Assoc. Prof. CELALETTİN YÜCE

Journal articles indexed in SCI, SSCI, and AHCI

Effect of process parameters on mechanical properties of 5554 aluminum alloy fabricated by wire arc additive manufacturing

Sabanci O., Hacibekir C., Kechagia O., Tekelioglu O., YÜCE C.

MATERIALS TESTING , no.5, pp.787-796, 2025 (SCI-Expanded)

Numerical and experimental investigation of the effect of heat input on weld bead geometry and stresses in laser welding

TURAN M., YÜCE C., KARPAT F.

Materialpruefung/Materials Testing , vol.66, no.9, pp.1463-1474, 2024 (SCI-Expanded)

Effect of process parameters on the mechanical behavior of Ti6Al4V alloys fabricated by laser powder bed fusion method

Baskin N., Yüce C.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , vol.30, pp.7006-7019, 2024 (SCI-Expanded) Sustainable Development

Effects of tooth root cracks on vibration and dynamic transmission error responses of asymmetric gears: A comparative study

Kalay O. C., Dogan O., Yüce C., Karpat F.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , vol.52, no.5, pp.2569-2604, 2024 (SCI-Expanded)

Effects of process parameters on surface quality and mechanical performance of 316L stainless steel produced by selective laser melting

Şener B., Çavuşoğlu O., Yüce C.

OPTIK , vol.287, no.171050, pp.1-11, 2023 (SCI-Expanded)

Multi-response optimization for laser transmission welding of PMMA to ABS using Taguchi-based TOPSIS method

Kucukoglu A., YÜCE C., Sozer I. E., KARPAT F.

Advances in Mechanical Engineering , vol.15, no.8, 2023 (SCI-Expanded)

Mechanical characterization and microstructure of fiber laser welded TWIP980 steel depending on welding speed and focal distance

Çavuşoğlu O., Yuce C., Aydın H.

OPTIK , vol.274, pp.1-9, 2023 (SCI-Expanded)

Multi-Objective Optimization of Fiber Laser Cutting of Stainless-Steel Plates Using Taguchi-Based Grey Relational Analysis

TÜRKKAN Y. A., Aslan M., Tarkan A., Aslan Ö., YÜCE C., YAVUZ N.

Metals , vol.13, no.1, 2023 (SCI-Expanded)

Fatigue performances of helicopter gears

Kalay O. C., Yuce C., Doğan O., Yılmaz T. G., Karpat E., Kopmaz O., et al.

MATERIALS TESTING , vol.65, no.1, pp.52-62, 2023 (SCI-Expanded)

Effects of asymmetric tooth profile on single-tooth stiffness of polymer gears

Yuce C., Dogan O., KARPAT F.

MATERIALS TESTING , vol.64, no.4, pp.513-523, 2022 (SCI-Expanded)

A Comparative 3D Finite Element Computational Study of Stress Distribution and Stress Transfer in Small-Diameter Conical Dental Implants

Kalay O. C., Karaman H., KARPAT F., Dogan O., YÜCE C., KARPAT E., et al.

TEHNICKI VJESNIK-TECHNICAL GAZETTE , vol.28, no.6, pp.2045-2054, 2021 (SCI-Expanded)

Effects of rim thickness and drive side pressure angle on gear tooth root stress and fatigue crack propagation life

Dogan O., Yuce C., KARPAT F.

ENGINEERING FAILURE ANALYSIS , vol.122, 2021 (SCI-Expanded) Sustainable Development

A comparative experimental study on the impact strength of standard and asymmetric involute spur gears

Kalay O. C., Doğan O., YILMAZ T. G., Yüce C., KARPAT F.

MEASUREMENT , vol.172, 2021 (SCI-Expanded)

Multi-objective optimisation for indentation rate, nugget diameter and tensile load in resistance spot welding using Taguchi-based grey relational analysis

Yuce C.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , vol.63, no.4, pp.321-338, 2021 (SCI-Expanded)

Experimental measurement and numerical validation of single tooth stiffness for involute spur gears

KARPAT F., Yuce C., Dugan O.

