Doç. Dr. AHMET YILDIZ

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Development of a New Sound Quality Parameter for Road Noise Perception Inside Vehicle Cabinet

Ozkan A., Yildiz M., Yıldız A.

Applied Sciences (Switzerland) , cilt.14, sa.22, 2024 (SCI-Expanded)

Multi-Objective Optimization of Three-Stage Turbomachine Rotor Based on Complex Transfer Matrix Method

Niş H. T., YILDIZ A.

Applied Sciences (Switzerland) , cilt.14, sa.22, 2024 (SCI-Expanded)

Free vibration analyses of 3D printed plates with different geometric fillings: experimental testing and numerical simulations

YILDIZ A., Ibram E., Erol O., GÜLER ÖZGÜL H.

ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES , cilt.79, sa.10, ss.987-996, 2024 (SCI-Expanded)

Experimental testing and numerical simulations of 3D-printed PETG pins used for vehicle pedals

Koksal M. A., YILDIZ A.

Materialpruefung/Materials Testing , cilt.66, sa.7, ss.1084-1094, 2024 (SCI-Expanded)

Analysis of the vibration characteristics of a variable cross section rotor using the complex transfer matrix method and comparison with different methods Kompleks transfer matris yöntemi ile değişken kesitli bir rotorun titreşim karakteristiğinin analizi ve farklı yöntemlerin karşılaştırılması

Niş H. T., YILDIZ A.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.39, sa.3, ss.1649-1660, 2024 (SCI-Expanded)

Fuzzy logic and proportional integral derivative based multi-objective optimization of active suspension system of a 4×4 in-wheel motor driven electrical vehicle

Bingül Ö., Yıldız A.

JVC/Journal of Vibration and Control , cilt.29, sa.5-6, ss.1366-1386, 2023 (SCI-Expanded)

Optimal Design of a Five-Bar Planar Manipulator and Its Controller by Using Different Algorithms for Minimum Shaking Forces and Moments for the Largest Trajectory in a Usable Workspace

Kavala Sen D., Yıldız A., Kopmaz O.

Machines , cilt.10, sa.11, 2022 (SCI-Expanded)

Structural design optimization of the arc spring and dual-mass flywheel integrated with different optimization methods

YILDIZ A., Yilmaz O., Karabulut H.

MATERIALS TESTING , cilt.64, sa.2, ss.240-248, 2022 (SCI-Expanded)

A comparative study of energy consumption and recovery of autonomous fuel‐cell hydrogen–electric vehicles using different powertrains based on regenerative braking and electronic stability control system

YILDIZ A., ÖZEL M. A.

Applied Sciences (Switzerland) , cilt.11, sa.6, 2021 (SCI-Expanded)

Parametric synthesis of two different trunk lid mechanisms for sedan vehicles using population-based optimisation algorithms

Yildiz A., Uluda B.

MECHANISM AND MACHINE THEORY , cilt.156, 2021 (SCI-Expanded)

Characterization of the torsional vibration behavior of circular and rectangular cross-sectional arc springs: Theory and experiments

Fidanciogullari S., YILDIZ A.

MATERIALS TESTING , cilt.63, sa.2, ss.113-118, 2021 (SCI-Expanded)

A comparative study on the optimal non-linear seat and suspension design for an electric vehicle using different population-based optimisation algorithms

YILDIZ A.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.80, ss.241-256, 2019 (SCI-Expanded)

Experimental validation of the Carbone-Mangialardi-Mantriota model of continuously variable transmissions

Yildiz A., Bottiglione F., Piccininni A., KOPMAZ O., Carbone G.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , cilt.232, sa.6, ss.828-837, 2018 (SCI-Expanded)

Control-Oriented Modelling with Experimental Verification and Design of the Appropriate Gains of a PI Speed Ratio Controller of Chain CVTs

YILDIZ A., KOPMAZ O.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.63, sa.6, ss.374-382, 2017 (SCI-Expanded)

Modeling chain continuously variable transmission for direct implementation in transmission control

Yildiz A., Piccininni A., Bottiglione F., Carbone G.

