Publications & Works

Publication Network

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

Optimum structural design of seat frames for commercial vehicles

IŞIK Y.
Materialprufung, vol.63, no.2, pp.138-146, 2021 (Journal Indexed in SCI) identifier

A novel approach to use internally cooled cutting tools in dry metal cutting

IŞIK Y. , KUŞ A. , COŞKUN S. , Ozdemir K., Cakir M. C.
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, vol.24, no.3, pp.239-246, 2017 (Journal Indexed in SCI) identifier identifier

Using internally cooled cutting tools in the machining of difficult-to-cut materials based on Waspaloy

IŞIK Y.
ADVANCES IN MECHANICAL ENGINEERING, vol.8, no.5, 2016 (Journal Indexed in SCI) identifier identifier

ANALYSIS OF THE CUTTING TEMPERATURE AND SURFACE ROUGHNESS DURING THE ORTHOGONAL MACHINING OF AISI 4140 ALLOY STEEL VIA THE TAGUCHI METHOD

MOTORCU A. R. , IŞIK Y. , KUŞ A. , ÇAKIR M. C.
MATERIALI IN TEHNOLOGIJE, vol.50, no.3, pp.343-351, 2016 (Journal Indexed in SCI) identifier identifier

Influence of cutting parameters on the chip-tool interface temperature during the turning of Waspaloy

IŞIK Y. , KUŞ A. , Cakir M. C.
MATERIALS TESTING, vol.57, no.9, pp.783-789, 2015 (Journal Indexed in SCI) identifier identifier

Thermocouple and Infrared Sensor-Based Measurement of Temperature Distribution in Metal Cutting

KUŞ A. , IŞIK Y. , Cakir M. C. , COŞKUN S. , Ozdemir K.
SENSORS, vol.15, no.1, pp.1274-1291, 2015 (Journal Indexed in SCI) identifier identifier identifier

An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool

Isik Y.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, vol.56, no.3, pp.195-201, 2010 (Journal Indexed in SCI) identifier identifier

Tool life and performance comparison of coated tools in metal cutting

Isik Y.
International Journal of Materials and Product Technology, vol.39, pp.240-250, 2010 (Journal Indexed in SCI Expanded) identifier identifier

Investigating the machinability of austempered ductile irons having different austempering temperatures and times

Cakir M. C. , IŞIK Y.
MATERIALS & DESIGN, vol.29, no.5, pp.937-942, 2008 (Journal Indexed in SCI) identifier identifier

Investigating the machinability of tool steels in turning operations

Isik Y.
Materials and Design, vol.28, no.5, pp.1417-1424, 2007 (Journal Indexed in SCI Expanded) identifier identifier

The effects of austempering temperature and time onto the machinability of austempered ductile iron

Cakir M. C. , Bayram A., Isik Y. , Salar B.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.407, pp.147-153, 2005 (Journal Indexed in SCI) identifier identifier

Finite element analysis of cutting tools prior to fracture in hard turning operations

Cakir M. C. , Isik Y.
MATERIALS & DESIGN, vol.26, no.2, pp.105-112, 2005 (Journal Indexed in SCI) identifier identifier

Detecting tool breakage in turning aisi 1050 steel using coated and uncoated cutting tools

Cakir M. C. , Isik Y.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.159, no.2, pp.191-198, 2005 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

Experimental Analysis of Cutting Forces and Finite Element Simulation in Milling Operations

Işık Y. , Öztürk E.
International Journal of Mechanical Engineering, vol.8, no.11, pp.1-7, 2021 (Refereed Journals of Other Institutions) Creative Commons License

Weight Optimization of Aluminum Alloys Used in Vehicles

IŞIK Y. , Tekin B., Yılmaz A. F. , Tatoğlu F., Öztürk D.
International Journal of Mechanical Engineering, vol.7, no.11, pp.13-21, 2020 (Refereed Journals of Other Institutions) Creative Commons License

An Investigation of Working Principles and Developing Mechanical Systems of Passenger Doors of Commercial Vehicles

Köse A., IŞIK Y.
International Journal of Mechanical Engineering, vol.6, no.3, pp.1-6, 2019 (Refereed Journals of Other Institutions)

A MICRO SPRING PLUNGER GRIPPING MECHANISM DESIGN WITH PIEZOELECTRIC FORCE SENSOR FOR AUTOMATED HANDLING PROCESSES

CANGAR T., IŞIK Y.
International Journal of Research in Engineering and Technology, vol.7, no.6, pp.41-48, 2018 (Refereed Journals of Other Institutions)

Effect of cutting speed on the PVD-Coated carbide insert in the machinng on waspaloy

IŞIK Y.
International Journal of Research in Engineering and Technology, vol.6, no.8, pp.48-52, 2017 (Refereed Journals of Other Institutions)

The Performance Evalution of Ceramic and Carbide Cutting Tools in Machining of Austempered Ductile Irons

IŞIK Y.
Uludağ Üniversity, Journal of The Faculty of Engineering, vol.19, no.2, pp.67-76, 2014 (Refereed Journals of Other Institutions)

Kaplamasız ve CVD Kaplamalı Kesici Takımların Performans Analizi

Çakır M. C. , Işık Y.
Makine ve Metal Dergisi, no.139, pp.118-125, 2003 (Other Refereed National Journals)

Tornalama İşlemlerinde Hız Çeliği Kesici Takımların Kırılma Anının Tespiti

Işık Y. , Çakır M. C.
Bursa Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, vol.7, no.1, pp.211-219, 2002 (National Refreed University Journal)

Hız Çeliği Takımlar için Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkilerinin Deneysel Olarak İncelenmesi

