK Y., ÇAKIR M. C.

7. Uluslararası talaşlı imalat sempozyumu, İstanbul, Türkiye, 3 - 05 Kasım 2016

An Experimental Investigation on Effect of Internally Cooled Cutting Tools in the Machining of Difficult to Cut Materials

IŞIK Y., KUŞ A.

4. Annual International Conference on Industrial, Systems and Design Engineering, Athens, Yunanistan, 20 - 23 Haziran 2016

An experimental investigation on effect of internally cooled cutting tools in the machinnig of difficult to cut materials

IŞIK Y., KUŞ A.

4. Annual international conference on industrial systems and design engineering, Atina, Yunanistan, 20 - 23 Haziran 2016

Metrikler

Yayın

Atıf (WoS)

351

H-İndeks (WoS)

Atıf (Scopus)

447

H-İndeks (Scopus)

Atıf (Scholar)

355

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim