Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Single Track Geometry Prediction of Laser Metal Deposited 316L-Si Via Multi-Physics Modelling and Regression Analysis with Experimental Validation

Biyikli M., Karagoz T., Calli M., Muslim T., ÖZALP A. A., BAYRAM A.
METALS AND MATERIALS INTERNATIONAL , cilt.29, sa.3, ss.807-820, 2023 (SCI-Expanded) identifier identifier

Experimental investigation of optimum thermal performance and pressure drop of water-based Al2O3, TiO2 and ZnO nanofluids flowing inside a circular microchannel

TOPUZ A., ENGİN T., ÖZALP A. A., Erdogan B., Mert S., Yeter A.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY , cilt.131, sa.3, ss.2843-2863, 2018 (SCI-Expanded) identifier identifier

A computational and experimental investigation of the metallisation effects on the thermal characteristics of an automotive exterior lighting lamp

Boduroglu S., ÖZALP A. A.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.71, ss.279-299, 2016 (SCI-Expanded) identifier identifier

Numerical modeling of the momentum and thermal characteristics of air flow in the intercooler connection hose

Uysal A., ÖZALP A. A., Korgavus A., Korgavus O.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.60, ss.811-824, 2012 (SCI-Expanded) identifier identifier

Laminar-transitional micropipe flows: energy and exergy mechanisms based on Reynolds number, pipe diameter, surface roughness and wall heat flux

Ozalp A. A.
HEAT AND MASS TRANSFER , cilt.48, sa.1, ss.17-34, 2012 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Laminar Boundary Layer Development Around a Circular Cylinder: Fluid Flow and Heat-Mass Transfer Characteristics

ÖZALP A. A., Dincer I.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME , cilt.132, sa.12, 2010 (SCI-Expanded) identifier identifier

Hydrodynamic-thermal boundary layer development and mass transfer characteristics of a circular cylinder in confined flow

ÖZALP A. A., Dincer I.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES , cilt.49, sa.9, ss.1799-1812, 2010 (SCI-Expanded) identifier identifier

Combined Effects of Pipe Diameter, Reynolds Number and Wall Heat Flux and on Flow, Heat Transfer and Second-Law Characteristics of Laminar-Transitional Micro-Pipe Flows

Ozalp A. A.
ENTROPY , cilt.12, sa.3, ss.445-479, 2010 (SCI-Expanded) identifier identifier

Entropy analysis of laminar-forced convection in a pipe with wall roughness

Ozalp A. A.
INTERNATIONAL JOURNAL OF EXERGY , cilt.6, sa.2, ss.249-275, 2009 (SCI-Expanded) identifier identifier

1st and 2nd Law Characteristics in a Micropipe: Integrated Effects of Surface Roughness, Heat Flux and Reynolds Number

Ozalp A. A.
HEAT TRANSFER ENGINEERING , cilt.30, sa.12, ss.973-987, 2009 (SCI-Expanded) identifier identifier

Roughness induced forced convective laminar-transitional micropipe flow: energy and exergy analysis

Ozalp A. A.
HEAT AND MASS TRANSFER , cilt.45, sa.1, ss.31-46, 2008 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Parallel effects of acceleration and surface heating on compressible flow: Simulation of an aerospace propulsion nozzle with a medium amount of surface wear

Ozalp A. A.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.53, sa.1, ss.3-12, 2007 (SCI-Expanded) identifier identifier

Fluid flow and heat transfer in transitional boundary layers: effects of surface curvature and free stream velocity

Umur H., Ozalp A. A.
HEAT AND MASS TRANSFER , cilt.43, sa.1, ss.7-15, 2006 (SCI-Expanded) identifier identifier

Slider-bearing design with micro-machined wavy-cavity: Parametric characterization of thermohydrodynamic-operation-scheme

Ozalp B. T., Ozalp A. A.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.20, sa.10, ss.1590-1606, 2006 (SCI-Expanded) identifier identifier

Optimum surface profile design and performance evaluation of inclined slider bearings

Ozalp A. A., Umur H.
CURRENT SCIENCE , cilt.90, sa.11, ss.1480-1491, 2006 (SCI-Expanded) identifier identifier

Nonadiabatic and frictional constant area duct flow: A visual software based simulation for compressible systems

