Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Determination of mechanical behavior of metal-rubber compound pulley part, finite element analysis and verification with tests

UĞUZ A., Penekli U.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, sa.4, ss.2113-2123, 2020 (SCI-Expanded) identifier identifier

EFFECTS OF DIFFERENT STERILIZATION METHODS ON POLYESTER SURFACES

DÜZYER GEBİZLİ Ş., KORAL KOÇ S., HOCKENBERGER A., Evke E., KAHVECİ Z., UĞUZ A.
TEKSTIL VE KONFEKSIYON , cilt.23, sa.4, ss.319-324, 2013 (SCI-Expanded) identifier identifier

Effects of Welding Parameters on the Mechanical Properties of Inert Gas Welded 6063 Aluminum Alloys

Ertan T., Ertan R., UĞUZ A.
MATERIALS TESTING , cilt.54, sa.1, ss.13-18, 2012 (SCI-Expanded) identifier identifier

Tensile properties of friction stir welded joints of 2024 aluminum alloys in different heat-treated-state

Aydın H., Bayram A., Uğuz A., Akay S. K.
MATERIALS & DESIGN , cilt.30, sa.6, ss.2211-2221, 2009 (SCI-Expanded) identifier identifier

Abrasive and Sliding Wear Characteristics of Al-Si Cast Alloys Before and After Coating by Plasma Electrolytic Oxidation Process

AYDIN H., BAYRAM A., Uguz A.
MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION , cilt.50, sa.6, ss.318-325, 2008 (SCI-Expanded) identifier identifier

The observation of grain boundary phases in Al-Zn-Mg alloys containing dispersoids

UĞUZ A., BAYRAM A.
Metall , cilt.58, ss.44-46, 2004 (SCI-Expanded) identifier

Modeling the effects of mechanical loads finite element modeling of ball joints under dynamic loading

Uguz A., Oka S.
Materialpruefung/Materials Testing , cilt.46, sa.10, ss.506-512, 2004 (SCI-Expanded) identifier identifier

Determination of the crystallographic parameters of a fcc metal by means of electron channelling patterns

Uguz A.
Crystal Research and Technology , cilt.38, sa.6, ss.515-527, 2003 (SCI-Expanded) identifier identifier

The observation of grain boundary phases in Al-Zn-Mg alloys containing dispersoids

Uguz A., Bayram A.
METALL , cilt.58, ss.44-46, 2003 (SCI-Expanded) identifier

Rapid determination of the fracture toughness of metallic materials using circumferentially notched bars

Bayram A., Uguz A., Durmus A.
Journal of Materials Engineering and Performance , cilt.11, sa.5, ss.571-576, 2002 (SCI-Expanded) identifier identifier

Effect of Si content and microstructure on the wear behaviour of Al-Si alloys

Uguz A., Bayram A.
Metall , cilt.55, sa.12, ss.758-761, 2001 (SCI-Expanded) identifier identifier

Effect of Microstructure on the Wear Behaviour of a Dual Phase Steel

BAYRAM A., UĞUZ A.
Materialwissenschaft und Werkstofftechnik , 2001 (SCI-Expanded)

Effect of microstructure on the wear behaviour of a dual phase steel Einfluss der mikrostruktur auf das verschleissverhalten eines dualphasen-stahls

Bayram A., Uguz A.
Materialwissenschaft und Werkstofftechnik , cilt.32, sa.3, ss.249-252, 2001 (SCI-Expanded) identifier identifier

The effect of spheroidising and Na-modification on the mechanical properties of Al-Si cast alloys

BAYRAM A. S., UĞUZ A.
Metall , cilt.53, sa.3, ss.131-134, 1999 (SCI-Expanded) identifier

The effect of a notch on the tensile properties of a commercial 7075-Al alloy

Bayram A., Uguz A.
Metall , cilt.53, sa.9, ss.486-489, 1999 (SCI-Expanded) identifier identifier

Effects of microstructure and notches on the mechanical properties of dual-phase steels

Bayram A., Uguz A., Ula M.
Materials Characterization , cilt.43, sa.4, ss.259-269, 1999 (SCI-Expanded) identifier identifier

Plastic zone size measurement techniques for metallic materials

Uguz A., Martin J.
Materials Characterization , cilt.37, ss.105-118, 1996 (SCI-Expanded) identifier identifier

The effect of retrogression and re-ageing on the ductile fracture toughness of Al-Zn-Mg alloys containing different dispersoid phases

Uguz A., Martin J.
JOURNAL OF MATERIALS SCIENCE , cilt.30, sa.23, ss.5923-5926, 1995 (SCI-Expanded) identifier identifier

