Yayınlar & Eserler

Yayın Ağı
Makaleler 29
Tümü (29)
SCI-E, SSCI, AHCI (29)
SCI-E, SSCI, AHCI, ESCI (29)
Scopus (29)

1. Prevention of the Fracture Problem Occurring in Automotive Alternator Heatsink Blocks Using Artificial Intelligence

Kökden D., Egi A., Bulut E., Albak E. İ., Korkmaz İ., Öztürk F.
APPLIED SCIENCES-BASEL , cilt.14, sa.24, 2024 (SCI-Expanded) identifier identifier

2. Predictions of the design decisions for vehicle alloy wheel rims using neural network

Topaloglu A., KAYA N., Ozturk F.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , cilt.237, sa.12, ss.2913-2927, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

3. Prediction of Self-Loosening Mechanism and Behavior of Bolted Joints on Automotive Chassis Using Artificial Intelligence

Güler B., Şengör Ö., Yavuz O., ÖZTÜRK F.
Machines , cilt.11, sa.9, 2023 (SCI-Expanded) Creative Commons License identifier identifier

4. Determination of the Fleet Size of AGVs with AGV Pools Using a Genetic Algorithm and Artificial Intelligence

Şenaras O. M., Solmaz E., Öztürk N., Öztürk F.
Applied Sciences (Switzerland) , cilt.13, sa.13, 2023 (SCI-Expanded, Scopus) identifier identifier

5. Correlation between objective and subjective tests for vehicle ride comfort evaluations

Boke T. A., Albak E. İ., Kaya N., Bozkurt R., Ergul M., Ozturk D., et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , cilt.237, sa.4, ss.706-721, 2023 (SCI-Expanded, Scopus) identifier identifier

6. A Comparative Study on Conventional and Hybrid Quenching Hot Forming Methods of 22MnB5 Steel for Mechanical Properties and Microstructure

Esiyok F., ERTAN R., SEVİLGEN G., BULUT E., Ozturk F., Alyay I., et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.32, sa.3, ss.1347-1356, 2023 (SCI-Expanded) identifier identifier

7. Kinematics & Compliance Validation of a Vehicle Suspension and Steering Kinematics Optimization Using Neural Networks

Ağakişi G., ÖZTÜRK F.
Mechanika , cilt.29, sa.3, ss.243-251, 2023 (SCI-Expanded) Creative Commons License identifier identifier

8. Smart cooling design using dual loop cooling to increase engine efficiency and decrease fuel emissions with artificial intelligence

Kula S., BULUT E., Altay E., Sumer O., Ozturk F.
CASE STUDIES IN THERMAL ENGINEERING , cilt.40, 2022 (SCI-Expanded) identifier identifier

9. Estimation of Energy Management Strategy Using Neural-Network-Based Surrogate Model for Range Extended Vehicle

Türker E., Bulut E., Kahraman A., Çakıcı M., Öztürk F.
APPLIED SCIENCES-BASEL , cilt.12, sa.24, 2022 (SCI-Expanded) identifier identifier

10. Prediction and optimization of the design decisions of liquid cooling systems of battery modules using artificial neural networks

Bulut E., Albak E. İ., Sevilgen G., Öztürk F.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH , cilt.46, sa.6, ss.7293-7308, 2022 (SCI-Expanded, Scopus) identifier identifier

11. Prediction and Optimization of the Design and Process Parameters of a Hybrid DED Product Using Artificial Intelligence

Calli M., Albak E. İ., Öztürk F.
APPLIED SCIENCES-BASEL , cilt.12, sa.10, 2022 (SCI-Expanded, Scopus) identifier identifier

12. MULTI-OBJECTIVE OPTIMIZATION OF LIQUID COOLING SYSTEM FOR A TWELVE-CELL BATTERY MODULE

Bulut E., Albak E. İ., Sevilgen G., Öztürk F.
HEAT TRANSFER RESEARCH , cilt.53, sa.4, ss.15-32, 2022 (SCI-Expanded, Scopus) identifier identifier

13. Effects of material failure criteria on design of vehicle parts under impact loading

ÖZTÜRK İ., KAYA N., ÖZTÜRK F.
INTERNATIONAL JOURNAL OF CRASHWORTHINESS , cilt.27, sa.1, ss.80-91, 2022 (SCI-Expanded) identifier identifier

14. A new approach for battery thermal management system design based on Grey Relational Analysis and Latin Hypercube Sampling

