Assoc. Prof. ONUR YEMENİCİ

Firatoglu Z. A., Yemenici O., UMUR H.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , vol.46, no.4, 2021 (SCI-Expanded)

Experimental and numerical investigation of the effect of horseshoe vortex legs on heat characteristics of the downstream region of a circular cylinder-wall junction

International Journal of Heat and Mass Transfer , vol.180, 2021 (SCI-Expanded)

An experimental and numerical study of wind effects on a ground-mounted solar panel at different panel tilt angles and wind directions

YEMENİCİ O., Aksoy M. O.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS , vol.213, 2021 (SCI-Expanded)

Experimental study of aerodynamic loads on ground-mounted solar panel arrays: The panel spacing and inclination angle effect

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , vol.234, no.17, pp.3380-3396, 2020 (SCI-Expanded)

Flow and heat transfer characteristics over rectangular blocked surfaces

Umur H., Yemenici O., Umur Y., Sakin A.

EXPERIMENTAL HEAT TRANSFER , vol.30, no.3, pp.192-204, 2017 (SCI-Expanded)

Experimental Aspects of Heat Transfer Enhancement over Various Flow Surfaces

Yemenici O., Firatoglu Z. A.

HEAT TRANSFER ENGINEERING , vol.37, no.5, pp.435-442, 2016 (SCI-Expanded)

Aerodynamic Analysis of a Passenger Car at Yaw Angle and Two-Vehicle Platoon

Altinisik A., YEMENİCİ O., UMUR H.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , vol.137, no.12, 2015 (SCI-Expanded)

Transitional boundary layer flow and heat transfer over blocked surfaces with influence of free stream velocity and block height

HEAT AND MASS TRANSFER , vol.49, no.11, pp.1637-1646, 2013 (SCI-Expanded)

An analysis of flow and heat transfer in separated flows over blocked surface

Yemenici O., Firatoglu Z. A.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , vol.227, no.C3, pp.481-491, 2013 (SCI-Expanded)

An experimental investigation of flow and heat transfer characteristics over blocked surfaces in laminar and turbulent flows

Yemenici O., Firatoglu Z. A., Umur H.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , vol.55, no.13-14, pp.3641-3649, 2012 (SCI-Expanded)

Articles Published in Other Journals

Aerodynamic mechanisms on a ground-mounted solar panel at different wind directions

FIRATOĞLU Z. A., IŞİKER Y., YEMENİCİ O., YEŞİLATA B.

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , 2020 (Peer-Reviewed Journal)

A numerical study on centrifugal pump performance with the influence of non-Newtonian fluids

DÖNMEZ M., YEMENİCİ O.

International Journal Of Sciences , 2019 (Peer-Reviewed Journal)

Fotovoltaik panel karakteristiklerini hesaplayan desktop tabanlı bir yazılım geliştirilmesi ve Şanlıurfa ili için örnekleme çalışması

Harran Üniversitesi Mühendislik Dergisi , 2018 (Peer-Reviewed Journal) Sustainable Development

An experimental investigation of the flow over an automobile side rear view mirror

International Journal of Mechanical And Production Engineering , 2017 (Peer-Reviewed Journal)

Effects of plastic material on cooling time in plastic injection molding

International Journal of Mechanical and Production Engineering , 2017 (Peer-Reviewed Journal)

An analysis of cooling time in plastic injection moulding with influence of inlet temperature of cooling fluid

International Journal Of Mechanical and Production Engineering , 2016 (Peer-Reviewed Journal)

Heat transfer enhancement using concave and ribbed surfaces in laminar flows

YEMENİCİ O., FIRATOĞLU Z. A.

International Journal of Advances in Mechanical and Civil Engineering , 2015 (Peer-Reviewed Journal)

Bloklu yüzey üzerinde ayrılmış akışın incelenmesi

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , 2013 (Peer-Reviewed Journal)

Türbülanslı akışta ısı transferinin bloklu yüzeyler ile arttırılması

YEMENİCİ O., FIRATOĞLU Z. A.

