Yayınlar & Eserler

Yayın Ağı
Makaleler 30
Tümü (30)
SCI-E, SSCI, AHCI (25)
SCI-E, SSCI, AHCI, ESCI (27)
ESCI (2)
Scopus (25)
TRDizin (5)

1. Enhancing the Perceived Quality of a Vehicle Sliding Door Inner Handle Concept Design

Unlukal Ilhan E., ERTAN R., Sert K.
Applied Sciences (Switzerland) , cilt.15, sa.8, 2025 (SCI-Expanded, Scopus) identifier

2. FORMABILITY CAPABILITIES AND MECHANICAL PROPERTIES OF TITANIUM TAILOR-WELDED BLANKS

Erdogan O., Sevinc S., Ertan R.
MATERIALI IN TEHNOLOGIJE , sa.3, ss.421-427, 2024 (SCI-Expanded, Scopus) Creative Commons License identifier

3. STUDYING THE STRENGTH OF DISSIMILAR JOINTS OF AISI 430 AND 301 STAINLESS STEEL WELDED AT DIFFERENT WELDING PARAMETERS TRDNOST ZVARNIH SPOJEV MED NERJAVNIMA JEKLOMA VRSTE AISI 430 IN 301 V ODVISNOSTI OD RAZLIČNIH PARAMETROV VARJENJA

Aras S., ERTAN R.
Materiali in Tehnologije , cilt.58, sa.2, ss.121-127, 2024 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

4. Effect of temperature and rolling direction on the formability of CP2 and Ti-6Al-4V titanium materials

Gokmen S., ERTAN R., Özgül H.
MATERIALS TESTING , cilt.65, sa.11, ss.1743-1751, 2023 (SCI-Expanded, Scopus) identifier identifier

5. A Comparative Study on Conventional and Hybrid Quenching Hot Forming Methods of 22MnB5 Steel for Mechanical Properties and Microstructure

Esiyok F., ERTAN R., SEVİLGEN G., BULUT E., Ozturk F., Alyay I., et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.32, sa.3, ss.1347-1356, 2023 (SCI-Expanded, Scopus) identifier identifier

6. Forming evolution of titanium grade2 sheets

TEKİN M., ERTAN R., Özgül H. G.
Materialpruefung/Materials Testing , cilt.64, sa.1, ss.116-124, 2022 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

7. Effect of deformation temperature on mechanical properties, microstructure, and springback of Ti-6Al-4V sheets

ERTAN R., Cetin G.
REVISTA DE METALURGIA , cilt.57, sa.4, 2021 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

8. THE INVESTIGATION OF THE EFFECTS OF SPRAY PARAMETERS ON THE THERMAL AND MECHANICAL PROPERTIES OF 22MnB5 STEEL DURING HYBRID QUENCHING PROCESS

Sevilgen G., Ertan R., Bulut E., Öztürk F., Esiyok F., Abi T. T., et al.
HEAT TRANSFER RESEARCH , cilt.52, sa.14, 2021 (SCI-Expanded, Scopus) identifier identifier

9. Investigation of the Welding Capability of Aluminum and Titanium Alloy Sheets with IF Steel Sheets by Resistance Spot Welding Method

Mutlusu O., ERTAN R.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.23, sa.4, ss.1003-1013, 2020 (ESCI, TRDizin) identifier

10. The flexural behavior of the epoxy and polyester based composite sandwich structures at subzero temperatures

ERTAN R., KUŞ A., Durgun I.
MATERIALS LETTERS , cilt.272, 2020 (SCI-Expanded, Scopus) identifier identifier

11. Mechanical properties of dissimilar Ti-Al resistance spot welds

ERTAN R.
MATERIALS TESTING , cilt.62, sa.6, ss.597-602, 2020 (SCI-Expanded, Scopus) identifier identifier

12. Shunting effects on the resistance spot welding parameters of DP600

Aydin E., Ertan R.
MATERIALS TESTING , cilt.62, ss.97-103, 2020 (SCI-Expanded, Scopus) identifier identifier

13. ÜÇ BOYUTLU DOKUMA KUMAŞ TAKVİYELİ SANDVİÇ KOMPOZİTLERDE YÜZEYLERDEKİ ELYAF KATMAN SAYISININ EĞİLME DAVRANIŞINA ETKİSİ

ERTAN R., KUŞ A., durgun i.
Uludağ University Journal of The Faculty of Engineering , cilt.24, sa.3, ss.231-240, 2019 (TRDizin)

14. Direnç Nokta Kaynağı ile Birleştirilen Yeni Nesil Çeliklerde Kaynak Akımının Mekanik Özelliklere Etkisi

ERTAN R., Aras S., GÜLER H.
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi , cilt.19, sa.2, ss.461-469, 2019 (TRDizin)

