Prof. Dr. AGAH UĞUZ | AVESİS

Akademik Veri Yönetim Sistemi

Yayınlar & Eserler

Makaleler 28

1. Investigating the Effects of Cutting Methods for Aluminum Metallic Foams

Bakirci A., Sigirtmac T., ÇAKIR M. C., UĞUZ A.

INGENIERIA E INVESTIGACION , cilt.44, sa.3, 2024 (SCI-Expanded)

2. Joining AlSi10Mg plates produced by additive manufacturing with MIG method and optimization of welding parameters Eklemeli imalat ile üretilen AlSi10Mg plakalarının MIG yöntemiyle birleştirilmesi ve kaynak parametrelerinin optimizasyonu

Işılak C., Ünal G., Yılmazoğlu G., Üzel U., Durgut R., UĞUZ A.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.40, sa.1, ss.573-586, 2024 (SCI-Expanded)

Creative Commons License

3. Determination of mechanical behavior of metal-rubber compound pulley part, finite element analysis and verification with tests

UĞUZ A., Penekli U.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, sa.4, ss.2113-2123, 2020 (SCI-Expanded)

4. Araçlarda Kullanılan Emniyet Kemerlerinin Kaza Anında İnsan Sağlığına Olan Olumsuz Etkilerinin Azaltılması için bir Sistem Geliştirilmesi

Sümer R. O., GÜLÇİMEN ÇAKAN B., ÇAKIR M. C., UĞUZ A.

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.24, sa.3, 2019 (Hakemli Dergi)

5. A comparative study of electrospinning process for two different collectors: The effect of the collecting method on the nanofiber diameters

Cavdar F. Y., UĞUZ A.

MECHANICAL ENGINEERING JOURNAL , cilt.6, sa.1, 2019 (ESCI)

6. Effect of Ethylene Oxide Autoclave and Ultra Violet Sterilizations on Surface Topography of PET Electrospun Fibres

DÜZYER Ş., HOCKENBERGER A., UĞUZ A., KAHVECİ Z.

Uludağ University Journal of the Faculty of Engineering , cilt.21, sa.2, ss.201-218, 2016 (Hakemli Dergi)

7. EFFECTS OF DIFFERENT STERILIZATION METHODS ON POLYESTER SURFACES

DÜZYER GEBİZLİ Ş., KORAL KOÇ S., HOCKENBERGER A., Evke E., KAHVECİ Z., UĞUZ A.

TEKSTIL VE KONFEKSIYON , cilt.23, sa.4, ss.319-324, 2013 (SCI-Expanded)

8. Effects of Welding Parameters on the Mechanical Properties of Inert Gas Welded 6063 Aluminum Alloys

Ertan T., Ertan R., UĞUZ A.

MATERIALS TESTING , cilt.54, sa.1, ss.13-18, 2012 (SCI-Expanded)

9. Tensile properties of friction stir welded joints of 2024 aluminum alloys in different heat-treated-state

Aydın H., Bayram A., Uğuz A., Akay S. K.

MATERIALS & DESIGN , cilt.30, sa.6, ss.2211-2221, 2009 (SCI-Expanded)

10. Abrasive and Sliding Wear Characteristics of Al-Si Cast Alloys Before and After Coating by Plasma Electrolytic Oxidation Process

AYDIN H., BAYRAM A., Uguz A.

MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION , cilt.50, sa.6, ss.318-325, 2008 (SCI-Expanded)

11. The observation of grain boundary phases in Al-Zn-Mg alloys containing dispersoids

UĞUZ A., BAYRAM A.

Metall , cilt.58, ss.44-46, 2004 (SCI-Expanded)

12. Modeling the effects of mechanical loads finite element modeling of ball joints under dynamic loading

Uguz A., Oka S.

Materialpruefung/Materials Testing , cilt.46, sa.10, ss.506-512, 2004 (SCI-Expanded)

13. Determination of the crystallographic parameters of a fcc metal by means of electron channelling patterns

Crystal Research and Technology , cilt.38, sa.6, ss.515-527, 2003 (SCI-Expanded)

14. The observation of grain boundary phases in Al-Zn-Mg alloys containing dispersoids

Uguz A., Bayram A.

METALL , cilt.58, ss.44-46, 2003 (SCI-Expanded)

15. Rapid determination of the fracture toughness of metallic materials using circumferentially notched bars

Bayram A., Uguz A., Durmus A.

Journal of Materials Engineering and Performance , cilt.11, sa.5, ss.571-576, 2002 (SCI-Expanded)

16. Effect of Si content and microstructure on the wear behaviour of Al-Si alloys

Uguz A., Bayram A.

Metall , cilt.55, sa.12, ss.758-761, 2001 (SCI-Expanded)

17. Effect of microstructure on the wear behaviour of a dual phase steel Einfluss der mikrostruktur auf das verschleissverhalten eines dualphasen-stahls

Bayram A., Uguz A.

Materialwissenschaft und Werkstofftechnik , cilt.32, sa.3, ss.249-252, 2001 (SCI-Expanded)

18. Effect of Microstructure on the Wear Behaviour of a Dual Phase Steel

BAYRAM A., UĞUZ A.

Materialwissenschaft und Werkstofftechnik , 2001 (SCI-Expanded)

19. The effect of spheroidising and Na-modification on the mechanical properties of Al-Si cast alloys

BAYRAM A. S., UĞUZ A.

