Yayınlar & Eserler

Yayın Ağı
Makaleler 34
Tümü (34)
SCI-E, SSCI, AHCI (27)
SCI-E, SSCI, AHCI, ESCI (27)
Scopus (28)
TRDizin (5)
Diğer Yayınlar (1)

1. A Novel Hybrid Technique for Enhancing Mechanical Properties in Additively Manufactured Steels

YILMAZ M. S., Kayacan M. Y., Alshihabi M.
International Journal of Precision Engineering and Manufacturing , cilt.26, sa.11, ss.3103-3121, 2025 (SCI-Expanded, Scopus) identifier identifier

2. Mechanical Characterization of Meta-Materials Manufactured by a Novel Hybrid SLM Technique Utilizing Powder Metallurgy

Kayacan M. Y., YILMAZ M. S., Üzün A.
Metals and Materials International , cilt.31, sa.6, ss.1541-1556, 2025 (SCI-Expanded) identifier

3. AĞIR SANAYİİ KARBONSUZLAŞTIRMA ve YEŞİL ÇELİKLER

Yilmaz M. S., Yilmaz F.
Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.30, sa.1, ss.293-304, 2025 (Hakemli Dergi) identifier

4. Evaluation of energy absorption performance and Johnson-Cook parameters of lattice-structured steel parts manufactured via SLM

YILMAZ M. S., Kayacan M. Y., Alshihabi M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.137, sa.9, ss.5293-5306, 2025 (SCI-Expanded) identifier identifier

5. Development of an Alternative Heat Treatment to the Traditional T6 Heat Treatment of AlSi10Mg Alloy Produced by Additive Manufacturing

Tütük İ., Ural M. M., YILMAZ M. S., Özer G.
Journal of Materials Engineering and Performance , sa.4, ss.3112-3122, 2025 (SCI-Expanded) identifier identifier

6. Experimental Study on the Influence of Load-Equalizing Devices on Planet Loads in a Planetary Gear Set †

Ivanov V., Alexandrov A., Tomova-Damyanova E., Vountzoukli K., YILMAZ M. S., Amygdalopoulou A., et al.
Engineering Proceedings , cilt.104, sa.1, 2025 (Scopus) identifier

7. Impact and Modal Characteristics of Steels Manufactured by a Novel Hybrid Selective Laser Melting Method

Kayacan M. Y., YILMAZ M. S., Alshihabi M.
JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES , cilt.12, sa.Suppl 2, ss.1907-1928, 2024 (SCI-Expanded) identifier identifier

8. Effects of Retrogression and Re-aging (RRA) Processes on Corrosion Properties in AA 7020 Aluminium Alloy

YILMAZ M. S.
Journal of Materials Engineering and Performance , cilt.33, sa.20, ss.11231-11239, 2024 (SCI-Expanded) identifier

9. Effect of copper powder addition on the product quality of sintered stainless steels

YILMAZ M. S., Kayacan M. Y., Uzun A.
MATERIALS TESTING , cilt.66, ss.611-624, 2024 (SCI-Expanded) identifier identifier

10. Effects of heat treatment on surface integrity and wear performance of Inconel 718 alloy fabricated by laser powder bed fusion process additive manufacturing under different laser power and scanning speed parameters

Sunay N., Kaya M., YILMAZ M. S., KAYNAK Y.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.45, sa.8, 2023 (SCI-Expanded) identifier identifier

11. Aging heat treatment of additively manufactured maraging steels in nitrogen containing atmospheres

Çakan D., Ertuğrul O., YILMAZ M. S.
Materials Today Communications , cilt.35, 2023 (SCI-Expanded) identifier identifier

12. Dry sliding wear behavior of 316 L stainless steel produced by laser powder bed fusion: A comparative study on test temperature

Khan H. M., Yilmaz M. S., Karabeyoğlu S. S., KISASÖZ A., Özer G.
Materials Today Communications , cilt.34, 2023 (SCI-Expanded) identifier identifier

13. Effect of heat treatments on the microstructure and wear behaviour of a selective laser melted maraging steel

Ozer G., Khan H. M., Tarakci G., Yilmaz M. S., Yaman P., Karabeyoglu S. S., et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.236, sa.6, ss.2526-2535, 2022 (SCI-Expanded) identifier identifier

