Investigation of the effects of different heat treatment parameters on the corrosion and mechanical properties of the AlSi10Mg alloy produced with direct metal laser sintering

Ozer, Gokhan; Tarakci, Gurkan; Yilmaz, MUSTAFA; Oter, Zafer; Surmen, Omer; Akca, Yasar; Coskun, Mert; Koc, Ebubekir

doi:10.1002/maco.201911171

Investigation of the effects of different heat treatment parameters on the corrosion and mechanical properties of the AlSi10Mg alloy produced with direct metal laser sintering

Ozer G., Tarakci G., Yilmaz M. S., Oter Z. C., Surmen O., Akca Y., ...Daha Fazla

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, cilt.71, sa.3, ss.365-373, 2020 (SCI-Expanded, Scopus)

Yayın Türü: Makale / Tam Makale
Cilt numarası: 71 Sayı: 3
Basım Tarihi: 2020
Doi Numarası: 10.1002/maco.201911171
Dergi Adı: MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
Sayfa Sayıları: ss.365-373
Anahtar Kelimeler: AlSi10Mg, direct metal laser sintering, electrical conductivity, intergranular corrosion, mechanical properties, MELTED ALSI10MG, MICROSTRUCTURE, PARTS, RESISTANCE, HARDNESS
Bursa Uludağ Üniversitesi Adresli: Hayır

Özet

In this study, AlSi10Mg samples produced by the direct metal laser sintering (DMLS) method were applied to heat treatment with different parameters (stress relief and T6). Heat-treated and as-built samples were subjected to intergranular corrosion test according to BS EN ISO 11846 standard. Hardness, tensile, electrical conductivity, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and weight loss tests were applied to the samples. The corrosion, electrical conductivity, and mechanical properties of the DMLS-AlSi10Mg material were investigated in detail depending on the heat-treatment parameters.