Prof. Dr. NAİM DEREBAŞI

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.34, sa.5, ss.1409-1414, 2021 (SCI-Expanded)

4. Effect of Coating and Annealing on Giant Magneto Impedance in Co and Fe-Based Amorphous Wires

International Journal of Scientific and Technological Research , cilt.6, sa.6, ss.34-41, 2020 (Scopus)

5. Localised Flux Density Distribution around Different Holes on Electrical Steel: Prediction and Calculation

Gücüyener İ., Derebaşı N.

International Journal of Scientific and Technological Research , cilt.6, sa.6, ss.25-33, 2020 (Scopus)

6. Effect of Magnetostriction on Localised Flux Density in Toroidal Amorphous Cores Due To Bending Stress

International Journal of Scientific and Technological Research , cilt.6, sa.7, ss.110-114, 2020 (Scopus)

7. Quantitative Analysis of Magnetic Field Distribution Around Circular Non-Magnetic Region in Grain-Oriented Fe-3% Si Steel

Gunes T., Schaefer R., DEREBAŞI N.

IEEE TRANSACTIONS ON MAGNETICS , cilt.54, sa.2, 2018 (SCI-Expanded)

8. Influence of Hole Geometry on Magnetic Flux Density Distribution in LaserCut Non-oriented Electrical Steels at Power Frequencies

Erdonmez C., DEREBAŞI N., Gunes T.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.30, sa.11, ss.3309-3313, 2017 (SCI-Expanded)

9. Influence of Hole Size and Cutting Method on Localised Flux Density Distribution Around a Hole in Non-oriented Electrical Steels

DEREBAŞI N., Erdonmez C.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.30, sa.6, ss.1643-1648, 2017 (SCI-Expanded)

10. Performance of Novel Thermoelectric Cooling Module Depending on Geometrical Factors

DEREBAŞI N., Eltez M., Guldiken F., Sever A., Kallis K., Kilic H., et al.

JOURNAL OF ELECTRONIC MATERIALS , cilt.44, sa.6, ss.1566-1572, 2015 (SCI-Expanded) Sürdürülebilir Kalkınma

11. Influence of Geometrical Factors on Performance of Thermoelectric Material Using Numerical Methods

DEREBAŞI N., Eltez M., Guldiken F., Sever A., Kallis K., Kilic H.

JOURNAL OF ELECTRONIC MATERIALS , cilt.44, sa.6, ss.2068-2073, 2015 (SCI-Expanded)

12. Influence of Organic Coating on the Giant Magneto Impedance Characteristics of Fe-Rich Amorphous Wire

Caylak O., DEREBAŞI N.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.28, sa.3, ss.767-771, 2015 (SCI-Expanded)

13. Effect of Geometrical Factors on Magnetic Induction Distribution of Toroidal Cores Using Numerical Methods

Derebasi N.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.28, sa.3, ss.761-765, 2015 (SCI-Expanded)

14. Localized Flux Density Distribution Around a Hole in Non-Oriented Electrical Steels

GÜNEŞ T., DEREBAŞI N., Erdonmez C.

IEEE TRANSACTIONS ON MAGNETICS , cilt.51, sa.1, 2015 (SCI-Expanded)

15. Giant Magnetoimpedance Effect: Concept and Prediction in Amorphous Materials

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.26, sa.4, ss.1075-1078, 2013 (SCI-Expanded)

16. Changing of Geometry Related Magnetic Flux Distribution in Electrical Steels Used in Transformer Cores

SENSOR LETTERS , cilt.11, sa.1, ss.122-124, 2013 (SCI-Expanded)

17. Interlaminar Flux Density Distribution at Joints of Overlapping Stacked Electrical Steel and Amorphous Ribbons

KAYA A. A., HACIİSMAİLOĞLU M. C., DEREBAŞI N.

JOURNAL OF MAGNETICS , cilt.15, sa.4, ss.190-193, 2010 (SCI-Expanded)

18. Giant magneto-impedance effect in diamagnetic organic thin film coated amorphous ribbons

PEKSÖZ A., Kaya Y., Taysioglu A. A., DEREBAŞI N., Kaynak G.

SENSORS AND ACTUATORS A-PHYSICAL , cilt.159, sa.1, ss.69-72, 2010 (SCI-Expanded)

19. Giant Magneto-Impedance Effect in Thin Zinc Oxide Coated on Co-Based (2705 X) Amorphous Ribbons

Taysioglu A. A., Kaya Y., Peksöz A., Akay S. K., Derebaşı N., Irez G., et al.

IEEE TRANSACTIONS ON MAGNETICS , cilt.46, sa.2, ss.405-407, 2010 (SCI-Expanded)

20. GMI effect in CuO coated Co-based amorphous ribbons

Taysioglu A. A., PEKSÖZ A., Kaya Y., DEREBAŞI N., Irez G., Kaynak G.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.487, ss.38-41, 2009 (SCI-Expanded)

21. Effect of geometrical properties on giant magneto impedance of Fe based amorphous ribbons

Balkan Physics Letter, Bogazici University Press , cilt.16, ss.161060-161065, 2009 (Hakemli Dergi)

22. Prediction of dynamic hysteresis loops of nano-crystalline cores

Hacıismailoğlu M. C., Küçük İ., Derebaşı N.