MEASUREMENT , vol.150, 2020 (SCI-Expanded)

Investigations on the microstructure and mechanical properties of laser welded dissimilar galvanized steel-aluminum joints

Yuce C., KARPAT F., YAVUZ N.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.104, no.5-8, pp.2693-2704, 2019 (SCI-Expanded)

Design and development of tractor clutch using combined field and bench tests

KARPAT F., Yuce C., DOĞAN O., Genc M. O., KAYA N.

TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING , vol.42, no.2, pp.136-146, 2018 (SCI-Expanded)

An improved numerical method for the mesh stiffness calculation of spur gears with asymmetric teeth on dynamic load analysis

KARPAT F., DOĞAN O., Yuce C., Ekwaro-Osire S.

ADVANCES IN MECHANICAL ENGINEERING , vol.9, no.8, 2017 (SCI-Expanded)

The Effect of Process Parameters on the Microstructure and Mechanical Performance of Fiber Laser-Welded AA5182 Aluminium Alloys

Yuce C., Tutar M., KARPAT F., YAVUZ N., Tekin G.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , vol.63, no.9, pp.510-518, 2017 (SCI-Expanded)

The Optimization of Process Parameters and Microstructural Characterization of Fiber Laser Welded Dissimilar HSLA and MART Steel Joints

Yuce C., Tutar M., KARPAT F., YAVUZ N.

METALS , vol.6, no.10, 2016 (SCI-Expanded) Sustainable Development

A novel design procedure for tractor clutch fingers by using optimization and response surface methods

DOĞAN O., KARPAT F., Yuce C., KAYA N., YAVUZ N., Sen H.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , vol.30, no.6, pp.2615-2625, 2016 (SCI-Expanded)

The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a Taguchi orthogonal array

Tutar M., AYDIN H., Yuce C., YAVUZ N., BAYRAM A.

MATERIALS & DESIGN , vol.63, pp.789-797, 2014 (SCI-Expanded)

A Case Study: Designing for Sustainability and Reliability in an Automotive Seat Structure

Yuce C., KARPAT F., YAVUZ N., Sendeniz G.

SUSTAINABILITY , vol.6, no.7, pp.4608-4631, 2014 (SCI-Expanded) Sustainable Development

Effect of Rotational Speed and Dwell Time on Mechanical Properties of Dissimilar AA1050-AA3105 Friction Stir Spot Welded Joints

AYDIN H., Tuncel O., Yuce C., Tutar M., YAVUZ N., BAYRAM A.

MATERIALS TESTING , vol.56, no.10, pp.818-825, 2014 (SCI-Expanded)

Articles Published in Other Journals

A Novel Method for Tooth Bending Stress Calculation of Gears with Asymmetric Teeth

Doğan O., Yuce C., Karpat F.

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) , vol.7, no.5, pp.2139-2157, 2024 (Peer-Reviewed Journal)

Lightweighting of an M3 Class Electric Bus Under Different Scenarios with Finite Element Analysis

ÖZCAN A., Yuce C.

Çukurova Üniversitesi Mühendislik Fakültesi dergisi , vol.39, no.1, pp.9-22, 2024 (Peer-Reviewed Journal)

Design and Analysis of Modular Support Arm Mechanism for Heavy Commercial Vehicle Suspension Systems

ALTINEL K., YILDIZ A., Yuce C.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , vol.11, no.3, pp.794-803, 2023 (Peer-Reviewed Journal)

Prognostics and Health Management of Wind Energy Infrastructure Systems

Yuce C., Gecgel O., Dogan O., Dabetwar S., Yanik Y., Kalay O. C., et al.

ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg , vol.8, 2022 (ESCI) Sustainable Development

PMMA ve ABS MALZEMELERİN LAZER İLETİM KAYNAĞI İLE BİRLEŞTİRİLMESİNDE PROSES PARAMETRE ETKİLERİNİN İNCELENMESİ

KÜÇÜKOĞLU A., YÜCE C., KARPAT F., Okar H., Sözer İ. E., Kurt N.

Uludağ University Journal of The Faculty of Engineering , vol.26, no.2, pp.481-491, 2021 (Peer-Reviewed Journal)

Paslanmaz Çelik Malzemelerin Fiber Lazer ile Kesiminde Proses Parametrelerinin Optimizasyonu

YÜCE C.

