Doç. Dr. CELALETTİN YÜCE

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Numerical and experimental investigation of the effect of heat input on weld bead geometry and stresses in laser welding

TURAN M., YÜCE C., KARPAT F.

Materialpruefung/Materials Testing , cilt.66, sa.9, ss.1463-1474, 2024 (SCI-Expanded)

Effect of process parameters on the mechanical behavior of Ti6Al4V alloys fabricated by laser powder bed fusion method

Baskin N., YÜCE C.

Journal of Materials Research and Technology , cilt.30, ss.7006-7019, 2024 (SCI-Expanded)

Effects of tooth root cracks on vibration and dynamic transmission error responses of asymmetric gears: A comparative study

Kalay O. C., Dogan O., Yüce C., Karpat F.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , cilt.52, sa.5, ss.2569-2604, 2024 (SCI-Expanded)

Effects of process parameters on surface quality and mechanical performance of 316L stainless steel produced by selective laser melting

Şener B., Çavuşoğlu O., Yüce C.

OPTIK , cilt.287, sa.171050, ss.1-11, 2023 (SCI-Expanded)

Multi-response optimization for laser transmission welding of PMMA to ABS using Taguchi-based TOPSIS method

Kucukoglu A., YÜCE C., Sozer I. E., KARPAT F.

Advances in Mechanical Engineering , cilt.15, sa.8, 2023 (SCI-Expanded)

Mechanical characterization and microstructure of fiber laser welded TWIP980 steel depending on welding speed and focal distance

Çavuşoğlu O., Yuce C., Aydın H.

OPTIK , cilt.274, ss.1-9, 2023 (SCI-Expanded)

Multi-Objective Optimization of Fiber Laser Cutting of Stainless-Steel Plates Using Taguchi-Based Grey Relational Analysis

TÜRKKAN Y. A., Aslan M., Tarkan A., Aslan Ö., YÜCE C., YAVUZ N.

Metals , cilt.13, sa.1, 2023 (SCI-Expanded)

Fatigue performances of helicopter gears

Kalay O. C., Yuce C., Doğan O., Yılmaz T. G., Karpat E., Kopmaz O., et al.

MATERIALS TESTING , cilt.65, sa.1, ss.52-62, 2023 (SCI-Expanded)

Effects of asymmetric tooth profile on single-tooth stiffness of polymer gears

Yuce C., Dogan O., KARPAT F.

MATERIALS TESTING , cilt.64, sa.4, ss.513-523, 2022 (SCI-Expanded)

A Comparative 3D Finite Element Computational Study of Stress Distribution and Stress Transfer in Small-Diameter Conical Dental Implants

Kalay O. C., Karaman H., KARPAT F., Dogan O., YÜCE C., KARPAT E., et al.

TEHNICKI VJESNIK-TECHNICAL GAZETTE , cilt.28, sa.6, ss.2045-2054, 2021 (SCI-Expanded)

Effects of rim thickness and drive side pressure angle on gear tooth root stress and fatigue crack propagation life

Dogan O., Yuce C., KARPAT F.

ENGINEERING FAILURE ANALYSIS , cilt.122, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

A comparative experimental study on the impact strength of standard and asymmetric involute spur gears

Kalay O. C., Doğan O., YILMAZ T. G., Yüce C., KARPAT F.

MEASUREMENT , cilt.172, 2021 (SCI-Expanded)

Multi-objective optimisation for indentation rate, nugget diameter and tensile load in resistance spot welding using Taguchi-based grey relational analysis

Yuce C.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.63, sa.4, ss.321-338, 2021 (SCI-Expanded)

Experimental measurement and numerical validation of single tooth stiffness for involute spur gears

KARPAT F., Yuce C., Dugan O.

MEASUREMENT , cilt.150, 2020 (SCI-Expanded)

Investigations on the microstructure and mechanical properties of laser welded dissimilar galvanized steel-aluminum joints

Yuce C., KARPAT F., YAVUZ N.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.104, sa.5-8, ss.2693-2704, 2019 (SCI-Expanded)

Design and development of tractor clutch using combined field and bench tests

KARPAT F., Yuce C., DOĞAN O., Genc M. O., KAYA N.

TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING , cilt.42, sa.2, ss.136-146, 2018 (SCI-Expanded)

An improved numerical method for the mesh stiffness calculation of spur gears with asymmetric teeth on dynamic load analysis

KARPAT F., DOĞAN O., Yuce C., Ekwaro-Osire S.

ADVANCES IN MECHANICAL ENGINEERING , cilt.9, sa.8, 2017 (SCI-Expanded)

The Effect of Process Parameters on the Microstructure and Mechanical Performance of Fiber Laser-Welded AA5182 Aluminium Alloys

Yuce C., Tutar M., KARPAT F., YAVUZ N., Tekin G.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.63, sa.9, ss.510-518, 2017 (SCI-Expanded)

The Optimization of Process Parameters and Microstructural Characterization of Fiber Laser Welded Dissimilar HSLA and MART Steel Joints

Yuce C., Tutar M., KARPAT F., YAVUZ N.