14. Effect of Drag Finish Post-processing on Surface Integrity and Wear Behavior of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Gunessu E., Yilmaz M. S., Tascioglu E., Sharif S., KAYNAK Y.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.31, sa.12, ss.9962-9971, 2022 (SCI-Expanded) identifier identifier

15. A Determination of the Corrosion and Microstructure Properties of AlSi10Mg Material Produced by Different Direct Metal Laser Sintering (DMLS) Process Parameters

YILMAZ M. S.
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi , cilt.11, sa.3, ss.791-797, 2022 (Hakemli Dergi) identifier

16. Effect of building orientations and heat treatments on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties, fracture mechanism and corrosion behavior

Tarakci G., Khan H. M., Yilmaz M. S., Ozer G.
RAPID PROTOTYPING JOURNAL , cilt.28, sa.8, ss.1609-1621, 2022 (SCI-Expanded) identifier identifier

17. Corrosion of Additively Manufactured Metallic Components: A Review

Khan H. M., Ozer G., Yilmaz M. S., Koc E.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.47, sa.5, ss.5465-5490, 2022 (SCI-Expanded) identifier identifier

18. Improvement of Corrosion Resistance of Maraging Steel Manufactured by Selective Laser Melting Through Intercritical Heat Treatment

Khan H. M., Ozer G., Yilmaz M. S., Tarakci G.
CORROSION , cilt.78, sa.3, ss.239-248, 2022 (SCI-Expanded) identifier identifier identifier

19. INVESTIGATION OF THE EFFECT OF HEAT TREATMENT CONDITIONS ON HARDNESS PROPERTIES OF MARAGING STEELS PRODUCED BY ADDITIVE MANUFACTURING

Öksüzcan İ., ÇAKAN D., YILMAZ M. S., ERTUĞRUL O.
International Journal of 3D Printing Technologies and Digital Industry , cilt.5, sa.3, ss.654-662, 2021 (Hakemli Dergi) identifier

20. INVESTIGATION OF THE EFFECTS OF DIFFERENT RETROGRESSION AND RE-AGING PARAMETERS APPLIED TO THE 7075 ALLOY ON THE MICRO-ARC OXIDATION PROCESS

Yilmaz M. S., Ozer G., Sahin O., KARAASLAN A.
SURFACE REVIEW AND LETTERS , cilt.28, sa.09, 2021 (SCI-Expanded) identifier identifier

21. Effects of hot isostatic pressing and heat treatments on structural and corrosion properties of direct metal laser sintered parts

Yilmaz M. S., ozer G., Oter Z. C., Ertugrul O.
RAPID PROTOTYPING JOURNAL , cilt.27, sa.5, ss.1059-1067, 2021 (SCI-Expanded) identifier identifier

22. Micro Arc Oxidation Coating Parameter Property Relationship

YILMAZ M. S., ÖZER G., ŞAHİN O., KARAASLAN A.
MATERIALS PERFORMANCE , cilt.60, sa.1, ss.40-44, 2021 (SCI-Expanded)

23. Effect of HIP process and subsequent heat treatment on microstructure and mechanical properties of direct metal laser sintered AlSi10Mg alloy

Ertugrul O., Oter Z. C., Yilmaz M. S., Sahin E., Coskun M., Tarakci G., et al.
RAPID PROTOTYPING JOURNAL , cilt.26, sa.8, ss.1421-1434, 2020 (SCI-Expanded) identifier identifier

24. Investigation of the surface quality and dimensional accuracy of polymer patterns produced by selective laser sintering (SLS) method for investment casting (IC)

Ozer G., Ozbay B., Oter Z. C., Tarakci G., Yilmaz M. S., Bulduk M. E., et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH , cilt.33, sa.2-3, ss.146-152, 2020 (SCI-Expanded) identifier identifier

25. Investigation of the effects of different heat treatment parameters on the corrosion and mechanical properties of the AlSi10Mg alloy produced with direct metal laser sintering

Ozer G., Tarakci G., Yilmaz M. S., Oter Z. C., Surmen O., Akca Y., et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION , cilt.71, sa.3, ss.365-373, 2020 (SCI-Expanded) identifier identifier

26. Investigation of High Energy Single Pulse Effect on Micro Arc Oxidation (MAO) Process on Aluminium

YILMAZ M. S., ŞAHİN O.
International Journal of Mining, Materials, and Metallurgical Engineering (IJMMME) , cilt.5, 2019 (Hakemli Dergi)