A note on stretch zones in an Al-Zn-Mg alloy

UĞUZ A., Martin J. W.
Materials Characterization , cilt.34, sa.3, ss.217-220, 1995 (SCI-Expanded) identifier identifier

Effect of additives on the microstructure and mechanical properties of commercial alumina ceramics

MISIRLI Z., UGUZ A., BAYKARA T.
Materials Characterization , cilt.33, sa.4, ss.329-341, 1994 (SCI-Expanded) identifier identifier

Plastic zone size measurements in Al-Zn-Mg alloys by means of selected area channelling patterns

Uguz A., Martin J.
Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques , cilt.83, sa.4, ss.270-275, 1992 (SCI-Expanded) identifier identifier

The measurement of grain boundary particle distributions in aged AlZnMg alloys

UGUZ A., MARTIN J.
Materials Characterization , cilt.27, sa.3, ss.147-156, 1991 (SCI-Expanded) identifier identifier

RAPID METHOD FOR THE DETERMINATION OF TEM FOIL THICKNESS

TEKIN A., UGUZ A., MARTIN J.
MATERIALS CHARACTERIZATION , cilt.25, sa.1, ss.99-107, 1990 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

A comparative study of electrospinning process for two different collectors: The effect of the collecting method on the nanofiber diameters

Cavdar F. Y., UĞUZ A.
MECHANICAL ENGINEERING JOURNAL , cilt.6, sa.1, 2019 (ESCI) identifier

Araçlarda Kullanılan Emniyet Kemerlerinin Kaza Anında İnsan Sağlığına Olan Olumsuz Etkilerinin Azaltılması için bir Sistem Geliştirilmesi

Sümer R. O., GÜLÇİMEN ÇAKAN B., ÇAKIR M. C., UĞUZ A.
Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.24, sa.3, 2019 (Hakemli Dergi)

Effect of Ethylene Oxide Autoclave and Ultra Violet Sterilizations on Surface Topography of PET Electrospun Fibres

DÜZYER Ş., HOCKENBERGER A., UĞUZ A., KAHVECİ Z.
Uludağ University Journal of the Faculty of Engineering , cilt.21, sa.2, ss.201-218, 2016 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Reinforcement of a thermoplastic crash-box with aluminum foam and tie beams

ENSARİOĞLU C., GÜLÇİMEN ÇAKAN B., KÖLÜK H., REİS M., ÇELİK H., UĞUZ A., et al.
Academic Conference on Engineering, IT and Artificial Intelligence (AC-EITAI 2018), Prag, Çek Cumhuriyeti, 10 - 13 Ağustos 2018, ss.425-434

Biomechanical evaluation of a novel screwless posterior stabilization system: an experimental study

SALCI H., LEKESİZ H., ŞENAYSOY S., Karaca A. A., Çetin M., Canatan U., et al.
Second International Biomedical Engineering Congress, 24 - 27 Mayıs 2018

Development of a thermoplastic crash-box reinforced with aluminum foam

ENSARİOĞLU C., GÜLÇİMEN ÇAKAN B., KÖLÜK H., REİS M., AKSEL L., UĞUZ A., et al.
International 9th Automotive Technologies Congress (OTEKON 2018), Bursa, Türkiye, 7 - 08 Mayıs 2018

Development of a Thermoplastic Crash-Box Reinforced with Aluminum Foam

ENSARİOĞLU C., GÜLÇİMEN ÇAKAN B., REİS M., Kölük H., AKSEL l., UĞUZ A., et al.
9th International Automotive Technologies Congress, Bursa, Türkiye, 7 - 08 Mayıs 2018

Development of Solar Cells on Textile Substrates

Koral Koç S., Düzyer Ş., Hockenberger A., Uğuz A., Tapan İ., Peksöz A., et al.
UTİB Turkish Textile and Clothing Sector VII. International R&D Brokerage Event, İstanbul, Türkiye, 27 - 29 Mayıs 2015, ss.757-758

Cell proliferation on modified PET nanofiber mats

Düzyer Ş., Koral Koç S., Hockenberger A., Evke E., Kahveci Z., Uğuz A.
14th AUTEX World Textile Conference, Bursa, Türkiye, 26 - 28 Mayıs 2014

Metrikler

Yayın

46

Atıf (WoS)

321

H-İndeks (WoS)

7

Atıf (Scopus)

363

H-İndeks (Scopus)

8

Proje

4

Fikri Mülkiyet

1

Tez Danışmanlığı

21

Açık Erişim

20
BM Sürdürülebilir Kalkınma Amaçları