Işık Y. , Çakır M. C.
Teknoloji Dergisi, Karabük Üniversitesi (Jestec), vol.4, no.1, pp.111-118, 2001 (National Refreed University Journal)

Tornalama İşlemlerinde Taylor Takım Ömrü Denkleminin Deneysel Olarak İncelenmesi

Işık Y. , Çakır M. C.
Teknoloji Dergisi, Karabük Üniversitesi (Jestec), vol.3, no.4, pp.47-56, 2000 (National Refreed University Journal)

Refereed Congress / Symposium Publications in Proceedings

A PNEUMATICALLY ACTUATED SPRING FORCE PLUNGER GRIPPING MECHANISM DESIGN WITH PIEZOELECTRIC FORCE SENSOR FOR AUTOMATED HANDLING PROCESSES IN AUTOMOTIVE INDUSTRY

CANGAR T., GÖÇMEN A., IŞIK Y.
9th International Automotive Technologies CongressOTEKON 2018 7-8 May 2018, BURSA, 7 - 08 May 2018

Sertleştirilmiş AISI 4140 Çeliğinin Tornalanması İşlenmesinde Kesme Parametrelerinin ve Takım Kaplama Tipinin Etkilerinin İncelenmesi

IŞIK Y. , KUŞ A. , MURAT D. , ÇAKIR M. C.
8. Uluslararası Talaşlı İmalat Sempozyumu, Antalya, Turkey, 2 - 04 November 2017

İçten soğutmalı takım tutucu için farklı soğutma sıvılarının performanslarının değerlendirilmesi

IŞIK Y. , ÇAKIR M. C.
7. Uluslararası talaşlı imalat sempozyumu, İstanbul, Turkey, 3 - 05 November 2016

An Experimental Investigation on Effect of Internally Cooled Cutting Tools in the Machining of Difficult to Cut Materials

IŞIK Y. , KUŞ A.
4. Annual International Conference on Industrial, Systems and Design Engineering, Athens, Greece, 20 - 23 June 2016

An experimental investigation on effect of internally cooled cutting tools in the machinnig of difficult to cut materials

IŞIK Y. , KUŞ A.
4. Annual international conference on industrial systems and design engineering, Atina, Greece, 20 - 23 June 2016

The Design of Internally Cooled Tools in Orthogonal Metal Cutting

IŞIK Y. , KUŞ A. , ÇAKIR M. C. , COŞKUN S.
3rd Annual International Conference on Industrial, Systems and Design Engineering, ATİNA, ATİNA, Greece, 22 - 25 June 2015

Dik talaş kaldırma işlemlerinde içeriden soğutmalı takım tasarımı

Işık Y. , Kuş A. , Çakır M. C. , Coşkun S.
5. Ulusal Talaşlı İmalat Sempozyumu, Bursa, Turkey, 23 - 25 October 2014

Yüksekokullarında Uluslararası Eğitime Yeni bir Yaklaşım 1 1 Çift diploma modeli Bursa

KUŞ A. , ARSLAN R. , IŞIK Y. , EZENTAŞ R.
I. Uluslararası mesleki eğitim ve öğretim sempozyumu, 2 - 04 September 2014

The Effects of Cutting Parameters on Chip-Tool Interface Temperature and Surface Roughness in Turning of Waspaloy

IŞIK Y. , KUŞ A. , ÇAKIR M. C.
16th International Conference on Machine Design and Production İZMİR, İzmir, Turkey, 30 June - 03 July 2014

İçten Soğutmalı Takım Tutucu Tasarımı ve Üretimi

Işık Y. , Kuş A. , Çakır M. C. , Coşkun S.
IV. Bilgilendirme ve Ar-Ge günleri, Bursa, Turkey, 11 - 13 November 2013

Otomotiv Endüstrisinde Kullanılan Takım Çeliklerinin İşlenebilirliği

Çakır M. C. , Işık Y.
Otomotiv Teknolojileri Kongresi, Bursa, Turkey, 21 - 23 June 2004, pp.54-64

Finite Elements Analysis For Cutting Tools Prior To Fracture Breakage in Turning Operations

Işık Y. , Çakır M. C.
2nd International Conference on Responce Manufacturing, Gaziantep, Turkey, 9 - 13 September 2002, pp.32-44

A Real-Time Tool Breakage Detection System For Coated And Uncoated Cutting Tools in Turning Operations

Çakır M. C. , Işık Y.
2nd International on Conference on Responce Manufacturing, Gaziantep, Turkey, 09 September 2002 - 13 November 2020, pp.223-231

Kaplamasız ve CVD Kaplamalı Kesici Takımların Aşınma Davranışları ve Performanslarının Deneysel Olarak İncelenmesi

Işık Y. , Çakır M. C.
Makina Tasarım ve İmalat Teknolojileri Kongresi Konya , Konya, Turkey, 2 - 03 November 2001, pp.58-66 Sustainable Development

Takım Çeliklerinin Talaşlı İmalatında Kesme Kuvvetleri ile Takım Ömrü Arasındaki İlişkinin Deneysel Olarak İncelenmesi

Işık Y. , Çakır M. C.
9 th International Machine Design and Production Conference, Ankara, Turkey, 26 - 30 June 2000, pp.120-130

Torna Tezgahlarında Kesme Kuvvetlerinin Ölçülmesi ve Analizi için Bir Kuvvet Ölçer Tasarımı ve İmalatı

Çakır M. C. , Işık Y.
9. Mühendislik Sempozyumu, Süleyman Demirel Üniversitesi, Isparta, Turkey, 23 - 25 September 1996, pp.34-45