Uludağ University Journal of The Faculty of Engineering , no.2, pp.685-696, 2019 (Peer-Reviewed Journal)

Shape Optimization of an Overdesinged Chain Link by using Desing of Experiment and Grapical Optimization

KARPAT F., DOĞAN O., YÜCE C.

International Journal of Mechanical And Production Engineering , vol.5, no.10, pp.106-110, 2017 (Peer-Reviewed Journal)

AN ALTERNATIVE METHOD TO SPECIFY UNDERCUT POINT OF INVOLUTE SPUR GEAR WITH LOW NUMBER TEETH

Yılmaz T. G., Yüce C., Karpat F.

International Journal of Mechanical and Production Engineering , vol.9, no.5, pp.96-99, 2017 (Peer-Reviewed Journal)

The Optimization of Process Parameters for Laser Welded Galvanized Automobile Steel Sheets Using A Taguchi Method

Yüce C., Karpat F., Yavuz N., Tekin G., Çapar N.

International Journal of Mechanical And Production Engineering , vol.5, no.9, pp.83-87, 2017 (Peer-Reviewed Journal)

Design Verification of Tractor Clutch Cover under High Centrifugal Effect

Karpat F., Doğan O., Yüce C., Genç M. O.

International Journal of Automotive Science and Tecnology , vol.1, no.1, pp.29-33, 2017 (Peer-Reviewed Journal)

Design Optimization Of Aluminum Hinge Parts For Lightweight Vehicles Performance Durability And Manufacturability

Tüfekçi M., Karpat F., Yüce C., Doğan O., Yılmaz T. G., Kaya N.

International Journal of Mechanical and Production Engineering , vol.3, no.12, pp.11-18, 2015 (Peer-Reviewed Journal)

A Review On Advanced Joining Techniques Of Multi Material Part Manufacturing For Automotive Industry

Yüce C., Karpat F., Yavuz N.

International Journal of Mechanical and Production Engineering , vol.3, no.5, pp.63-68, 2015 (Peer-Reviewed Journal)

A study on determination of optimum thermal insulation thickness using life cycle cost analysis

KAYNAKLI Ö., YÜCE C., DOĞAN O., Zeynep K.

International Journal of Advances in Mechanical and Civil Engineering , vol.3, no.6, pp.1-5, 2015 (Peer-Reviewed Journal)

Papers Presented at Peer-Reviewed Scientific Conferences

COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF PRESSURE DISTRIBUTION AND FLOW DYNAMICS IN A ROTARY JOINT UNIT

YÜCE B. E., Oğuz O., Akbıyık F., Mermer T., YÜCE C., KARPAT F.

ICAME 2024, İstanbul, Turkey, 24 - 26 December 2024, (Full Text)

Hostes Koltuklarında Kullanılan Yan Sac Parçanın Topoloji Optimizasyonu

Can S., Şen S. N., Öztürk V., YÜCE C.

14. Uluslararası Mühendislik, Mimarlık ve Tasarım Kongresi, Turkey, 28 - 29 December 2024, pp.839-846

Examination of Foldable Seats with Different Designs for City Buses

Akçaay K., Sayan Z., Öztürk V., YÜCE C.

III. International Canakkale Scientific Studies Conference, Çanakkale, Turkey, 29 August 2024, pp.144-150, (Full Text)

Seçici Lazer Ergitme Yönteminde Enerji Yoğunluğunun Etkisinin İncelenmesi

Baskın N., Yılmazoğlu A. G., Üzel U., Sağlam H., YÜCE C.

International Conference on Recent Academic Studies (ICRAS 2023), Turkey, 19 November 2023

AISI304 Paslanmaz Çeliklerin Lazer Kesiminde Proses Parametrelerinin Yüzey Pürüzlülüğüne Etkisi

Aslan M., Tarkan A., Aslan Ö., YÜCE C., YAVUZ N.

1st International Conference on Scientific and Academic Research (ICSAR 2022), Konya, Turkey, 10 December 2022, pp.446-449, (Full Text)

Seçiçi Lazer Ergitme Yöntemi İle Üretilen Katmanlı Yapıların Mekanik Özelliklerinin İncelenmesi

Şener B., YÜCE C.