Ozalp A. A.
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION , cilt.14, sa.1, ss.64-75, 2006 (SCI-Expanded) identifier identifier

Numerical analysis of choked converging nozzle flows with surface roughness and heat flux conditions

Ozalp A. A.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.31, ss.31-46, 2006 (SCI-Expanded) identifier identifier

A computational approach on the multitask optimization of inclined slider bearing performance with upper-surface-waviness

Ozalp B. T., Ozalp A. A.
LARGE-SCALE SCIENTIFIC COMPUTING , cilt.3743, ss.526-534, 2006 (SCI-Expanded) identifier identifier

A computational study to predict the combined effects of surface roughness and heat flux conditions on converging-nozzle flows

Ozalp A. A.
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING , cilt.29, sa.1, ss.67-80, 2005 (SCI-Expanded) identifier identifier

Laminar and turbulent forced convection in accelerating and decelerating curved flows

Umur H., Ozalp A. A.
CURRENT SCIENCE , cilt.87, sa.9, ss.1237-1244, 2004 (SCI-Expanded) identifier identifier

An interactive software package for the investigation of hydrodynamic-slider bearing-lubrication

Ozalp A. A., Ozel S.
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION , cilt.11, sa.3, ss.103-115, 2003 (SCI-Expanded) identifier identifier

An experimental investigation of the combined effects of surface curvature and streamwise pressure gradients both in laminar and turbulent flows

Ozalp A. A., Umur H.
HEAT AND MASS TRANSFER , cilt.39, sa.10, ss.869-876, 2003 (SCI-Expanded) identifier identifier

Flow and heat transfer measurements in laminar and turbulent convex surface boundary layers

Ozalp A. A., Umur H.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.29, sa.6, ss.841-851, 2002 (SCI-Expanded) identifier identifier

A computer-assisted approach to industrial gas turbine performance calculation

Ozalp A. A.
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION , cilt.7, sa.3, ss.171-179, 1999 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Dizel Enjektör Yakıt Deliğinin Aşındırıcı Akış ile İşlenmesi (AFM) Sonrası Kalıntı Macundan Temizlenmesine Yönelik Makinenin Geliştirilmesinde Kullanılacak Kompakt Isı Eşanjörü Tasarım Analizi

BÜYÜKBAYRAKTAR A., KINAGU H. M., ALTIN İ., ÖZALP A. A., ÖĞÜT E., SALİHOĞLU N. K., et al.
Avrupa Bilim ve Teknoloji Dergisi , sa.36, ss.243-254, 2022 (Hakemli Dergi)

Preparation And Stability Analysis Of Water Based Al2O3, Tio2 And Zno Nanofluids

TOPUZ A., ENGİN T., ÖZALP A. A., ERDOĞAN B., mert s., yeter a.
EJENS European Journal of Engineering and Natural Sciences , cilt.2, sa.1, ss.70-78, 2017 (Hakemli Dergi)

Yüksek Blokajlı Kanal İçinde Art Arda İki Silindir Etrafında Sürekli Laminer Akış İçin Isı ve Akış Karakteristiklerinin Nümerik Olarak İncelenmesi

GÜNEŞ N., ÖZALP A. A.
Mühendis ve Makina , cilt.56, sa.667, ss.53-63, 2015 (Hakemli Dergi)

YÜKSEK BLOKAJLI KANAL İÇİNDE ART ARDA İKİ SİLİNDİRETRAFINDA SÜREKLİ LAMİNER AKIŞ İÇİN ISI VE AKIŞKARAKTERİSTİKLERİNİN NÜMERİK OLARAK İNCELENMESİ

GÜNEŞ N., ÖZALP A. A.
MÜHENDİS VE MAKİNA , cilt.56, sa.667, ss.53-63, 2015 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

ACTIVE AIR GUIDE SHUTTER DESIGN AND DEVELOPMENT FOR A PASSENGER CAR

Balçık Y., Kahraman A., ÖZALP A. A., Güdü T.
OTEKON 2018, 7 - 08 Mayıs 2018

The Effects of Reynolds Number on the laminar flow past two tandem cylinders with High Blockage in a Channel

KARAGÖZ İ., GÜNEŞ N., ÖZALP A. A.
8th INTERNATIONAL ADVANCEDTECHNOLOGIES SYMPOSIUM, Elazığ, Türkiye, 19 - 22 Ekim 2017

Modelling of velocity profile and pressure drop of flowing water based nanofluids and pure water in the microchannels with CFD