METALS , cilt.6, sa.10, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

A novel design procedure for tractor clutch fingers by using optimization and response surface methods

DOĞAN O., KARPAT F., Yuce C., KAYA N., YAVUZ N., Sen H.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.30, sa.6, ss.2615-2625, 2016 (SCI-Expanded)

The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a Taguchi orthogonal array

Tutar M., AYDIN H., Yuce C., YAVUZ N., BAYRAM A.

MATERIALS & DESIGN , cilt.63, ss.789-797, 2014 (SCI-Expanded)

A Case Study: Designing for Sustainability and Reliability in an Automotive Seat Structure

Yuce C., KARPAT F., YAVUZ N., Sendeniz G.

SUSTAINABILITY , cilt.6, sa.7, ss.4608-4631, 2014 (SCI-Expanded) Sürdürülebilir Kalkınma

Effect of Rotational Speed and Dwell Time on Mechanical Properties of Dissimilar AA1050-AA3105 Friction Stir Spot Welded Joints

AYDIN H., Tuncel O., Yuce C., Tutar M., YAVUZ N., BAYRAM A.

MATERIALS TESTING , cilt.56, sa.10, ss.818-825, 2014 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

M3 Sınıfı Bir Elektrikli Otobüsün Farklı Senaryolar Altında Sonlu Elemanlar Analizleri ile Hafifletilmesi

ÖZCAN A., Yuce C.

Çukurova Üniversitesi Mühendislik Fakültesi dergisi , cilt.39, sa.1, ss.9-22, 2024 (Hakemli Dergi)

Ağır Ticari Araç Süspansiyon Sistemleri için Modüler Taşıyıcı Kol Mekanizmasının Tasarımı ve Analizi

ALTINEL K., YILDIZ A., Yuce C.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.11, sa.3, ss.794-803, 2023 (Hakemli Dergi)

Prognostics and Health Management of Wind Energy Infrastructure Systems

Yuce C., Gecgel O., Dogan O., Dabetwar S., Yanik Y., Kalay O. C., et al.

ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg , cilt.8, 2022 (ESCI) Sürdürülebilir Kalkınma

PMMA ve ABS MALZEMELERİN LAZER İLETİM KAYNAĞI İLE BİRLEŞTİRİLMESİNDE PROSES PARAMETRE ETKİLERİNİN İNCELENMESİ

KÜÇÜKOĞLU A., YÜCE C., KARPAT F., Okar H., Sözer İ. E., Kurt N.

Uludağ University Journal of The Faculty of Engineering , cilt.26, sa.2, ss.481-491, 2021 (Hakemli Dergi)

Paslanmaz Çelik Malzemelerin Fiber Lazer ile Kesiminde Proses Parametrelerinin Optimizasyonu

YÜCE C.

Uludağ University Journal of The Faculty of Engineering , sa.2, ss.685-696, 2019 (Hakemli Dergi)

Shape Optimization of an Overdesinged Chain Link by using Desing of Experiment and Grapical Optimization

KARPAT F., DOĞAN O., YÜCE C.

International Journal of Mechanical And Production Engineering , cilt.5, sa.10, ss.106-110, 2017 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Fault Diagnosis With Deep Learning for Standard and Asymmetric Involute Spur Gears

KARPAT F., DİRİK A. E., KALAY O. C., YÜCE C., DOĞAN O., KORCUKLU B.

ASME 2021 International Mechanical Engineering Congress and Exposition, Amerika Birleşik Devletleri, 01 Kasım 2021, cilt.1314029

Yüksek Basınçlı Döküm Yöntemi ile Üretilen Silafont-36 Parçalarının Isıl İşlem Performanslarının İncelenmesi

Kara B., Zeybek A., YÜCE C.

10th International Automotive Technologies Congress, OTEKON 2020, Bursa, Türkiye, 6 - 07 Eylül 2021, ss.1613-1618

Şehirlerarası Yolcu Otobüsleri için Döner Mekanizmaya Sahip Hostes Koltuğu Geliştirilmesi

Aktürk G., Sezgin E., YÜCE C.

10th International Automotive Technologies Congress, OTEKON 2020, Bursa, Türkiye, 6 - 07 Eylül 2021, ss.1397-1404

Ses Sinyalleri Kullanılarak Talaşlı İmalat Prosesinde Takım Durumunun İzlenmesi

KALKANLI E., YÜCE C.

2. Uluslararası Mühendislik Bilimleri ve Multidisipliner Yaklaşımlar Kongresi, İstanbul, Türkiye, 18 Eylül 2021, ss.263-269

Bal Peteği Hücresel Yapılı Sandviç Panellerin Mekanik Özelliklerinin Sonlu Elemanlar Yöntemi ile İncelenmesi

YÜCE C.

IES’20 International Engineering Symposium | Engineering Applications in Industry (Virtual), İzmir, Türkiye, 5 - 06 Aralık 2020, ss.84-90

The Effect of Laser Beam Wobbling Mode on Weld Bead Geometry of Tailor Welded Blanks

YÜCE C.