4. Uluslararası Mühendislik Bilimleri Ve Multidisipliner Yaklaşımlar Kongresi, İstanbul, Turkey, 03 November 2022, pp.113-116

Fault Diagnosis With Deep Learning for Standard and Asymmetric Involute Spur Gears

KARPAT F., DİRİK A. E., KALAY O. C., YÜCE C., DOĞAN O., KORCUKLU B.

ASME 2021 International Mechanical Engineering Congress and Exposition, United States Of America, 01 November 2021, vol.1314029, (Full Text)

Yüksek Basınçlı Döküm Yöntemi ile Üretilen Silafont-36 Parçalarının Isıl İşlem Performanslarının İncelenmesi

Kara B., Zeybek A., YÜCE C.

10th International Automotive Technologies Congress, OTEKON 2020, Bursa, Turkey, 6 - 07 September 2021, pp.1613-1618, (Full Text)

Şehirlerarası Yolcu Otobüsleri için Döner Mekanizmaya Sahip Hostes Koltuğu Geliştirilmesi

Aktürk G., Sezgin E., YÜCE C.

10th International Automotive Technologies Congress, OTEKON 2020, Bursa, Turkey, 6 - 07 September 2021, pp.1397-1404

Ses Sinyalleri Kullanılarak Talaşlı İmalat Prosesinde Takım Durumunun İzlenmesi

KALKANLI E., YÜCE C.

2. Uluslararası Mühendislik Bilimleri ve Multidisipliner Yaklaşımlar Kongresi, İstanbul, Turkey, 18 September 2021, pp.263-269

Convolutional neural networks based rolling bearing fault classification under variable operating conditions

KARPAT F., Kalay O. C., DİRİK A. E., Dogan O., KORCUKLU B., Yuce C.

2021 International Conference on INnovations in Intelligent SysTems and Applications, INISTA 2021, Kocaeli, Turkey, 25 - 27 August 2021, (Full Text) Sustainable Development

Bal Peteği Hücresel Yapılı Sandviç Panellerin Mekanik Özelliklerinin Sonlu Elemanlar Yöntemi ile İncelenmesi

YÜCE C.

IES’20 International Engineering Symposium | Engineering Applications in Industry (Virtual), İzmir, Turkey, 5 - 06 December 2020, pp.84-90

A Novel AI-Based Method for Spur Gear Early Fault Diagnosis in Railway Gearboxes

KARPAT F., DİRİK A. E., Doğan O., Kalay O. C., KORCUKLU B., YÜCE C.

2020 Innovations in Intelligent Systems and Applications Conference (ASYU), Istanbul, Turkey, Turkey, 15 - 17 October 2020, pp.1-6, (Full Text)

The Effect of Laser Beam Wobbling Mode on Weld Bead Geometry of Tailor Welded Blanks

YÜCE C.

8th International Symposium on Innovative Technologies in Engineering and Science, Bursa, Turkey, 23 - 25 October 2020, vol.3, pp.282-290, (Full Text)

Mechanical and Microstructural Properties of ColdMetal Transfer (CMT) Welded 6082-T6 Aluminum Alloys

YÜCE C., Kara B., Tekin G., Çapar N., Şengül D.

9th International Conference on Advanced Technologies (ICAT2020), İstanbul, Turkey, 10 - 12 August 2020, pp.174-177, (Full Text)

Topology Optimisation of a Passenger Seat Pillar

YÜCE C., Öncel C., Sezgin E.

3rd International Conference on Data Science and Applications (ICONDATA’20), İstanbul, Turkey, 25 - 28 June 2020, pp.251-257, (Full Text)

Alüminyum Ekstrüzyon Alaşımlarının Soğuk Metal Transfer Ark Kaynağında Proses Parametre Etkilerinin İncelenmesi

YÜCE C., Tekin G., Kara B., Şengül D.

3. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC'20), Turkey, 24 - 26 June 2020, pp.294-298

EXPERIMENTAL INVESTIGATION OF THE IMPACT RESISTANCE OF INVOLUTE SPUR GEARS

Doğan O., Karpat F., Yüce C., Kalay O. C.