EXPERT SYSTEMS WITH APPLICATIONS , cilt.36, sa.2, ss.2225-2227, 2009 (SCI-Expanded)

23. Dynamic hysteresis modelling for nano-crystalline cores

KÜÇÜK İ., HACIİSMAİLOĞLU M. C., DEREBAŞI N.

EXPERT SYSTEMS WITH APPLICATIONS , cilt.36, sa.2, ss.3188-3190, 2009 (SCI-Expanded)

24. Prediction of dynamic hysteresis loops in nano crystalline toroidal cores using artificial neural networks

HACIİSMAİLOĞLU M. C., KAYA A. A., ERTÜRK K., KÜÇÜK İ., DEREBAŞI N.

Journal of Optoelectronics and Advanced Materials - Symposia , cilt.1, sa.3, ss.487-489, 2009 (Hakemli Dergi)

25. Effects of post production techniques for amorphous materials on giant magneto impedance

KAYA A. A., HACIİSMAİLOĞLU M. C., DEREBAŞI N.

Journal of Optoelectronics and Advanced Materials - Symposia , cilt.1, sa.3, ss.440-442, 2009 (Hakemli Dergi)

26. Cutting effect and surface characterization of as cast and post production treated Fe4 3Co68 2Si12 5B15 amorphous wires

Peksöz A., Akay S. K., Ertürk K., Hacıismailoğlu M. C., Derebaşı N., Kaynak Z. G.

Journal of Optoelectronics and Advanced Materials - Symposia , cilt.1, ss.355-358, 2009 (Hakemli Dergi)

27. Mathematical model for cutting effect on magnetic flux distribution near the cut edge of non-oriented electrical steels

PEKSÖZ A., ERDEM S., DEREBAŞI N.

COMPUTATIONAL MATERIALS SCIENCE , cilt.43, sa.4, ss.1066-1068, 2008 (SCI-Expanded)

28. 2D finite-element analysis of interlaminar flux density distribution at joints of zip-type unicore

ERDEM S., DEREBAŞI N., Moses A.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS , cilt.304, sa.2, 2006 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 30

1. Comparison of magnetic properties of toroidal cores using in aerospace industry

7th International Conference on Superconductivity and Magnetism (ICSM2021), Muğla, Türkiye, 21 - 27 Ekim 2021, ss.346, (Özet Bildiri)

2. CRITICAL MAGNETIC MATERIALS USING IN TRANSFORMER CORES OF AEROSPACE INDUSTRY

EURO ASIA 8th. INTERNATIONAL CONGRESS ON APPLIED SCIENCES, Toskent, Özbekistan, 15 - 16 Mart 2021, ss.114-115, (Özet Bildiri)

3. GIANT MAGNETO IMPEDANCE: COATING AND ANNEALING

24th Soft Magnetic Materials Conference, Poznan, Polonya, 4 - 07 Eylül 2019, (Özet Bildiri)

4. Localised Flux Density Distribution around Holes on Electrical Steel: Prediction and Calculation

DEREBAŞI N., Bektaş M. K.

24th Soft Magnetic Materials Conference, 4 - 07 Eylül 2019, (Özet Bildiri)

5. Effect of coating and annealing on giant magneto impedance in Co and Fe-based amorphous wires

DEREBAŞI N., ÇAYLAK O.

6th International Conference on Superconductivity and Magnetism, 29 Nisan - 04 Mayıs 2018, (Özet Bildiri)

6. Magnetostriction effect: measurement, prediction and calculation in amorphous ribbon cores

6th International Conference on Superconductivity and Magnetism, 29 Nisan - 04 Mayıs 2018, (Özet Bildiri)

7. Estimation of localised flux density distribution around holes on electrical steel using numerical methods

DEREBAŞI N., Bektaş M. K.

6th International Conference on Superconductivity and Magnetism, Antalya, Türkiye, 29 Nisan - 04 Mayıs 2018, (Özet Bildiri)

8. The Magnetic and Magneto-Optical Effects of Laser Cutting and Spark Eroding in Electrical Steels

GÜNEŞ T., DEREBAŞI N.

International Advanced Researches Engineering Congress-2017, Osmaniye, Türkiye, 16 - 18 Kasım 2017, (Özet Bildiri)

9. An Approach to Relation between Domain Theory and Engineering Applications:Hole Impact at Transformer Core Joints

GÜNEŞ T., DEREBAŞI N.

International Advanced Researches Engineering Congress-2017, Osmaniye, Türkiye, 16 - 18 Kasım 2017, (Özet Bildiri)

10. Transformer Core Design Depending on Magnetic Properties and Microstructures of Goss Texture Fe-3Si Steel

GÜNEŞ T., DEREBAŞI N.