27. Support optimization for overhanging parts in direct metal laser sintering

Oter Z. C., Coskun M., Akca Y., Surmen O., Yilmaz M. S., Ozer G., et al.
OPTIK , cilt.181, ss.575-581, 2019 (SCI-Expanded) identifier identifier

28. Benefits of laser beam based additive manufacturing in die production

Oter Z. C., Coskun M., Akca Y., Surmen O., Yilmaz M. S., Ozer G., et al.
OPTIK , cilt.176, ss.175-184, 2019 (SCI-Expanded) identifier identifier

29. Applying high voltage cathodic pulse with various pulse durations on aluminium via micro-arc oxidation (MAO)

Yilmaz M. S., Sahin O.
SURFACE & COATINGS TECHNOLOGY , cilt.347, ss.278-285, 2018 (SCI-Expanded) identifier identifier

30. The application of Zirconium Base Coatings on Steel Surfaces by Using Electro-Spark Deposition (ESD) Method

KORKMAZ K., YILMAZ M. S.
Afyon Kocatepe University Journal of Sciences and Engineering , cilt.17, sa.2, ss.704-709, 2017 (Hakemli Dergi)

31. Effects of Pulse Duration on Structure and Surface Characteristics of Micro-Arc Oxidation Coatings Formed on Aluminum Alloy

Yilmaz M. S., Sahin O.
ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.673-676, 2016 (SCI-Expanded) Creative Commons License identifier identifier

32. Mikro Ark Oksidasyon (MAO) Prosesinin Eklemeli Üretim (AM) Metodu ile Uyumluluğunun Araştırılması

YILMAZ M. S., Clare A. T., ŞAHİN O.
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.16, sa.1, ss.36-41, 2016 (Hakemli Dergi)

33. Fabrication of Bioactive Coatings on Steel Substrates by Electro-Spark Deposition (ESD) and Micro-Arc Oxidation (MAO) Methods

Yilmaz M. S., Cakir A., Ribalko A., Korkmaz K.
ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1277-1281, 2015 (SCI-Expanded) Creative Commons License identifier identifier

34. A Study on Modification of Micro-Alloy Steel Surfaces with Different Hard Materials Via Electro-Spark Deposition Method

Cakir A., Yilmaz M. S., Ribalko A., Korkmaz K.
ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1410-1413, 2015 (SCI-Expanded) Creative Commons License identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 26

1. HYBRID MANUFACTURING METHOD OF MULTIFUNCTIONAL BY SELECTIVE LASER MELTING AND POWDER METALLURGY

KAYACAN M. Y., YILMAZ M. S., Mamoun A.
Additive Manufacturing Conference Türkiye – 2024, 25 - 27 Nisan 2024, (Özet Bildiri)

2. Analysis Of Defects During the Manufacturing Of Lattice Parts By Selective Laser Sintering

KAYACAN M. Y., YILMAZ M. S., Üzün A.
7th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, İstanbul, Türkiye, 25 - 27 Ekim 2023, (Özet Bildiri)

3. ANGLE DEPENDENT PRODUCTIVITY RESEARCH OF CONFORMAL CHANNEL GEOMETRY SECTION IN LPBF

YILMAZ M. S., ÇALIŞKAN C. İ., ÖZER G.
ADDITIVE MANUFACTURING CONFERENCE TURKEY 2022, Aydın, Türkiye, 6 - 08 Ekim 2022, (Özet Bildiri)

4. DEVELOPMENT OF ALUMINUM ALLOY POWDERS FOR ADDITIVE MANUFACTURING

Bilgiler B., YILMAZ M. S., Sorucu İ. Ş., Alanyalı S., Genç B.
ADDITIVE MANUFACTURING CONFERENCE TURKEY 2022, Aydın, Türkiye, 6 - 08 Ekim 2022, (Özet Bildiri)

5. Investigation of the Effect of Heat Treatment Atmosphere on Corrosion Properties of Direct Metal Laser Sintering of Maraging 300 Steels

YILMAZ M. S., Öksüzcan İ., Çakan D., ERTUĞRUL O.
2nd Global Summit on 3D Printing & Additive Manufacturing, Kopenhang, Danimarka, 13 Haziran 2022, (Özet Bildiri)

