Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Performance Assessments of Organic Rankine Cycle With Internal Heat Exchanger Based on Exergetic Approach

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, vol.140, no.10, 2018 (Peer-Reviewed Journal) identifier identifier

THE EFFECT OF WATER VAPOR DIFFUSION RESISTANCE FACTOR OF INSULATION MATERIALS FOR OUTER WALLS ON CONDENSATION

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, vol.38, no.2, pp.15-23, 2018 (Peer-Reviewed Journal) identifier identifier

Economic thermal insulation thickness for pipes and ducts: A review study

RENEWABLE & SUSTAINABLE ENERGY REVIEWS, vol.30, pp.184-194, 2014 (Peer-Reviewed Journal) Sustainable Development identifier identifier

MATHEMATICAL MODELING OF HC EMISSIONS RELEASED by OIL FILM for GASOLINE and GASEOUS FUELS

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.29, no.2, pp.343-352, 2014 (Peer-Reviewed Journal) identifier identifier

OPTIMUM THERMAL INSULATION THICKNESSES AND PAYBACK PERIODS FOR BUILDING WALLS IN TURKEY

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, vol.33, no.2, pp.45-55, 2013 (Peer-Reviewed Journal) identifier

Determination of heating-cooling periods and annual energy requirements variations with respect to years

ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART A-ENERGY SCIENCE AND RESEARCH, vol.29, no.2, pp.801-810, 2012 (Peer-Reviewed Journal) Sustainable Development identifier identifier

DETERMINATION OF OPTIMUM THERMAL INSULATION THICKNESS CONSIDERING SOLAR RADIATION AND WALL ORIENTATION

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.27, no.2, pp.367-374, 2012 (Peer-Reviewed Journal) identifier identifier

A review of the economical and optimum thermal insulation thickness for building applications

RENEWABLE & SUSTAINABLE ENERGY REVIEWS, vol.16, no.1, pp.415-425, 2012 (Peer-Reviewed Journal) Sustainable Development identifier identifier

Technical and economic analysis of the problems observed in diesel engines with common rail injection systems in Turkey

ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART A-ENERGY SCIENCE AND RESEARCH, vol.28, no.2, pp.563-576, 2012 (Peer-Reviewed Journal) Sustainable Development identifier identifier

Exergy analysis of absorber using water/lithium bromide solution

HEAT AND MASS TRANSFER, vol.44, no.9, pp.1089-1097, 2008 (Peer-Reviewed Journal) identifier identifier

A study on residential heating energy requirement and optimum insulation thickness

RENEWABLE ENERGY, vol.33, no.6, pp.1164-1172, 2008 (Peer-Reviewed Journal) identifier identifier

The first and second law analysis of a lithium bromide/water coil absorber

ENERGY, vol.33, no.5, pp.804-816, 2008 (Peer-Reviewed Journal) identifier identifier

Effects of radiant temperature on thermal comfort

BUILDING AND ENVIRONMENT, vol.42, no.9, pp.3210-3220, 2007 (Peer-Reviewed Journal) identifier identifier

Determination of required core temperature for thermal comfort with steady-state energy balance method

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.33, pp.199-210, 2006 (Peer-Reviewed Journal) identifier identifier

Comparison of parallel and counter flow coil absorber performance

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.33, no.2, pp.211-223, 2006 (Peer-Reviewed Journal) identifier identifier

Thermal comfort during heating and cooling periods in an automobile

HEAT AND MASS TRANSFER, vol.41, pp.449-458, 2005 (Peer-Reviewed Journal) identifier identifier

Investigation of indoor thermal comfort under transient conditions

BUILDING AND ENVIRONMENT, vol.40, pp.165-174, 2005 (Peer-Reviewed Journal) identifier identifier

Evaluation of coil absorber performance

HEAT AND MASS TRANSFER, vol.40, no.12, pp.929-936, 2004 (Peer-Reviewed Journal) identifier identifier

Evaluating thermal environments for sitting and standing posture

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.30, pp.1179-1188, 2003 (Peer-Reviewed Journal) Sustainable Development identifier identifier