23rd Soft Magnetic Materials Conference, 10 - 13 Eylül 2017, (Özet Bildiri)

11. Influence of Magnetostriction on Localised Flux DensityDistribution in Different Type of Amorphous Cores

International Conferenceon Oxide Materialsfor Electronic Engineering –fabrication, propertiesand applicationsOMEE-2017, 29 Mayıs - 02 Haziran 2017, (Özet Bildiri)

12. Localised Flux Density Variation Around a Different Type Holes onElectrical Steel Using Numerical Methods

DEREBAŞI N., Bektaş M. K., Çaylak O.

International Conferenceon Oxide Materialsfor Electronic Engineering –fabrication, propertiesand applicationsOMEE-2017, 29 Mayıs - 02 Haziran 2017, (Özet Bildiri)

13. Effect of magnetostriction of localised flux density on amorphous bent cores

11th European Magnetic Sensors and Actuators, Torino, 24 - 30 Temmuz 2016, (Özet Bildiri)

14. An approach for lamination transformer core design relation between magnetic properties and microstructure in Fe 3 Si steel

GÜNEŞ T., Schaefer R., DEREBAŞI N.

11th European Magnetic Sensors and Actuators Conference, 12 - 15 Temmuz 2016, (Özet Bildiri)

15. Influence of annealing on giant magneto impedance in Co and Fe based ZnO coated amorphous wires

DEREBAŞI N., Çaylak O.

11th European Magnetic Sensors and Actuators Conference, 12 - 15 Temmuz 2016, (Özet Bildiri)

16. Estimation of localised flux density distribution around different type geometrical holes on NO electrical steel using numerical methods

GÜNEŞ T., Schaefer R., DEREBAŞI N.

11th European Magnetic Sensors and Actuators Conference, 12 - 15 Temmuz 2016, (Özet Bildiri)

17. Effect of coating with different chemicals on giant magneto impedance in Co and Fe based amorphous wires

Çaylak O., DEREBAŞI N.

11th European Magnetic Sensors and Actuator Conference, 12 - 15 Temmuz 2016, (Özet Bildiri)

18. Investigation of magnetic properties and domain structures of Fe 3 Si steel in terms of Hole Impact and energy efficiency

11th European Magnetic Sensors and Actuators Conference, 12 - 15 Temmuz 2016, (Özet Bildiri) Sürdürülebilir Kalkınma

19. Influence of Hole Geometry on Magnetic Flux Density Distribution in LaserCut Non oriented Electrical Steels at Power Frequencies

Erdönmez Ç., DEREBAŞI N., GÜNEŞ T.

5th International Conference on Supercunductivity and Magnetism, 24 - 30 Nisan 2016, (Özet Bildiri)

20. PREDICTION OF FLUX DENSITY DISTRIBUTION AROUND A HOLE MAKING WITH DIFFERENT CUTTING METHODS ON NO ELECTRICAL STEEL USING NUMERICAL METHODS

5th International Conference on Superconductivity and Magnetism, 24 - 30 Nisan 2016, (Özet Bildiri)

21. Influence of Hole Size and Cutting Method on Localised Flux Density Distribution around a Hole inNO Electrical Steels

DEREBAŞI N., Erdönmez Ç.

5th International Conference on Supercunductivity and Magnetism, 24 - 30 Nisan 2016, (Özet Bildiri)

22. EFFECT OF HOLE GEOMETRY ON FLUX DENSITY DISTRIBUTION IN ABRASIVE WATERJET CUTTING NON ORIENTED ELECTRICAL STEELS AT POWER FREQUENCIES

DEREBAŞI N., Erdönmez Ç.

5th International Conference on Superconductivity and Magnetism, 24 - 30 Nisan 2016, (Özet Bildiri)

23. EFFECT OF HOLE SIZE ON FLUX DENSITY DISTRIBUTION IN ABRASIVE WATERJET CUT NON ORIENTED ELECTRICAL STEELS AT POWER FREQUENCIES

DEREBAŞI N., Erdönmez Ç.

5th International Conference on Superconductivity and Magnetism, 24 - 30 Nisan 2016, (Özet Bildiri)

24. Magnetic Behavior of poly (Divinylbenzene)/BAFE12O19 and FE3O4 Nanocomposites

AKAY S. K., PEKSÖZ A., KARA A., DEREBAŞI N.

21th Soft Magnetic Conference, Budapest, Macaristan, 1 - 04 Nisan 2013, (Özet Bildiri)

25. Changing of Geometry Related Magnetic Flux Distribution in Electrical Steels Used in Transformer Cores

Emsa 2010, 4 - 07 Temmuz 2010, (Özet Bildiri)

26. Mathematical model for cutting effect on magnetic flux distribution near the cut edge of non oriented electrical steels

PEKSÖZ A., ERDEM S., DEREBAŞI N.

Soft Magnetic Materials Conference (SMM18), 2 - 05 Eylül 2007, (Özet Bildiri)

27. Giant magneto impedance effect in as-cast and post production treated Fe4.3Co68.2Si12.5B15 amorphous wires

Caylak O., DEREBAŞI N.

6th International Conference of the Balkan-Physical-Union, İstanbul, Türkiye, 22 - 26 Ağustos 2006, cilt.899, ss.773, (Tam Metin Bildiri)

28. Normal flux density distribution at joints of overlap stacked electrical steel laminations