TOPUZ A., ENGİN T., ÖZALP A. A., ERDOĞAN B., AYCAN O., YETER A.
2nd International Energy and Engineering Conference, Gaziantep, Türkiye, 12 - 13 Ekim 2017, ss.489-497

Modelling Of Velocity Profile And Pressure Drop Of Flowing Water Based Nanofluids And Pure Water In The Mıcrochannels With Cfd

ENGİN T., TOPUZ A., ÖZALP A. A., mert s., ERDOĞAN B., yeter a.
2nd International Energy And Engineering Conference, Gaziantep, Türkiye, 12 - 13 Ekim 2017

Modelling Of Cooling Load With Cfd According to Ethylene Glycol Pure Water By Using Nanofluid In The Automobile Radiators

TOPUZ A., ÖZALP A. A., ENGİN T., ERDOĞAN B., AYCAN O., yeter a.
2nd International Energy And Engineering Conference, Gaziantep, Türkiye, 12 - 13 Ekim 2017

Experımental Investıgatıon Of Coolıng Performance And Pressure Drop In A Car Radıator By Usıng Ethylene Glycol–Water Based Al2o3 Nanofluıd As Coolant

ENGİN T., TOPUZ A., ÖZALP A. A., mert s., ERDOĞAN B., yeter a.
InVEnT’2017 2nd International Conference on Viable Energy Trends, Helsinki, Finlandiya, 27 - 30 Nisan 2017

YÜKSEK BLOKAJLI KANAL İÇİNDE LAMİNERSÜREKLİ AKIŞ İÇİN ARD ARDA İKİ SİLİNDİRETRAFINDA AKIŞ VE ISIKARAKTERİSTİKLERİNİN NÜMERİK OLARAKİNCELENMESİ

GÜNEŞ N., ÖZALP A. A.
TESKON 2015 / SİMÜLASYON VE SİMÜLASYON TABANLI ÜRÜN GELİŞTİRME SEMPOZYUMU,İZMİR, Türkiye, 8 - 11 Nisan 2015

YÜKSEK BLOKAJ ETKİSİNDE ( b=0.6 ) ARD ARDA SİLİNDİRLER ETRAFINDAN LAMİNER AKIŞ İÇİN ISI VE AKIŞ KARAKTERİSTİKLERİNİN İNCELENMESİ

GÜNEŞ N., ÖZALP A. A.
ULUDAĞ ÜNİVERSİTESİ IV. BİLGİLENDİRME VE ARGE GÜNLERİ, Bursa, Türkiye, 11 - 13 Kasım 2014

Numerical Investigation of Heat and Flow Characteristics of Laminar Steady Flow across two Tandem Cylinders

KORUKÇU M. Ö., ÖZALP A. A.
7. International Ege Energy Symposium and Exhibition, Uşak, Türkiye, 18 - 20 Haziran 2014, ss.946-957

Otomobillerin Ön Ve Yan Camlarında Oluşan Buz Ve Buğu Probleminin Nümerik İncelenmesine Yönelik Bir Yazılımın Geliştirilmesi

ÖZALP B. T., ÖZALP A. A., ÇİÇEK E.
Otekon 2012 6. OTOMOTİV TEKNOLOJİLERİ KONGRESİ, Bursa, Türkiye, 04 Haziran 2012

Concave surface velocity and heat transfer measurements in accelerating and decelerating boundary layers

ÖZALP A. A., YEMENİCİ O., UMUR H.
1st Int. Exergy, Energy and Environment Symposium, 13 - 17 Temmuz 2003

Newtonian and non-Newtonian laminar,transitional and turbulent flows with eccentricity of unity

Umur H., Ozalp A. A.
2nd Trabzon International Energy and Environment Symposium, Trabzon, Türkiye, 26 - 29 Temmuz 1998, ss.391-395 identifier

Metrikler

Yayın

41

Atıf (WoS)

118

H-İndeks (WoS)

7

Atıf (Scopus)

129

H-İndeks (Scopus)

7

Proje

16

Fikri Mülkiyet

3

Tez Danışmanlığı

5

Açık Erişim

5
BM Sürdürülebilir Kalkınma Amaçları