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , 2013 (Peer-Reviewed Journal)

Numerical investigation of laminar and turbulent flows over ribbed surfaces

YEMENİCİ O., SAKİN A.

INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING TECHNOLOGY , 2013 (Peer-Reviewed Journal)

Experimental ınvestigation of the flow field around NACA0012 airfoil

INTERNATIONAL JOURNAL OF SCIENCES , 2013 (Peer-Reviewed Journal)

Pressure measurements of the flow over a rearview side mirror

INTERNATIONAL JOURNAL OF SCIENCES , 2013 (Peer-Reviewed Journal)

Numerical investigation of heat transfer for laminar and turbulent flow over ribbed walls

YEMENİCİ O., SAKİN A.

INTERNATIONAL JOURNAL OF ENGINEERING AND ADVANCED TECHNOLOGY , 2013 (Peer-Reviewed Journal)

Thermal characteristics of turbulent flows under the effects of rib curvature and Reynolds number

INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING TECHNOLOGY , 2013 (Peer-Reviewed Journal)

Velocity turbulent intensity and pressure measurements in turbulent separated and curved flows

INTERNATIONAL JOURNAL OF ENGINEERING AND ADVANCED TECHNOLOGY , 2013 (Peer-Reviewed Journal)

Heat transfer analysis of laminar flows over concave convex and ribbed surfaces

YEMENİCİ O., FIRATOĞLU Z. A., UMUR H.

INTERNATIONAL JOURNAL ON HEAT AND MASS TRANSFER – THEORY AND APPLICATIONS , 2013 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

DOĞAL HAVALANDIRMALI BİR YOL TÜNELİ YANGININDA DUVAR KAPLAMASI ETKİSİNİN SAYISAL OLARAK İNCELENMESİ

KÜÇÜK B., YEMENİCİ O.

2. INTERNATIONAL HASANKEYF SCIENTIFIC STUDIES AND INNOVATION CONGRESS, 25 June 2022

Yüzey geometrisinin enerji verimliliğine etkisi

GAPYENEV, Turkey, 10 - 12 May 2018

Düzlemsel vakum tüplü bir termal kolektörün tasarımı

MEYVACI D., İZOL S., FIRATOĞLU Z. A., İLKHAN M. A., YEMENİCİ O.

GAPYENEV, Turkey, 10 - 12 May 2018

Çalışma basıncının fan tipi bir sulama memesinin performansına etkisinin nümerik araştırılması

CAN A., MEYVACI D., FIRATOĞLU Z. A., YEMENİCİ O., UMUR H.

GAPYENEV, Turkey, 10 - 12 May 2018

Numerical study of wind loads on a solar panel at different inclination angles

YEMENİCİ O., AKSOY M. O.

9th International Conference on Mechanical and Aerospace Engineering, 10 - 13 July 2018

An experimental investigation of the flow over an automobile side rear view mirror

International Conference on Recent Innovations in Engineering and Technology, 21 - 22 July 2017

Effects of plastic material on cooling time in plastic injection molding

International Academic Conference on Development in Science and Technology, 21 - 22 May 2017

An analysis of cooling time in plastic injection moulding with influence of inlet temperature of cooling fluid

International Conference on Recent Innovations in Engineering and Technology, 13 April 2016

Heat transfer enhancement using concave and ribbed surfaces in laminar flows

ALTINIŞIK A., KÜÇÜKÇEKEN E., YEMENİCİ O., UMUR H.

International Conference on Recent Innovations in Engineering and Technology, 23 October 2015

Gerçek Araç modeli üzerinde deneysel ve sayısal aerodinamik analizler

7. Otomotiv Teknolojileri Kongresi, Turkey, 26 - 27 May 2014

An experimental study on the aerodynamics of a symmetrical airfoil with influence of Reynolds number and attack angle