15. Experimental study on the flexural properties of 3D integrated woven spacer composites at room and subzero temperatures

KUŞ A., Durgun I., ERTAN R.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS , cilt.20, sa.5, ss.517-530, 2018 (SCI-Expanded, Scopus) identifier identifier

16. Investigation of mechanical properties of high strength steel welded by resistance spot welding

Aras S., ERTAN R., GÜLER ÖZGÜL H.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.24, sa.1, ss.63-68, 2018 (ESCI, TRDizin) identifier

17. SYNERGISTIC EFFECT OF ORGANIC- AND CERAMIC-BASED INGREDIENTS ON THE TRIBOLOGICAL CHARACTERISTICS OF BRAKE FRICTION MATERIALS

ERTAN R.
MATERIALI IN TEHNOLOGIJE , cilt.50, sa.2, ss.223-228, 2016 (SCI-Expanded, Scopus) identifier identifier

18. EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 30MnB5 BORON STEEL

GÜLER ÖZGÜL H., ERTAN R., Ozcan R.
MATERIALI IN TEHNOLOGIJE , cilt.48, sa.6, ss.971-976, 2014 (SCI-Expanded, Scopus) identifier identifier

19. Investigation of the hot ductility of a high-strength boron steel

GÜLER ÖZGÜL H., ERTAN R., Ozcan R.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.608, ss.90-94, 2014 (SCI-Expanded, Scopus) identifier identifier

20. Experimental investigation of FDM process for improvement of mechanical properties and production cost

Durgun I., ERTAN R.
RAPID PROTOTYPING JOURNAL , cilt.20, sa.3, ss.228-235, 2014 (SCI-Expanded, Scopus) identifier identifier

21. Characteristics of 30MnB5 boron steel at elevated temperatures

GÜLER ÖZGÜL H., ERTAN R., Ozcan R.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.578, ss.417-421, 2013 (SCI-Expanded, Scopus) identifier identifier

22. Effect of Plasma Nitriding Parameters on the Wear Behaviour of AISI D6 Tool Steel

Korkmaz E. E., Bayram A., ERTAN R., YAVUZ N.
MATERIALS TESTING , cilt.55, sa.6, ss.455-461, 2013 (SCI-Expanded, Scopus) identifier identifier

23. Influence of Heat Treatment Parameters on the Microstructure and Mechanical Properties of Boron-Alloyed Steels

GÜLER ÖZGÜL H., ERTAN R., Ozcan R.
MATERIALS TESTING , cilt.54, sa.9, ss.619-624, 2012 (SCI-Expanded, Scopus) identifier

24. Optimisation of GTAW Parameters for the Tensile Strength of AISI 304 Stainless Steel Welds Using the Taguchi Method

Ertan R.
MATERIALS TESTING , cilt.54, sa.3, ss.163-168, 2012 (SCI-Expanded, Scopus) identifier identifier

25. Effects of Welding Parameters on the Mechanical Properties of Inert Gas Welded 6063 Aluminum Alloys

Ertan T., Ertan R., UĞUZ A.
MATERIALS TESTING , cilt.54, sa.1, ss.13-18, 2012 (SCI-Expanded, Scopus) identifier identifier

26. The effects of graphite, coke and ZnS on the tribological and surface characteristics of automotive brake friction materials

ERTAN R., YAVUZ N.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.63, sa.4, ss.245-253, 2011 (SCI-Expanded, Scopus) identifier identifier

27. An experimental study on the effects of manufacturing parameters on the tribological properties of brake lining materials

ERTAN R., YAVUZ N.
WEAR , cilt.268, ss.1524-1532, 2010 (SCI-Expanded, Scopus) identifier identifier

28. BALATA MALZEMELERİNDE KULLANILAN YAPISALLARIN BALATANIN TRİBOLOJİK VE FİZİKSEL ÖZELLİKLERİNE ETKİSİ

ERTAN R., YAVUZ N.
Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.15, sa.1, ss.169-177, 2010 (TRDizin)

29. Optimisation of brake friction material on tribological characteristics and cost using constrained mixture design method

ERTAN R., YAVUZ N.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.39, ss.271-290, 2010 (SCI-Expanded, Scopus) identifier identifier

30. Validation of analytical model of vehicle brake system

Guner R., Yavuz N., Kopmaz O., Ozturk F.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.35, sa.4, ss.331-348, 2004 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 14

1. Effect Of Temperature On The Formability Of Pure (CP2) Titanium Material

Gökmen Ş., ERTAN R., GÜLER ÖZGÜL H.
7. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Ankara, Türkiye, 03 Haziran 2023, (Özet Bildiri)

2. Investigation Of The Mechanical Properties Of Reduced Graphen Oxide Reinforced Chloroprene Rubber Composite Material

Özgül H., Yılmaz E., Yılmaz M., ERTAN R.
7. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Ankara, Türkiye, 03 Haziran 2023, (Tam Metin Bildiri)