An experimental analysis of automotive air conditioning system

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.30, no.2, pp.273-284, 2003 (Peer-Reviewed Journal) identifier identifier

Articles Published in Other Journals

Determination of Proper Insulation Thickness for Building Walls Regarding Economic Consideration

International Research Journal of Advanced Engineering and Science, vol.3, no.4, pp.173-176, 2018 (Peer-Reviewed Journal)

ENERGY POTENTIAL OF ANIMAL BIOMASS IN TURKEY

European Journal of Technique, vol.8, no.2, pp.160-167, 2018 (Peer-Reviewed Journal)

INVESTIGATION OF DIFFERENT TURBULANCE MODELS ON THERMAL AND HYDRAULIC BEHAVIOUR OF AUTOMOTIVE COOLING SYSTEM

International Journal of Mechanical And Production Engineering, vol.5, no.9, pp.77-82, 2017 (Peer-Reviewed Journal)

A Study on The Parameters Affecting Insulation Thickness on External Wall of Buildings

International Journal of Mechanical and Production Engineering, vol.5, no.7, pp.81-84, 2017 (Peer-Reviewed Journal)

CFD Study of Heat Transfer and Pressure Drop Characteristics in Vehicle Radiators

International Journal of Mechanical And Production Engineering, vol.5, no.4, pp.66-70, 2017 (Peer-Reviewed Journal)

DETERMINATION OF OPTIMUM THERMAL INSULATION THICKNESSES CONSIDERING THE SEASONAL ENERGY REQUIREMENTS

International Journal of Mechanical And Production Engineering, vol.4, no.6, pp.71-75, 2016 (Peer-Reviewed Journal)

A study on determination of optimum thermal insulation thickness using life cycle cost analysis

International Journal of Advances in Mechanical and Civil Engineering, vol.3, no.6, pp.1-5, 2015 (Peer-Reviewed Journal)

Isıtma Süreci ve Optimum Yalıtım Kalınlığı Hesabı

Makina Mühendisleri Odası İstanbul Şubesi Tesisat Mühendisliği Dergisi, 2007 (Peer-Reviewed Journal)

Sürekli rejim enerji dengesi modeline göre ısıl konfor bölgeleri

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol.9, no.1, pp.23-30, 2003 (Peer-Reviewed Journal)

İçten yanmalı motorlarda enerji dağılımı ve kullanılabilirliği

Z.K.Ü. Karabük Teknik Eğitim Fakültesi Teknoloji Dergisi, vol.6, pp.23-34, 2003 (Peer-Reviewed Journal) Sustainable Development

İnsan vücudu için ısı dengesi ve ısıl konfor şartları

Dokuz Eylül Üniversitesi Fen ve Mühendislik Dergisi, vol.5, 2003 (Peer-Reviewed Journal)

Sürekli rejimde ısıl konfor şartlarının modellenmesi

Anadolu Üniversitesi Bilim ve Teknoloji Dergisi, vol.4, 2003 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

BURSA’DA BULUNAN ŞEBEKE BAĞLANTILI BİR PV GÜÇ SANTRALİNİN GÜNLÜK ELEKTRİK ÜRETİMİ

4th Anatolian Energy Symposium with International Participation, Edirne, Turkey, 18 - 20 April 2018, pp.1479-1485

ÜÇ ETKİLİ SOĞURMALI BİR SOĞUTMA SİSTEMİNİN TERMODİNAMİK TASARIMI

2. ULUSLARARASI MÜHENDİSLİKMİMARLIK VE TASARIM KONGRESİ, İstanbul, Turkey, 12 - 13 May 2017, pp.382-383

Thermoeconomic analysis of a trıgeneration system

International Conference on Energy and Thermal Engineering, 25 - 28 April 2017

Optımızatıon Of Insulatıon Thıckness For External Walls Consıderıng Dıfferent Clımatıc Condıtıons