Bulut E., Albak E. İ., Sevilgen G., Öztürk F.
CASE STUDIES IN THERMAL ENGINEERING , cilt.28, 2021 (SCI-Expanded, Scopus) identifier identifier

15. Rubber bushing optimization by using a novel chaotic krill herd optimization algorithm

Bilal H., ÖZTÜRK F.
SOFT COMPUTING , cilt.25, sa.22, ss.14333-14355, 2021 (SCI-Expanded) identifier identifier

16. Optimal design of differential mount using nature-inspired optimization methods

Albak E. İ., Solmaz E., Öztürk F.
MATERIALS TESTING , cilt.63, sa.8, ss.764-769, 2021 (SCI-Expanded) identifier identifier

17. Three dimensional numerical analysis of heat transfer during spray quenching of 22MnB5 steel with a single nozzle

BULUT E., SEVİLGEN G., Esiyok F., ÖZTÜRK F., Abi T. T.
HEAT AND MASS TRANSFER , cilt.57, sa.6, ss.961-974, 2021 (SCI-Expanded) identifier identifier

18. Multiobjective crashworthiness optimization of graphene type multi-cell tubes under various loading conditions

Albak E. İ., Solmaz E., Yıldız A. R., Öztürk F.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.43, sa.5, 2021 (SCI-Expanded, Scopus) identifier identifier

19. Simplified optimization model and analysis of twist beam rear suspension system

Albak E. İ., Solmaz E., Öztürk F.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , cilt.235, sa.5, ss.1434-1445, 2021 (SCI-Expanded, Scopus) identifier identifier

20. THE INVESTIGATION OF THE EFFECTS OF SPRAY PARAMETERS ON THE THERMAL AND MECHANICAL PROPERTIES OF 22MnB5 STEEL DURING HYBRID QUENCHING PROCESS

Sevilgen G., Ertan R., Bulut E., Öztürk F., Esiyok F., Abi T. T., et al.
HEAT TRANSFER RESEARCH , cilt.52, sa.14, 2021 (SCI-Expanded) identifier identifier

21. Enhancing a twist beam suspension system conceptual design using population-based optimization methods

Albak E. İ., Solmaz E., Öztürk F.
MATERIALS TESTING , cilt.62, sa.7, ss.672-677, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

22. Impact attenuator conceptual design using lightweight materials and meta-modeling technique

Albak E. İ., Solmaz E., Kaya N., Öztürk F.
MATERIALS TESTING , cilt.61, sa.7, ss.621-626, 2019 (SCI-Expanded, Scopus) identifier identifier

23. Design of vehicle parts under impact loading using a multi-objective design approach

Ozturk I., KAYA N., ÖZTÜRK F.
MATERIALS TESTING , cilt.60, sa.5, ss.501-509, 2018 (SCI-Expanded) identifier identifier

24. Integrated model-based approach for the optimisation of vehicle ride comfort and handling characteristics: integrated vehicle dynamics model design

Pir F., Albak E. İ., Öztürk F., Kaya N., Korkmaz I.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.71, ss.154-173, 2016 (SCI-Expanded, Scopus) identifier identifier

25. Hot stamping applications in the automotive industry: coupled numerical simulation and FE-based die design

Esiyok F., Sevilgen G., Öztürk F., Kaya N., Karen I.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.71, ss.139-153, 2016 (SCI-Expanded) identifier identifier

26. Design of improved energy absorbing pads to reduce occupant injuries in vehicle side impact

Yildizhan M., Efendioglu B., Kaya N., Ozturk I., Albak E. İ., Öztürk F.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.71, ss.174-190, 2016 (SCI-Expanded, Scopus) identifier identifier

27. Intelligent die design optimization using enhanced differential evolution and response surface methodology

Karen I., KAYA N., Ozturk F.
JOURNAL OF INTELLIGENT MANUFACTURING , cilt.26, sa.5, ss.1027-1038, 2015 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

28. A design tool to evaluate the vehicle ride comfort characteristics: modeling, physical testing, and analysis

Karen I., KAYA N., Ozturk F., Korkmaz I., Yildizhan M., Yurttas A.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.60, ss.755-763, 2012 (SCI-Expanded) identifier identifier

29. Shape- and Topology-Based Structural Die Design Using Differential Evolution and Response Surface Methodology for Sheet Metal Forming

Karen I., KAYA N., ÖZTÜRK F.
MATERIALS TESTING , cilt.54, sa.2, ss.92-102, 2012 (SCI-Expanded) identifier identifier