3. CASE STUDY ON SIMULATION-BASED DESIGN AND TRY-OUT OF FORMING TOOLS

Coşkun S., ERTAN R., Erdoğan M.
ULUSLARARASI MALZEME MÜHENDİSLİĞİ VE İLERİ İMALAT TEKNOLOJİLERİ KONGRESİ (IMEAMTC'23), İstanbul, Türkiye, 12 Ocak 2023, (Özet Bildiri)

4. Hybrid Quenching Method for Hot Stamping Prototype Process

Sevilgen G., Ertan R., Bulut E., Öztürk F., Eşiyok F., Alyay İ., et al.
10th International Automotive Technologies Congress (OTEKON 2020), Bursa, Türkiye, 6 - 07 Eylül 2021, ss.649-658, (Tam Metin Bildiri)

5. OBTAINING HEMATITE FROM DOMESTIC SCALE (IRON OXIDE) AND SYNTHESISE IT WITH STRONTIUM CARBONATE AND PRODUCE STRONTIUM HEXAFERRITE BASED FERRITIC MAGNET POWDER

Kurtuluş O. U., ERTAN R.
Otekon 2020-Proceedings of the International 10th Automotive Technologies Congress, Bursa, Türkiye, 6 - 07 Eylül 2021, ss.1675-1682, (Tam Metin Bildiri)

6. The Effect of Spray Parameters on The Cooling Rate of High Strength Steel 22MnB5

Sevilgen G., Ertan R., Bulut E., Öztürk F., Eşiyok F., Alyay İ., et al.
10th International Automotive Technologies Congress (OTEKON 2020), Bursa, Türkiye, 6 - 07 Eylül 2021, ss.659-667, (Tam Metin Bildiri)

7. Investigation of Resistance Spot Weldability of Titanium Alloy with Aluminum Alloy

Şentürken B., ERTAN R.
TOKYO SUMMIT-2 International Conference on Innovative Studies, Tokyo, Japonya, 17 - 19 Ağustos 2020, ss.120-125, (Tam Metin Bildiri)

8. OPTIMIZATION OF RESISTANCE SPOT WELDING PARAMETERS WITH USING FACTORIAL DESIGN APPROACH

iş u., ERTAN R., TEKİN M.
otekon 2018, 7 - 08 Mayıs 2018

9. INVESTIGATION OF THE VEHICLE PASSENGER SEATS LEGS PERFORMANCE BY USING THE FINITE ELEMENT METHODS

düvenci f., ERTAN R., çetin g.
otekon 2018, Bursa, Türkiye, 7 - 08 Mayıs 2018, (Tam Metin Bildiri)

10. The effect of fabrication processes and material combinations on the mechanical properties of fibre reinforced polymer composites

ERTAN R.
The IRES Conference/61st International conferences on Engineering and Natural Science, Barselona, İspanya, 19 Haziran 2016, ss.1-4, (Tam Metin Bildiri)

11. Farklı Çeliklerin Kaynağında Isıl İşlemlerin Mekanik Özellikler Üzerindeki Etkisi

Kalmaz K., Hırsava U., Kiraz A. T., ERTAN R., GÜLER H.
OTEKON 2016, 8. Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 23 - 24 Mayıs 2016, (Özet Bildiri)

12. A new automated system approach and improvements in Vibratory Mass Finishing Process

Emir B., Ertan R.
The IRES 17th International Conference, London, Birleşik Krallık, 21 - 22 Kasım 2015, (Tam Metin Bildiri)

13. 30MnB5 Çelik Malzemenin Kırılma Enerjisi Ve Dayanım Değerlerine Işıl İşlem Sıcaklıklarının Etkisi

GÜLER H., ERTAN R., ÖZER H.
Otomotiv Teknolojileri Kongresi (2014), Bursa, Türkiye, 26 - 27 Mayıs 2014, (Tam Metin Bildiri)

14. Otomotiv Mühendisliği Laboratuvarı Projesi

SEVİLGEN G., KARAMANGİL M. İ., ERKUŞ B., SOLMAZ E., ERTAN R., KAMIŞ KOCABIÇAK Z., et al.
Uludağ Üniversitesi Bilgilendirme ve AR-GE Günleri, Türkiye, 13 - 15 Kasım 2012
Metrikler

Yayın

45

Yayın (WoS)

27

Yayın (Scopus)

25

Atıf (WoS)

570

H-İndeks (WoS)

8

Atıf (Scopus)

664

H-İndeks (Scopus)

8

Atıf (Scholar)

39

H-İndeks (Scholar)

3

Proje

7

Tez Danışmanlığı

10

Açık Erişim

13
BM Sürdürülebilir Kalkınma Amaçları