2018 The 9th International Conference on Mechanical and Aerospace Engineering (ICMAE’18), Budapest, Hungary, 10 - 13 July 2018, (Full Text)

INFLUENCE OF HEAT INPUT ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF LASER WELDED DISSIMILAR GALVANIZED STEEL-ALUMINUM JOINTS

Yuce C., KARPAT F., YAVUZ N.

13th ASME International Manufacturing Science and Engineering Conference, Texas, United States Of America, 18 - 22 June 2018

IMPROVEMENT OF LOADING CAPACITY OF INTERNAL SPUR GEAR WITH USING ASYMMETRIC TROCHOID PROFILE

YILMAZ T. G., DOĞAN O., Yuce C., KARPAT F.

ASME International Mechanical Engineering Congress and Exposition, Tama, Japan, 3 - 09 November 2017, (Full Text)

Prototype Conveyor Line Monitoring System

Yüce C., Yılmaz T. G., Karpat F., Yavuz N.

ISERD, 218th International Conference on Recent Innovations in Engineering and Technology (ICRIET), Florence, Italy, 21 - 22 July 2017, (Full Text)

An Alternative Method to Specify Undercut Point of Involute Spur Gear with Low Number Teeth

Yılmaz T. G., Yüce C., Karpat F.

ISERD, 218th International Conference on Recent Innovations in Engineering and Technology (ICRIET), Florence, Italy, 21 - 22 July 2017, (Full Text)

The Optimization of Process Parameters for Laser Welded Galvanized Automobile Steel Sheets Using A Taguchi Method

Yüce C., Karpat F., Yavuz N., Tekin G., Çapar N.

International Conference on Engineering,Technology and Innovations (IACETI), Paris, France, 13 - 14 July 2017, pp.52-56, (Full Text)

SHAPE OPTIMIZATION OF AN OVERDESINGED CHAIN LINK BY USING DESING OF EXPERIMENT AND GRAPICAL OPTIMIZATION

Karpat F., Doğan O., Yüce C.

Proceedings of Academics World 66th International Conference, Praha, Czech Republic, 21 - 22 May 2017, (Full Text)

Effect of fiber laser welding parameters on the penetration depth and weld bead geometry

Yüce C., Karpat F., Yavuz N., Tekin G., Çapan N.

1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Turkey, 26 - 28 October 2016, (Full Text)

DESIGN AND ANALYSIS OF INTERNAL GEARS WITH DIFFERENT RIM THICKNESS AND SHAPES

KARPAT F., Ekwaro-Osire S., YILMAZ T. G., Dogan O., Yuce C.

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, United States Of America, 13 - 19 November 2015, (Full Text)

OPTIMUM DESIGN OF TRACTOR CLUTCH PTO FINGER BY USING TOPOLOGY AND SHAPE OPTIMIZATION

Dogan O., KARPAT F., KAYA N., Yuce C., Genc M. O., Yavuz N.

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, United States Of America, 13 - 19 November 2015

Otomobil Kapı Menteşesinin Bilgisayar Destekli Tasarımı Analizi ve Doğrulanması

TÜFEKÇİ M., YILMAZ T. G., YÜCE C., DOĞAN O., KARPAT F.

XIII. Otomotiv ve Yan Sanayi Sempozyumu ve Sergisi, İstanbul, Turkey, 13 - 14 November 2015, pp.33-41, (Full Text)

Optimum Design of Tractor Clutch PTO Finger Using Topology and Shape Optimization

Doğan O., Karpat F., Kaya N., Yüce C., Yavuz N., Genç M. O.

ASME IMECE 2015, Texas, United States Of America, 13 - 19 November 2015, (Full Text)

Design Optimization of Aluminum Hinge Parts for Lightweight Vehicles Performance Durability and Manufacturability

TÜFEKÇİ M., KARPAT F., YÜCE C., DOĞAN O., YILMAZ T. G., KAYA N.

2015 IIER 19th International Conference on Recent Innovations in Engineering and Technology (ICRRIET2015), 23 October 2015, (Full Text)

A study on determination of optimum thermal insulation thickness using life cycle cost analysis

KAYNAKLI Ö., YÜCE C., DOĞAN O., Zeynep K.

19th International Conference on Recent Innovations in Engineering and Technology, New York, United States Of America, 23 - 25 October 2015, pp.14-18, (Full Text)