A Study on Modification of Micro-Alloy Steel Surfaces with Different Hard Materials Via Electro-Spark Deposition Method

Creative Commons License

Cakir A., Yilmaz M. S., Ribalko A., Korkmaz K.

ACTA PHYSICA POLONICA A, cilt.127, sa.4, ss.1410-1413, 2015 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 127 Sayı: 4
  • Basım Tarihi: 2015
  • Doi Numarası: 10.12693/aphyspola.127.1410
  • Dergi Adı: ACTA PHYSICA POLONICA A
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1410-1413
  • Bursa Uludağ Üniversitesi Adresli: Hayır

Özet

In this study, micro alloy steel (St 35) surfaces, which were coated with different hard alloy electrode materials via Electro Spark Deposition (ESD) method, have been characterized. The electrode materials were chosen among hard alloys such as TiCN(Ni), CrC-NiCr, WC(Co) and TiWC(Co). During the ESD experiments, the following pulse parameters in a group were used: pulse current amplitude, pulse duration, electrical charge of 100-200 A, 100 mu s, 1000 mC respectively. The surface roughness, thickness of coatings, cross sectional microstructure analysis, phase analysis, micro hardness and adhesion properties of the coated samples were characterized by profilometer, SEM (EDX), XRD, micro hardness tester and scratch adhesion tester respectively.