6. Aging treatment of Additively Manufactured Maraging 300 Steels under Ar/H2 Atmosphere

Öksüzcan İ., Çakan D., ERTUĞRUL O., YILMAZ M. S.
4. Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’21 ), Türkiye, 28 - 29 Mayıs 2021, (Özet Bildiri)

7. Structure and Properties of Additively Manufactured Maraging Steels after Aging Treatment under N2 Atmosphere

Çakan D., Öksüzcan İ., YILMAZ M. S., ERTUĞRUL O.
4. Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’21 ), Türkiye, 28 - 29 Mayıs 2021, (Özet Bildiri)

8. Effects Of Energy Input On Mıcrostructure/Surface Propertıes Of Addıtıvely Manufactured Parts

YILMAZ M. S.
V. International Scientific and Vocational Studies Congress–Engineering (BILMES EN 2020), Türkiye, 12 - 13 Aralık 2020, (Tam Metin Bildiri)

9. The Effects of Hatch distance on the Thermal and Mechanical Properties of AlSi10Mg Parts in Direct Metal Laser Sintering (DMLS) Method

YILMAZ M. S., ÖZER G., ÖTER Z. Ç., TARAKÇI G., COŞKUN M., KOÇ E., et al.
IV. International Scientific and Vocational Congress-Engineering, Ankara, Türkiye, 7 - 10 Kasım 2019, (Tam Metin Bildiri)

10. EKLEMELİ İMALAT (DMLS) KULLANILARAK ÜRETİLMİŞ ALSİ10MG NUMUNELERİNDE PARAMETRE/YÜZEY ÖZELLİK İLİŞKİSİNİN İRDELENMESİ

YILMAZ M. S.
II. Ulusal Mühendislikte Bilimsel ve Mesleki Çalışmaları Kongresi, Türkiye, 7 - 10 Kasım 2019, (Tam Metin Bildiri)

11. INFLUENCE OF HOT ISOSTATIC PRESSING AND SUBSEQUENT HEAT TREATMENT ON MECHANICAL PROPERTIES OF DIRECT METAL LASER SINTERED ALSI10MG ALLOY

ERTUĞRUL O., Öter Z., YILMAZ M. S., Şahin E., Coşkun M., Tarakçı G., et al.
Additive Manufacturing Conference Turkey, İstanbul, Türkiye, 17 - 18 Ekim 2019, (Tam Metin Bildiri)

12. Ekstrüzyon Preslerinde Enerji Yönetimi

Akça Y., ÖZER G., YILMAZ M. S., KOÇ E.
9th International Aluminium Semposium (ALUS’xx09), İstanbul, Türkiye, 10 - 11 Ekim 2019, (Tam Metin Bildiri)

13. Effect of Micro Arc Oxidation (MAO) Parameters on Coating/Interface Behaviour of 7075-T6 Aluminium Alloy

YILMAZ M. S., ÖZER G., ŞAHİN O., KARAASLAN A.
8th International Conference on Advanced Technologies, Sarajevo, Bosna-Hersek, 26 - 30 Ağustos 2019, (Tam Metin Bildiri)

14. Investigation of the High Energy Single Pulses Affect on Micro Arc Oxidation Process on Aluminium

YILMAZ M. S., ŞAHİN O.
4th World Congress on Mechanical, Chemical, and Material Engineering (MCM’xx18), 16 - 18 Ağustos 2018, (Tam Metin Bildiri) identifier

15. Effect of Electrical Parameters on Tribology of Micro Arc Oxidation (MAO) Coatings Formed on Aluminum

YILMAZ M. S., ŞAHİN O.
2nd International Conference on Tribology, 18 - 20 Nisan 2018, (Tam Metin Bildiri)

16. The Optimization of the Coating Process Parameters by Electro-Spark Deposition (ESD) Technique Using Steel/Inconel Couple

YILMAZ M. S., KORKMAZ K., ÇAKIR A., DOĞRU C.
3rd Iron and Steel Symposium(UDCS’17)3-5April 2017 Karabuk-TURKEY, 3 - 05 Nisan 2017, (Özet Bildiri)

17. Seçici Lazer Ergitme (SLM) Metodu ile Üretilmiş AlSi10Mg Parçalarının Mikro Ark Oksidsayon (MAO) ile Yüzey Pürüzlülüğünün Düşürülmesi

YILMAZ M. S., Clare A. T.
1.International Mediterranean Science and Engineering Congress, 26 - 28 Ekim 2016, (Tam Metin Bildiri)