MECHANISM AND MACHINE THEORY , cilt.105, ss.428-440, 2016 (SCI-Expanded)

Dynamic modeling and analysis of a four-bar mechanism coupled with a CVT for obtaining variable input speeds

YILDIZ A., KOPMAZ O., TELLİ ÇETİN S.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.29, sa.3, ss.1001-1006, 2015 (SCI-Expanded)

Dynamic analysis of a mechanical press equipped with a half-toroidal continuously variable transmission

Yildiz A., Kopmaz O.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.50, sa.1, ss.22-36, 2015 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Ağır Ticari Araç Süspansiyon Sistemleri için Modüler Taşıyıcı Kol Mekanizmasının Tasarımı ve Analizi

ALTINEL K., YILDIZ A., Yuce C.

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.11, sa.3, ss.794-803, 2023 (Hakemli Dergi)

FARKLI GÜÇ AKTARMA SİSTEMLERİNE SAHİP HİDROJEN ENERJİLİ ELEKTRİKLİ ARAÇLARIN ENERJİ TÜKETİMİ VE GERİ KAZANIMLARININ KARŞILAŞTIRILMASI

YILDIZ A., ÖZEL M. A., KOPMAZ O.

Uludağ University Journal of The Faculty of Engineering , cilt.24, sa.2, ss.91-102, 2019 (Hakemli Dergi) Sürdürülebilir Kalkınma

A STUDY ON THE BASIC CONTROL OF SPEED RATIO OF THE CVT SYSTEM USED FOR ELECTRIC VEHICLES

YILDIZ A., KOPMAZ O.

International Journal of Advances in Engineering and Technology , cilt.10, sa.2, ss.201-209, 2017 (Hakemli Dergi)

MATHEMATICAL MODELLING AND SIMULATION OF A TORSIONAL BAR ACTUATED TRUNK LID MECHANISM FOR A PASSENGER CAR

YILDIZ A., KOPMAZ O.

International Journal of Advances in Engineering and Technology , cilt.10, sa.1, ss.1-9, 2017 (Hakemli Dergi)

EXPERIMENTAL AND COMPUTATIONAL VALIDATION OF AN ANALYTICAL MODEL OF FREE VIBRATION OF A RECTANGULAR PLATE CARRYING A DISTRIBUTED MASS

YILDIZ A., KOPMAZ O.

International Journal of Advances in Engineering Technology , cilt.20, sa.2, ss.233-242, 2017 (Hakemli Dergi)

YARIM TORUS ŞEKİLLİ BİR SÜREKLİ DEĞİŞKEN AKTARMASİSTEMİNİN TASARIMI ANALİZİ VE İMALATI

YILDIZ A., KOPMAZ O.

Mühendis ve Makina , cilt.56, sa.671, ss.53-58, 2015 (Hakemli Dergi)

BİNEK ARAÇLARDA KULLANILAN GAZLI PİSTONLU BAGAJ KAPAĞI AÇMA KAPAMA MEKANİZMALARININ İNCELENMESİ

YILDIZ A., KOPMAZ O., Yusuf G.

Uludağ University Journal of The Faculty of Engineering , cilt.20, sa.2, ss.1-10, 2015 (Hakemli Dergi)

Toroidal Continuously Variable Transmission Systems Terminology and Present Studies

YILDIZ A., KOPMAZ O.

Uludağ University Journal of The Faculty of Engineering , cilt.19, sa.1, ss.59-80, 2014 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Kitaplar

Bilgisayar Destekli Mühendislik

YILDIZ A.

Medyay, 2022

Mühendislik Matematiği

KOPMAZ O., TELLİ ÇETİN S., YILDIZ A.

Dora Basım-Yayın Dağıtım Ltd.Şti., 2019

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

153

H-İndeks (Scopus)

Atıf (Diğer Toplam)

215

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Diğer Toplam)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim