Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

The Electroless Monolayer and Duplex Ni–B and Ni–P Coatings for 316L Stainless Steel in Synergistic Combination of Mechanical (Wear) and Chemical (Corrosion) Processes

MİNDİVAN F., MİNDİVAN H., BAYRAM A.
Advanced Engineering Materials , cilt.25, sa.10, 2023 (SCI-Expanded) identifier identifier

Single Track Geometry Prediction of Laser Metal Deposited 316L-Si Via Multi-Physics Modelling and Regression Analysis with Experimental Validation

Biyikli M., Karagoz T., Calli M., Muslim T., ÖZALP A. A., BAYRAM A.
METALS AND MATERIALS INTERNATIONAL , cilt.29, sa.3, ss.807-820, 2023 (SCI-Expanded) identifier identifier

Comparative evaluation of mechanical properties of short aramid fiber on thermoplastic polymers

Ari A., BAYRAM A., KARAHAN M., Arslan O.
MATERIALS SCIENCE-POLAND , cilt.41, sa.1, ss.161-176, 2023 (SCI-Expanded) Creative Commons License identifier identifier

Comparison of the mechanical properties of chopped glass, carbon, and aramid fiber reinforced polypropylene

Ari A., BAYRAM A., KARAHAN M., Karagoz S.
POLYMERS & POLYMER COMPOSITES , cilt.30, 2022 (SCI-Expanded) identifier identifier

Effect of tool pin profile on the hook geometry and mechanical properties of a friction stir spot welded AA6082-T6 aluminum alloy

AYDIN H., TUNÇEL O., Tutar M., BAYRAM A.
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING , cilt.45, sa.2, ss.233-248, 2021 (SCI-Expanded) identifier identifier

Effect of welding current on microstructure and mechanical properties of 15% deformed TWIP steel joined with electrical resistance spot welding

AYDIN H., Tutar M., Davut K., BAYRAM A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, sa.2, ss.803-817, 2020 (SCI-Expanded) identifier identifier identifier

Springback/Springforward Behaviour of DP Steels Used in the Automotive Industry

UMUR Y., AYDIN H., YİĞİT K., BAYRAM A.
TEHNICKI VJESNIK-TECHNICAL GAZETTE , cilt.27, sa.1, ss.243-250, 2020 (SCI-Expanded) identifier identifier

Strain Effect on the Microstructure, Mechanical Properties and Fracture Characteristics of a TWIP Steel Sheet

AYDIN H., Tutar M., BAYRAM A.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.71, sa.7, ss.1669-1680, 2018 (SCI-Expanded) identifier identifier

Effect of Weld Current on the Microstructure and Mechanical Properties of a Resistance Spot-Welded TWIP Steel Sheet

Tutar M., AYDIN H., BAYRAM A.
METALS , cilt.7, sa.12, 2017 (SCI-Expanded) identifier identifier

The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a Taguchi orthogonal array

Tutar M., AYDIN H., Yuce C., YAVUZ N., BAYRAM A.
MATERIALS & DESIGN , cilt.63, ss.789-797, 2014 (SCI-Expanded) identifier identifier

The hydro-abrasive erosion wear behavior of duplex-treated surfaces of AISI H13 tool steel

Tutar M., AYDIN H., DURMUŞ A., BAYRAM A., YİĞİT K.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES , cilt.57, sa.5, ss.1040-1051, 2014 (SCI-Expanded) identifier identifier

Effect of Rotational Speed and Dwell Time on Mechanical Properties of Dissimilar AA1050-AA3105 Friction Stir Spot Welded Joints

AYDIN H., Tuncel O., Yuce C., Tutar M., YAVUZ N., BAYRAM A.
MATERIALS TESTING , cilt.56, sa.10, ss.818-825, 2014 (SCI-Expanded) identifier identifier

Friction Characteristics of Nitrided Layers on AISI 430 Ferritic Stainless Steel Obtained by Various Nitriding Processes

AYDIN H., BAYRAM A., Topcu S.
MATERIALS SCIENCE-MEDZIAGOTYRA , cilt.19, sa.1, ss.19-24, 2013 (SCI-Expanded) identifier identifier

An investigation on microstructure and mechanical properties of post-weld heat-treated friction stir welds in aluminum alloy 2024-W

AYDIN H., BAYRAM A., Durgun I.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.227, ss.649-662, 2013 (SCI-Expanded) identifier identifier

Effect of different nitriding processes on the friction coefficient of 304 austenitic and 420 martensitic stainless steels

AYDIN H., BAYRAM A., Topcu S.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.65, sa.1, ss.27-36, 2013 (SCI-Expanded) identifier identifier

Effect of Welding Parameters on Tensile Properties and Fatigue Behavior of Friction Stir Welded 2014-T6 Aluminum Alloy

AYDIN H., Tutar M., DURMUŞ A., BAYRAM A., Sayaca T.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.65, sa.1, ss.21-30, 2012 (SCI-Expanded) identifier identifier

Effect of the microstructure on the notched tensile strength of as-cast and austempered ductile cast irons

DURMUŞ A., AYDIN H., Tutar M., BAYRAM A., YİĞİT K.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.226, ss.2214-2229, 2012 (SCI-Expanded) identifier identifier

APPLICATION OF GREY RELATION ANALYSIS (GRA) AND TAGUCHI METHOD FOR THE PARAMETRIC OPTIMIZATION OF FRICTION STIR WELDING (FSW) PROCESS

AYDIN H., BAYRAM A., EŞME U., KAZANÇOĞLU Y., GÜVEN O.
MATERIALI IN TEHNOLOGIJE , cilt.44, sa.4, ss.205-211, 2010 (SCI-Expanded) identifier identifier

The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir-welded joints

AYDIN H., BAYRAM A., Durgun I.
MATERIALS & DESIGN , cilt.31, sa.5, ss.2568-2577, 2010 (SCI-Expanded) identifier identifier

Influence of Welding Parameters on the Fatigue Behaviours of Friction Stir Welds of 3003-O Aluminum Alloys

AYDIN H., BAYRAM A., Yildirim M. T., YİĞİT K.
MATERIALS SCIENCE-MEDZIAGOTYRA , cilt.16, sa.4, ss.311-319, 2010 (SCI-Expanded) identifier identifier

Tensile properties of friction stir welded joints of 2024 aluminum alloys in different heat-treated-state

Aydın H., Bayram A., Uğuz A., Akay S. K.
MATERIALS & DESIGN , cilt.30, sa.6, ss.2211-2221, 2009 (SCI-Expanded) identifier identifier

Abrasive and Sliding Wear Characteristics of Al-Si Cast Alloys Before and After Coating by Plasma Electrolytic Oxidation Process

AYDIN H., BAYRAM A., Uguz A.
MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION , cilt.50, sa.6, ss.318-325, 2008 (SCI-Expanded) identifier identifier

The observation of grain boundary phases in Al-Zn-Mg alloys containing dispersoids

UĞUZ A., BAYRAM A.
Metall , cilt.58, ss.44-46, 2004 (SCI-Expanded) identifier

Effect of Microstructure on the Wear Behaviour of a Dual Phase Steel

BAYRAM A., UĞUZ A.
Materialwissenschaft und Werkstofftechnik , 2001 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

AISI 1050 ÇELİĞİ ÜZERİNE INCONEL 718 LAZER DOLGU KAYNAĞININ MORFOLOJİSİ, MİKROYAPISI VE MEKANİK KARAKTERİZASYONU

ARI A., Karagöz T., Arslan O., BAYRAM A.
Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.28, sa.2, ss.613-630, 2023 (Hakemli Dergi) Creative Commons License identifier

The optimisation of welding parameters for electrical resistance spot-welded TWIP steels using a Taguchi method

Tutar M., AYDIN H., BAYRAM A.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.24, sa.4, ss.650-657, 2018 (ESCI) identifier

SAC METAL ŞEKİLLENDİRME KALIPLARINDA KULLANILAN BİZMUT-KALAY DÖKÜM ALAŞIMLARININ MEKANİK ÖZELLİKLERİNİN İNCELENMESİ

DURGUN İ., YİĞİT K., AYDIN H., BAYRAM A.
Uludağ University Journal of The Faculty of Engineering , cilt.22, sa.3, ss.11-20, 2017 (Hakemli Dergi)

MECHANICAL PROPERTIES OF FRICTION STIR WELDED 3003 ALUMINUM ALLOY IN DIFFERENT WELDING CONDITIONS

AYDIN H., TUTAR M., YİĞİT K., BAYRAM A.
International Journal of Mechanical And Production Engineering , cilt.5, sa.12, ss.92-96, 2017 (Hakemli Dergi)

Multi objective Taguchi optimization approach for resistance spot welding of cold rolled TWIP steel sheets

TUTAR M., AYDIN H., BAYRAM A.
JOURNAL OF PHYSICS: CONFERENCE SERIES , cilt.885, sa.1, 2017 (Scopus) identifier

MECHANICAL PERFORMANCE OF FRICTION STIR SPOT WELDEDAA6082 T6 SHEETS

TUNÇEL O., AYDIN H., TUTAR M., BAYRAM A.
International Journal of Mechanical And Production Engineering , cilt.4, sa.1, ss.114-118, 2016 (Hakemli Dergi)

Einfluß der Belastungsrate auf das mechanische Verhalten von Verbundwerkstoffen aus Glasfasermatten und Epoxidharz

Bayram A., Yazıcı M., Korkmaz B.
Technische Textilien , cilt.42, sa.1, ss.47-52, 1999 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

30 DEFORME EDİLMİŞ TWIP ÇELİĞİNİN ELEKTRİK DİRENÇ PUNTA KAYNAĞINDA ELEKTROD BASKI KUVVETİNİN KAYNAK ÖZELLİKLERİ ÜZERİNDEKİ ETKİSİ

TUTAR M., AYDIN H., BAYRAM A.
9th International Automotive Technologies Congress, Otekon 2018, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.1392-1399

Tool Pin Geometry Effect on Fracture Characteristics of 6082-T6 Friction Stir Spot Welds in Lap Shear Test

TUNÇEL O., AYDIN H., TUTAR M., BAYRAM A.
2nd International Conference on Advanced Engineering Technologies, (ICADET 17), Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.434-444

Effect Of Weldıng Tıme On Weld Propertıes Of 30 Cold Rolled Twıp Steel Resıstance Spot Welds

AYDIN H., TUTAR M., BAYRAM A.
Istec 2017 Europe-ınternational Science And Technology Conference, Berlin, Almanya, 17 Temmuz 2017 - 19 Ocak 2018, ss.300-306

Multi Objective Taguchi Optimization Approach For Resistance Spot Welding Of Cold Rolled Twıp Steel Sheets

TUTAR M., AYDIN H., BAYRAM A.
The 6th International Conference On Manufacturing Engineering And Process, Lizbon, Portekiz, 27 - 29 Mayıs 2017, ss.53-57

Influence of Tool Pin Profile on Mechanical Properties of 6082-T6 Friction Stir Spot Welds

AYDIN H., TUNÇEL O., TUTAR M., BAYRAM A.
3rd International Conference on Engineering and Natural Science (ICENS 2017),Budapest, Hungary, May 2017, Budapest, Macaristan, 3 - 07 Mayıs 2017, ss.334-339

Multi objective Taguchi optimization approach for resistance spot welding of cold rolled TWIP steel sheets

Tutar M., AYDIN H., BAYRAM A.
6th International Conference on Manufacturing Engineering and Process (ICMEP), Lisbon, Portekiz, 27 - 29 Mayıs 2017, cilt.885 identifier identifier

Weld Current Effect on the Tensile Strength of Cold Rolled TWIP980 Steel Joints Welded by Resistance Spot Welding

AYDIN H., TUTAR M., BAYRAM A.
3th International Conference on Advanced Technology & Sciences ICAT'16, Konya, Türkiye, 1 - 03 Eylül 2016, ss.1247-1251

THE INFLUENCE OF WELDING TIME ON MECHANICAL PROPERTIES OF RESISTANCE SPOT WELDED TWIP STEELSHEETS

AYDIN H., TUTAR M., BAYRAM A.
XIII INTERNATIONAL SCIENTIFIC CONGRESS MACHINES. TECHNOLOGIES. MATERIALS. 2016 SUMMER SESSION, Varna, Bulgaristan, 14 - 17 Eylül 2016, cilt.24, ss.16-19

A COMPARISON OF FRICTION CHARACTERISTICS OF VARIOUS SURFACE TREATED HOT WORK TOOL STEEL

TUTAR M., BAYRAM A.
XIII INTERNATIONAL CONGRESS SUMMER SESSION “MACHINЕS.TECHNOLОGIES.MATERIALS”, Varna, Bulgaristan, 14 - 17 Eylül 2016

Otomotiv sanayinde kullanılan TWIP çeliğinin elektrik direnç punta kaynağında elektrod baskı kuvvetinin mekanik özelliklere etkisi

AYDIN H., TUTAR M., BAYRAM A.
OTEKON 2016 8. Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 23 - 24 Mayıs 2016

Weld Current Effect on the Mechanical Properties of Resistance Spot Welded TWIP980 Steel Sheets

TUTAR M., AYDIN H., BAYRAM A.
International Research Symposium on Recent Innovations in Engineering Science and Technology, Paris, Fransa, 9 - 10 Mart 2016, cilt.5, ss.12-17

Mechanical Performance Of Friction Stir Spot Welded AA6082 T6 Sheets

TUNÇEL O., AYDIN H., TUTAR M., BAYRAM A.
4th IASTEM International Conference, Amsterdam, Hollanda, 12 Kasım 2015, ss.62-66

Influence of Welding Parameters on Mechanical Properties And Microstructure of Friction Stir Spot Welded AA5754 Aluminium Alloys

TUTAR M., AYDIN H., YÜCE C., TUNÇEL O., YAVUZ N., BAYRAM A.
15th International Materials Symposium, IMSP 2014, 15 - 17 Ekim 2014

Influence of welding parameters on mechanical properties and microstructure of friction stir spot welded AA5754 Aluminium alloys

TUTAR M., AYDIN H., YÜCE C., TUNÇEL O., YAVUZ N., BAYRAM A.
15. International Materials Syposium, Denizli, Türkiye, 15 Ekim 2014

Farklı türdeki yüksek mukavemet çeliklerinin punta kaynağı ile birleştirilmesinde kaynak zamanı ve mekanik özellikler arasındaki korelasyonlar

AYDIN H., DURGUN İ., TUTAR M., BAYRAM A.
Otomotiv Teknolojileri Kongresi (OTEKON14), Bursa, Türkiye, 26 Mayıs 2014, cilt.1, ss.149

Effect of rotational speed and dwell time on mechanical properties of dissimilar AA1050-AA3105 joints produced by friction stir spot welding

AYDIN H., TUNÇEL O., YÜCE C., TUTAR M., YAVUZ N., BAYRAM A.
3rd International Conference on Welding Technologies and Exhibition, 21 - 23 Mayıs 2014

Effect of rotational speed and dwell time on mechanical properties of dissimilar AA1050-AA3105 joints produced by friction stir spot welding

AYDIN H., TUNÇEL O., YÜCE C., TUTAR M., YAVUZ N., BAYRAM A.
3. International Conference on Welding Technologies and Exhibition (ICWET 2014), Manisa, Türkiye, 21 Mayıs 2014

An Investigation on Surface and Electrical Properties of Electrical Discharge Machined AISI D2 ToolSteel

DURMUŞ A., BAYRAM A., GÜLÇİMEN ÇAKAN B., şenol g., AKAY S. K.
An Investigation on Surface and Electrical Properties of Electrical Discharge Machined AISI D2 ToolSteel, 24 - 28 Nisan 2013

Farklı İç Yapılara Sahip Küresel Grafitli Dökme Demirlerin Abrazif Aşınma Davranışlarının İncelenmesi

AYDIN H., BAYRAM A., Çalışoğlu İ., Balaban H.
5. Otomotiv Teknolojileri Kongresi OTEKON’10, Bursa-Türkiye, Türkiye, 7 - 08 Haziran 2010 Sürdürülebilir Kalkınma

Plazma Nitrürlemenin Sac Delme Kalıplarında Kullanılan Zımbaların Aşınma Davranışı Üzerindeki Etkisi

AYDIN H., BAYRAM A., Saraçoğlu M. H., TUTAR M., DURMUŞ A.
5. Otomotiv Teknolojileri Kongresi OTEKON’10, Bursa, Türkiye, 7 - 08 Haziran 2010, ss.43-50 Sürdürülebilir Kalkınma

Plazma nitrürlemenin sac delme kalıplarında kullanılan zımbaların aşınma davranışı üzerindeki etkisi

AYDIN H., SARAÇOĞLU M. H., DURMUŞ A., TUTAR M., BAYRAM A.
5. Otomotiv Teknolojileri Kongresi (OTEKON 2010), Bursa, Türkiye, 07 Haziran 2010, cilt.2010, ss.43-50 Sürdürülebilir Kalkınma

Effect of Morphology of Second Phase Martensite on the Deformation Characteristics of Dual Phase Steels

BAYRAM A., DURMUŞ A.
Third International Congress, Mechanical Engineering Technologies’01, 25 - 26 Haziran 2001

Dual Fazlı Çeliklerde Mikroyapının Mekanik Özelliklere Etkisi

BAYRAM A., DURMUŞ A.
3.GAP Mühendislik Kongresi, Türkiye, 24 - 26 Mayıs 2000, ss.173-180

Metrikler

Yayın

61

Atıf (WoS)

433

H-İndeks (WoS)

8

Atıf (Scopus)

497

H-İndeks (Scopus)

8

Proje

10

Tez Danışmanlığı

30

Açık Erişim

32
BM Sürdürülebilir Kalkınma Amaçları