Metall , cilt.53, sa.3, ss.131-134, 1999 (SCI-Expanded)

20. The effect of a notch on the tensile properties of a commercial 7075-Al alloy

Bayram A., Uguz A.

Metall , cilt.53, sa.9, ss.486-489, 1999 (SCI-Expanded)

21. Effects of microstructure and notches on the mechanical properties of dual-phase steels

Bayram A., Uguz A., Ula M.

Materials Characterization , cilt.43, sa.4, ss.259-269, 1999 (SCI-Expanded)

22. Plastic zone size measurement techniques for metallic materials

Uguz A., Martin J.

Materials Characterization , cilt.37, ss.105-118, 1996 (SCI-Expanded)

23. The effect of retrogression and re-ageing on the ductile fracture toughness of Al-Zn-Mg alloys containing different dispersoid phases

Uguz A., Martin J.

JOURNAL OF MATERIALS SCIENCE , cilt.30, sa.23, ss.5923-5926, 1995 (SCI-Expanded)

24. A note on stretch zones in an Al-Zn-Mg alloy

UĞUZ A., Martin J. W.

Materials Characterization , cilt.34, sa.3, ss.217-220, 1995 (SCI-Expanded)

25. Effect of additives on the microstructure and mechanical properties of commercial alumina ceramics

MISIRLI Z., UGUZ A., BAYKARA T.

Materials Characterization , cilt.33, sa.4, ss.329-341, 1994 (SCI-Expanded)

26. Plastic zone size measurements in Al-Zn-Mg alloys by means of selected area channelling patterns

Uguz A., Martin J.

Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques , cilt.83, sa.4, ss.270-275, 1992 (SCI-Expanded)

27. The measurement of grain boundary particle distributions in aged AlZnMg alloys

UGUZ A., MARTIN J.

Materials Characterization , cilt.27, sa.3, ss.147-156, 1991 (SCI-Expanded)

28. RAPID METHOD FOR THE DETERMINATION OF TEM FOIL THICKNESS

TEKIN A., UGUZ A., MARTIN J.

MATERIALS CHARACTERIZATION , cilt.25, sa.1, ss.99-107, 1990 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 7

1. FDM Yöntemiyle Üretilen PLA Malzemelerin Üretim Parametrelerinin Optimizasyonu

Mustafa S., MURAT D., ÇAKIR M. C., UĞUZ A.

12. Uluslararası GAP Zirvesi Bilimsel Araştırmalar Kongresi, Gaziantep, Türkiye, 29 Mayıs 2024, (Tam Metin Bildiri)

2. Reinforcement of a thermoplastic crash-box with aluminum foam and tie beams

ENSARİOĞLU C., GÜLÇİMEN ÇAKAN B., KÖLÜK H., REİS M., ÇELİK H., UĞUZ A., et al.

Academic Conference on Engineering, IT and Artificial Intelligence (AC-EITAI 2018), Prag, Çek Cumhuriyeti, 10 - 13 Ağustos 2018, ss.425-434, (Tam Metin Bildiri)

3. Biomechanical evaluation of a novel screwless posterior stabilization system: an experimental study

SALCI H., LEKESİZ H., ŞENAYSOY S., Karaca A. A., Çetin M., Canatan U., et al.

Second International Biomedical Engineering Congress, 24 - 27 Mayıs 2018, (Özet Bildiri)

4. Development of a thermoplastic crash-box reinforced with aluminum foam

ENSARİOĞLU C., GÜLÇİMEN ÇAKAN B., KÖLÜK H., REİS M., AKSEL L., UĞUZ A., et al.

International 9th Automotive Technologies Congress (OTEKON 2018), Bursa, Türkiye, 7 - 08 Mayıs 2018, (Tam Metin Bildiri)

5. Development of a Thermoplastic Crash-Box Reinforced with Aluminum Foam

ENSARİOĞLU C., GÜLÇİMEN ÇAKAN B., REİS M., Kölük H., AKSEL l., UĞUZ A., et al.

9th International Automotive Technologies Congress, Bursa, Türkiye, 7 - 08 Mayıs 2018, (Tam Metin Bildiri)

6. Development of Solar Cells on Textile Substrates

Koral Koç S., Düzyer Ş., Hockenberger A., Uğuz A., Tapan İ., Peksöz A., et al.

UTİB Turkish Textile and Clothing Sector VII. International R&D Brokerage Event, İstanbul, Türkiye, 27 - 29 Mayıs 2015, ss.757-758, (Özet Bildiri)

7. Cell proliferation on modified PET nanofiber mats

Düzyer Ş., Koral Koç S., Hockenberger A., Evke E., Kahveci Z., Uğuz A.

14th AUTEX World Textile Conference, Bursa, Türkiye, 26 - 28 Mayıs 2014, (Tam Metin Bildiri)

Metrikler

Yayın

49

Yayın (WoS)

27

Yayın (Scopus)

26

Atıf (WoS)

315

H-İndeks (WoS)

7

Atıf (Scopus)

378

H-İndeks (Scopus)

8

Atıf (Scholar)

27

H-İndeks (Scholar)

2

Proje

5

Fikri Mülkiyet

1

Tez Danışmanlığı

21

Açık Erişim

21

BM Sürdürülebilir Kalkınma Amaçları