18. Mikro Ark Oksidasyon (MAO) Prosesinin Eklemeli Üretim (AM) Metodu ile Uyumluluğunun Araştırılması

YILMAZ M. S., Clare A. T., ŞAHİN O.
1.Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Konferansı, 21 - 22 Nisan 2016, (Tam Metin Bildiri)

19. Mikro Ark Oksidasyon (MAO) Yönteminde Darbe Vuruş Süresinin Kaplama Özelliklerine Etkisi

YILMAZ M. S., ŞAHİN O.
1.Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Konferansı, 21 - 22 Nisan 2016, (Tam Metin Bildiri)

20. Effects of Pulse Duration on Structure and Surface Characteristics of Micro Arc Oxidation Coatings Formed on Aluminum Alloy

YILMAZ M. S., ŞAHİN O.
5th International Advances in Applied Physics and Materials Science Congress, 16 - 19 Nisan 2015, (Özet Bildiri)

21. A Study on Modification of Micro Alloy Stell Surfaces with Different Hard Materials by Using Electro Spark Deposition Methods

ÇAKIR A., YILMAZ M. S., RİBALKO A., KORKMAZ K.
4th International Advances in Applied and Materials Science Congress, 24 - 27 Nisan 2014, (Özet Bildiri)

22. The Effects of Process Parameters of The Duplex Coatings Produced on Steel 0.6C by Electro Sparks (ESD) and Micro Arc Oxidation (MAO)

YILMAZ M. S., ÇAKIR A., KORKMAZ K.
Uluslararası 11. Kimyasal Fizik Kongresi, 17 - 18 Ekim 2014, (Özet Bildiri)

23. Application of Electro Spark Deposition and Micro Arc Oxidation Techniques on Steel Surfaces

ÇAKIR A., YILMAZ M. S., KORKMAZ K.
Uluslararası 11. Kimyasal Fizik Kongresi, 17 - 18 Ekim 2014, (Özet Bildiri)

24. Fabrication of Bioactive Coatings on Steel Substrates by Electro Spark Deposition (ESD) and Micro Arc Oxidation (MAO) Methods

YILMAZ M. S., ÇAKIR A., RİBALKO A., KORKMAZ K.
4th International Advaces in Applied and Materials Science Congress, 24 - 27 Nisan 2014, (Özet Bildiri)

25. Improving the Surface Properties of Cp Ti by Pulsed Electro Spark Depositon

YILMAZ M. S., ATAR E., ŞAHİN O., KAYALI E. S.
3rd International Advances in Applied and Materials Science Congress, 24 - 28 Nisan 2013, (Özet Bildiri)

26. Saf Titanyum Malzeme Yüzeyinde AlüminyumTitanyum İntermetalik Tabakasını Oluşturulması

YILMAZ M. S., ATAR E., ŞAHİN O., KAYALI E. S.
6.Alüminyum Sempozyumu, 3 - 04 Ekim 2013, (Tam Metin Bildiri)
Kitaplar 4

1. Yönlendirilmiş Enerji Yığma Yöntemleri

YILMAZ O., YILMAZ M. S., BAYKASOĞLU C.
Tasarım Felsefesinin Değiştiren Yeni Bir İmalat Anlayışı: Eklemeli İmalat, YASA EVREN, Editör, Nobel Akademik, ss.61-92, 2024

2. Sac Laminasyon Yöntemleri

YILMAZ O., YILMAZ M. S.
Tasarım Felsefesini Değiştiren Yani Bir İmalat Anlayışı: Eklemeli İmalat, YASA EVREN, Editör, Nobel Akademik, ss.207-226, 2024

3. Corrosion Behaviour of Additive Manufactured Metals

ÖZER G., YILMAZ M. S.
Springer Handbook of Additive Manufacturing, , Editör, Springer International Publishing, ss.751-776, 2023

4. Heat Treatment of Additive Manufactured Metals

YILMAZ M. S., ÖZER G.
Springer Handbook of Additive Manufacturing, , Editör, Springer International Publishing, ss.741-750, 2023
Metrikler

Yayın

64

Yayın (WoS)

27

Yayın (Scopus)

29

Atıf (WoS)

245

H-İndeks (WoS)

10

Atıf (Scopus)

285

H-İndeks (Scopus)

10

Atıf (Scholar)

396

H-İndeks (Scholar)

11

Proje

6

Tez Danışmanlığı

1

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları