Do&#231;. Dr. ONUR YEMENİCİ

Firatoglu Z. A., Yemenici O., UMUR H.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.46, sa.4, 2021 (SCI-Expanded)

Experimental and numerical investigation of the effect of horseshoe vortex legs on heat characteristics of the downstream region of a circular cylinder-wall junction

International Journal of Heat and Mass Transfer , cilt.180, 2021 (SCI-Expanded)

An experimental and numerical study of wind effects on a ground-mounted solar panel at different panel tilt angles and wind directions

YEMENİCİ O., Aksoy M. O.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS , cilt.213, 2021 (SCI-Expanded)

Experimental study of aerodynamic loads on ground-mounted solar panel arrays: The panel spacing and inclination angle effect

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.234, sa.17, ss.3380-3396, 2020 (SCI-Expanded)

Flow and heat transfer characteristics over rectangular blocked surfaces

Umur H., Yemenici O., Umur Y., Sakin A.

EXPERIMENTAL HEAT TRANSFER , cilt.30, sa.3, ss.192-204, 2017 (SCI-Expanded)

Experimental Aspects of Heat Transfer Enhancement over Various Flow Surfaces

Yemenici O., Firatoglu Z. A.

HEAT TRANSFER ENGINEERING , cilt.37, sa.5, ss.435-442, 2016 (SCI-Expanded)

Aerodynamic Analysis of a Passenger Car at Yaw Angle and Two-Vehicle Platoon

Altinisik A., YEMENİCİ O., UMUR H.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.137, sa.12, 2015 (SCI-Expanded)

Transitional boundary layer flow and heat transfer over blocked surfaces with influence of free stream velocity and block height

HEAT AND MASS TRANSFER , cilt.49, sa.11, ss.1637-1646, 2013 (SCI-Expanded)

An analysis of flow and heat transfer in separated flows over blocked surface

Yemenici O., Firatoglu Z. A.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.227, sa.C3, ss.481-491, 2013 (SCI-Expanded)

An experimental investigation of flow and heat transfer characteristics over blocked surfaces in laminar and turbulent flows

Yemenici O., Firatoglu Z. A., Umur H.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.55, sa.13-14, ss.3641-3649, 2012 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Yol tüneli yangınında duvar kaplamasının ısıl etkisinin sayısal incelenmesi

Yemenici O., B.

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.12, sa.4, ss.1282-1288, 2023 (Hakemli Dergi)

Farklı girdap üreteçlere sahip bir aracın aerodinamiğinin sayısal incelenmesi

Yemenici O., kasap h.

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.12, sa.2, ss.581-587, 2023 (Hakemli Dergi)

Aerodynamic mechanisms on a ground-mounted solar panel at different wind directions

FIRATOĞLU Z. A., IŞİKER Y., YEMENİCİ O., YEŞİLATA B.

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , 2020 (Hakemli Dergi)

A numerical study on centrifugal pump performance with the influence of non-Newtonian fluids

DÖNMEZ M., YEMENİCİ O.

International Journal Of Sciences , 2019 (Hakemli Dergi)

Fotovoltaik panel karakteristiklerini hesaplayan desktop tabanlı bir yazılım geliştirilmesi ve Şanlıurfa ili için örnekleme çalışması

Harran Üniversitesi Mühendislik Dergisi , 2018 (Hakemli Dergi) Sürdürülebilir Kalkınma

An experimental investigation of the flow over an automobile side rear view mirror

International Journal of Mechanical And Production Engineering , 2017 (Hakemli Dergi)

Effects of plastic material on cooling time in plastic injection molding

International Journal of Mechanical and Production Engineering , 2017 (Hakemli Dergi)

An analysis of cooling time in plastic injection moulding with influence of inlet temperature of cooling fluid

International Journal Of Mechanical and Production Engineering , 2016 (Hakemli Dergi)

Heat transfer enhancement using concave and ribbed surfaces in laminar flows

YEMENİCİ O., FIRATOĞLU Z. A.

International Journal of Advances in Mechanical and Civil Engineering , 2015 (Hakemli Dergi)

Bloklu yüzey üzerinde ayrılmış akışın incelenmesi

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , 2013 (Hakemli Dergi)

Türbülanslı akışta ısı transferinin bloklu yüzeyler ile arttırılması

YEMENİCİ O., FIRATOĞLU Z. A.

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , 2013 (Hakemli Dergi)

Numerical investigation of laminar and turbulent flows over ribbed surfaces

YEMENİCİ O., SAKİN A.

INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING TECHNOLOGY , 2013 (Hakemli Dergi)

Numerical investigation of heat transfer for laminar and turbulent flow over ribbed walls

YEMENİCİ O., SAKİN A.

INTERNATIONAL JOURNAL OF ENGINEERING AND ADVANCED TECHNOLOGY , 2013 (Hakemli Dergi)

Experimental ınvestigation of the flow field around NACA0012 airfoil

INTERNATIONAL JOURNAL OF SCIENCES , 2013 (Hakemli Dergi)

Pressure measurements of the flow over a rearview side mirror

INTERNATIONAL JOURNAL OF SCIENCES , 2013 (Hakemli Dergi)

Thermal characteristics of turbulent flows under the effects of rib curvature and Reynolds number

INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING TECHNOLOGY , 2013 (Hakemli Dergi)

Velocity turbulent intensity and pressure measurements in turbulent separated and curved flows

INTERNATIONAL JOURNAL OF ENGINEERING AND ADVANCED TECHNOLOGY , 2013 (Hakemli Dergi)

Heat transfer analysis of laminar flows over concave convex and ribbed surfaces

YEMENİCİ O., FIRATOĞLU Z. A., UMUR H.

INTERNATIONAL JOURNAL ON HEAT AND MASS TRANSFER – THEORY AND APPLICATIONS , 2013 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

DOĞAL HAVALANDIRMALI BİR YOL TÜNELİ YANGININDA DUVAR KAPLAMASI ETKİSİNİN SAYISAL OLARAK İNCELENMESİ

KÜÇÜK B., YEMENİCİ O.

2. INTERNATIONAL HASANKEYF SCIENTIFIC STUDIES AND INNOVATION CONGRESS, 25 Haziran 2022

Numerical investigation of aerodynamic characteristics of a passenger car with different vortex generators

Yemenici O., Kasap H.

Mediterranean International Conference on Research in Applied Sciences, Antalya, Türkiye, 22 - 24 Nisan 2022, ss.156

Yüzey geometrisinin enerji verimliliğine etkisi

GAPYENEV, Türkiye, 10 - 12 Mayıs 2018

Düzlemsel vakum tüplü bir termal kolektörün tasarımı

MEYVACI D., İZOL S., FIRATOĞLU Z. A., İLKHAN M. A., YEMENİCİ O.

GAPYENEV, Türkiye, 10 - 12 Mayıs 2018

Çalışma basıncının fan tipi bir sulama memesinin performansına etkisinin nümerik araştırılması

CAN A., MEYVACI D., FIRATOĞLU Z. A., YEMENİCİ O., UMUR H.

GAPYENEV, Türkiye, 10 - 12 Mayıs 2018

Numerical study of wind loads on a solar panel at different inclination angles

YEMENİCİ O., AKSOY M. O.

9th International Conference on Mechanical and Aerospace Engineering, 10 - 13 Temmuz 2018

An experimental investigation of the flow over an automobile side rear view mirror

International Conference on Recent Innovations in Engineering and Technology, 21 - 22 Temmuz 2017

Effects of plastic material on cooling time in plastic injection molding

International Academic Conference on Development in Science and Technology, 21 - 22 Mayıs 2017

An analysis of cooling time in plastic injection moulding with influence of inlet temperature of cooling fluid

International Conference on Recent Innovations in Engineering and Technology, 13 Nisan 2016

Heat transfer enhancement using concave and ribbed surfaces in laminar flows

ALTINIŞIK A., KÜÇÜKÇEKEN E., YEMENİCİ O., UMUR H.

International Conference on Recent Innovations in Engineering and Technology, 23 Ekim 2015

Gerçek Araç modeli üzerinde deneysel ve sayısal aerodinamik analizler

7. Otomotiv Teknolojileri Kongresi, Türkiye, 26 - 27 Mayıs 2014

An experimental study on the aerodynamics of a symmetrical airfoil with influence of Reynolds number and attack angle