International Conference on Innovative Engineering Technologies, Dubai, United Arab Emirates, 1 - 02 February 2017, pp.1-5

CFD study of heat transfer and pressure drop characteristics in vehicle radiators

International Conference on Innovative Engineering Technologies (ICIET), 1 - 02 February 2017

Marmara bölgesinin hayvansal biyokütle dağılımı

10. International Clean Energy Symposium, 24 - 26 October 2016, pp.158-163 Sustainable Development

MARMARA BÖLGESİNİN HAYVANSAL BİYOKÜTLE DAĞILIMI

10th International Clean Energy Symposium, İstanbul, Turkey, 24 - 26 October 2016, pp.158-163 Sustainable Development

INVESTIGATION ON DOUBLE EFFECT DUAL-HEATED ABSORPTION REFRIGERATION SYSTEM

XII. International HVACR Technology Symposium, İstanbul, Turkey, 31 March - 02 April 2016, pp.123-129

A study on determination of optimum thermal insulation thickness using life cycle cost analysis

19th International Conference on Recent Innovations in Engineering and Technology, New York, United States Of America, 23 - 25 October 2015, pp.14-18

HAVA SOĞUTMALI ÇİFT KADEMELİ ABSORBSİYONLU SOĞUTMA SİSTEMİNİN ENERJİ VE EKSERJİ ANALİZİ

TESKON 2015 / 12. ULUSAL TESİSAT MÜHENDİSLİĞİ KONGRESİ, İzmir, Turkey, 8 - 11 April 2015, pp.1137-1151

ABSORBSİYONLU SOĞUTMA SİSTEMİNİN SON KULLANICI KRİTERLERİNE GÖRE ENERJİ VE EKSERJİ ANALİZİ

İKSES'14 ULUSAL İKLİMLENDİRME SOĞUTMA EĞİTİMİ SEMPOZYUMU, Balıkesir, Turkey, 23 - 25 October 2014, pp.261-271

ABSORBSİYONLU SOĞUTMA SİSTEMLERİNİN TERMODİNAMİK ANALİZLERİNDE KULLANILANSİMÜLASYON YÖNTEMLERİNİN KARSILASTIRILMASI

2. Ulusal İklimlendirme Soğutma Eğitimi Sempozyumu ve Sergisi, Balıkesir, Turkey, 23 - 25 October 2014, pp.136-147

PROTOTYPING A NEW LIGHTWEIGHT PASSENGER SEAT

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, United States Of America, 15 - 21 November 2013 identifier identifier

LED Sistemlerinin Isıl Analizi ve Soğutma Sistemlerinin Tasarımı

Uludağ Üniversitesi Bilgilendirme ve Ar-Ge Günleri, Bursa, Turkey, 12 - 14 November 2013

A computer based analysis of single-stage vapor absorption refrigeration system

The Sixth International Exergy, Energy and Environment Symposium, Rize, Turkey, 1 - 04 July 2013, pp.543-553

Investigation of humidity effects on the thermal comfort and heat balance of the body

The Sixth International Exergy, Energy and Environment Symposium (IEEES-6), Kayseri, Turkey, 1 - 04 July 2013, pp.560-568

Bursa ili için güneş enerjisi kaynaklı soğutma sisteminin deneysel analizi

Uludağ Üniversitesi 1. Bilgilendirme ve AR-GE Günleri, Bursa, Turkey, 15 - 16 November 2011

Calculation of Thermal Comfort Zones with the Ambient Parameters

IEEES-1 The First International Exergy, Energy and Environment Symposium, Paris, France, 13 - 17 July 2003, pp.769-773

Exergy Analysis of a Lithium Bromide Water Absorption Refrigeration System

IEEES-1 The First International Exergy, Energy and Environment Symposium, France, 13 - 17 July 2003

Otomobil içinde ısıtma ve soğutma süreçlerinde ısıl konforun simülasyonu

OTEKON’02 Otomotiv Teknolojileri Kongresi, Bursa, Turkey, 24 - 26 June 2002, pp.161-0

Books & Book Chapters