Effects of heat treatment on surface integrity and wear performance of Inconel 718 alloy fabricated by laser powder bed fusion process additive manufacturing under different laser power and scanning speed parameters


Sunay N., Kaya M., YILMAZ M. S., KAYNAK Y.

Journal of the Brazilian Society of Mechanical Sciences and Engineering, cilt.45, sa.8, 2023 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 45 Sayı: 8
  • Basım Tarihi: 2023
  • Doi Numarası: 10.1007/s40430-023-04298-4
  • Dergi Adı: Journal of the Brazilian Society of Mechanical Sciences and Engineering
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Aerospace Database, Communication Abstracts, Compendex, INSPEC, Metadex, Civil Engineering Abstracts
  • Anahtar Kelimeler: Additive manufacturing, Heat treatment, Inconel 718, Laser powder bed fusion, Surface integrity
  • Bursa Uludağ Üniversitesi Adresli: Evet

Özet

As with all additive manufacturing processes, selecting appropriate process parameters in the laser powder bed fusion (LPBF) process plays an important role in the surface integrity and mechanical behavior of Inconel 718 components. Hatch distance, laser power, laser scanning speed and layer thickness are the main parameters that can be altered in the LPBF process. This study focuses on the role of laser power and scanning speed when hatch distance is larger than laser spot size on product properties. This work reveals that LPBF process parameters significantly impact the fabricated Inconel 718 material properties. However, although the material properties are enhanced by selecting appropriate process parameters, the components need post-processing methods to have the desired properties. Heat treatment was applied as a post-process to obtain parts with the desired material properties. The effect of heat treatment applied to the parts fabricated at various laser power and laser scanning speeds on the parts’ surface integrity, and mechanical performance is comprehensively presented. Determining the details of the interactions of different production parameters with heat treatment is one of the motivations of this study. The presented results establish that heat treatment can change specimens’ microstructural aspects. The results also show a 10% increase in microhardness and a 14% increase in wear performance of specimens, due to the final state of the microstructure after heat treatment.