8th International Symposium on Innovative Technologies in Engineering and Science, Bursa, Türkiye, 23 - 25 Ekim 2020, cilt.3, ss.282-290

Mechanical and Microstructural Properties of ColdMetal Transfer (CMT) Welded 6082-T6 Aluminum Alloys

YÜCE C., Kara B., Tekin G., Çapar N., Şengül D.

9th International Conference on Advanced Technologies (ICAT2020), İstanbul, Türkiye, 10 - 12 Ağustos 2020, ss.174-177

Topology Optimisation of a Passenger Seat Pillar

YÜCE C., Öncel C., Sezgin E.

3rd International Conference on Data Science and Applications (ICONDATA’20), İstanbul, Türkiye, 25 - 28 Haziran 2020, ss.251-257

Alüminyum Ekstrüzyon Alaşımlarının Soğuk Metal Transfer Ark Kaynağında Proses Parametre Etkilerinin İncelenmesi

YÜCE C., Tekin G., Kara B., Şengül D.

3. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC'20), Türkiye, 24 - 26 Haziran 2020, ss.294-298

INFLUENCE OF HEAT INPUT ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF LASER WELDED DISSIMILAR GALVANIZED STEEL-ALUMINUM JOINTS

Yuce C., KARPAT F., YAVUZ N.

13th ASME International Manufacturing Science and Engineering Conference, Texas, Amerika Birleşik Devletleri, 18 - 22 Haziran 2018

IMPROVEMENT OF LOADING CAPACITY OF INTERNAL SPUR GEAR WITH USING ASYMMETRIC TROCHOID PROFILE

YILMAZ T. G., DOĞAN O., Yuce C., KARPAT F.

ASME International Mechanical Engineering Congress and Exposition, Tama, Japonya, 3 - 09 Kasım 2017

DESIGN AND ANALYSIS OF INTERNAL GEARS WITH DIFFERENT RIM THICKNESS AND SHAPES

KARPAT F., Ekwaro-Osire S., YILMAZ T. G., Dogan O., Yuce C.

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015

OPTIMUM DESIGN OF TRACTOR CLUTCH PTO FINGER BY USING TOPOLOGY AND SHAPE OPTIMIZATION

Dogan O., KARPAT F., KAYA N., Yuce C., Genc M. O., Yavuz N.

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015

A Review on advanced joining techniques of multi material part manufacturing for automotive industry

YÜCE C., KARPAT F., YAVUZ N., DOĞAN O.

Proceedings of Eighteenth TheIIER International Conference, ROMA, İtalya, 28 - 29 Mart 2015, ss.51-56

EFFECTS OF RIM THICKNESS ON TOOTH ROOT STRESS AND MESH STIFFNESS OF INTERNAL GEARS

KARPAT F., Engin B., Dogan O., Yuce C., YILMAZ T. G.

ASME International Mechanical Engineering Congress and Exposition (IMECE), Montreal, Kanada, 14 - 20 Kasım 2014

THE INVESTIGATION OF STRESS DISTRIBUTION ON THE TRACTOR CLUTCH FINGER MECHANISM BY USING FINITE ELEMENT METHOD

KARPAT F., Dogan O., Yuce C., KAYA N., Cengiz G.

ASME International Mechanical Engineering Congress and Exposition (IMECE2014), Montreal, Kanada, 14 - 20 Kasım 2014 Sürdürülebilir Kalkınma

A NOVEL METHOD FOR CALCULATION GEAR TOOTH STIFFNESS FOR DYNAMIC ANALYSIS OF SPUR GEARS WITH ASYMMETRIC TEETH

KARPAT F., Dogan O., Ekwaro-Osire S., Yuce C.

ASME International Mechanical Engineering Congress and Exposition (IMECE), Montreal, Kanada, 14 - 20 Kasım 2014

Influence of welding parameters on mechanical properties and microstructure of friction stir spot welded AA5754 Aluminium alloys

TUTAR M., AYDIN H., YÜCE C., TUNÇEL O., YAVUZ N., BAYRAM A.

15. International Materials Syposium, Denizli, Türkiye, 15 Ekim 2014

Effect of rotational speed and dwell time on mechanical properties of dissimilar AA1050-AA3105 joints produced by friction stir spot welding

AYDIN H., TUNÇEL O., YÜCE C., TUTAR M., YAVUZ N., BAYRAM A.

3. International Conference on Welding Technologies and Exhibition (ICWET 2014), Manisa, Türkiye, 21 Mayıs 2014

PROTOTYPING A NEW LIGHTWEIGHT PASSENGER SEAT

Yuce C., KARPAT F., Yavuz N., Kaynakli Ö., Dolaylar E., Sendeniz G.

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013

A VIRTUAL TOOL FOR WEAR SIMULATION OF PLASTIC GEAR PAIRS

Karpat F., Ekwaro-Osire S., Yuce C., Karpat F.

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013

Metrikler

Yayın

Atıf (WoS)

305

H-İndeks (WoS)

Atıf (Scopus)

370

H-İndeks (Scopus)

Atıf (Scholar)

455

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Proje

Tez Danışmanlığı

Açık Erişim