Doç. Dr. MÜMİN TUTAR

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

A Comparative Evaluation of the Effects of Manufacturing Parameters on Mechanical Properties of Additively Manufactured PA and CF-Reinforced PA Materials

Tutar M.

Polymers , cilt.15, sa.1, 2023 (SCI-Expanded)

Effect of tool pin profile on the hook geometry and mechanical properties of a friction stir spot welded AA6082-T6 aluminum alloy

AYDIN H., TUNÇEL O., Tutar M., BAYRAM A.

TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING , cilt.45, sa.2, ss.233-248, 2021 (SCI-Expanded)

Effect of welding current on microstructure and mechanical properties of 15% deformed TWIP steel joined with electrical resistance spot welding

AYDIN H., Tutar M., Davut K., BAYRAM A.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, sa.2, ss.803-817, 2020 (SCI-Expanded)

The effect of duplex surface treatment on erosion performance of QRO 90 Supreme steel

Tutar M., AYDIN H., DURMUŞ A.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.44, sa.4, 2019 (SCI-Expanded)

Strain Effect on the Microstructure, Mechanical Properties and Fracture Characteristics of a TWIP Steel Sheet

AYDIN H., Tutar M., BAYRAM A.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.71, sa.7, ss.1669-1680, 2018 (SCI-Expanded)

Effect of Weld Current on the Microstructure and Mechanical Properties of a Resistance Spot-Welded TWIP Steel Sheet

Tutar M., AYDIN H., BAYRAM A.

METALS , cilt.7, sa.12, 2017 (SCI-Expanded)

Effect of welding parameters on microstructure and mechanical properties of aluminum alloy AA6082-T6 friction stir spot welds

Aydin H., Tuncel O., Umur Y., Tutar M., Bayram A.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.24, sa.3, ss.215-227, 2017 (SCI-Expanded)

The Effect of Process Parameters on the Microstructure and Mechanical Performance of Fiber Laser-Welded AA5182 Aluminium Alloys

Yuce C., Tutar M., KARPAT F., YAVUZ N., Tekin G.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.63, sa.9, ss.510-518, 2017 (SCI-Expanded)

The Optimization of Process Parameters and Microstructural Characterization of Fiber Laser Welded Dissimilar HSLA and MART Steel Joints

Yuce C., Tutar M., KARPAT F., YAVUZ N.

METALS , cilt.6, sa.10, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a Taguchi orthogonal array

Tutar M., AYDIN H., Yuce C., YAVUZ N., BAYRAM A.

MATERIALS & DESIGN , cilt.63, ss.789-797, 2014 (SCI-Expanded)

The hydro-abrasive erosion wear behavior of duplex-treated surfaces of AISI H13 tool steel

Tutar M., AYDIN H., DURMUŞ A., BAYRAM A., YİĞİT K.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES , cilt.57, sa.5, ss.1040-1051, 2014 (SCI-Expanded)

Effect of Rotational Speed and Dwell Time on Mechanical Properties of Dissimilar AA1050-AA3105 Friction Stir Spot Welded Joints

AYDIN H., Tuncel O., Yuce C., Tutar M., YAVUZ N., BAYRAM A.

MATERIALS TESTING , cilt.56, sa.10, ss.818-825, 2014 (SCI-Expanded)

Effect of Welding Parameters on Tensile Properties and Fatigue Behavior of Friction Stir Welded 2014-T6 Aluminum Alloy

AYDIN H., Tutar M., DURMUŞ A., BAYRAM A., Sayaca T.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.65, sa.1, ss.21-30, 2012 (SCI-Expanded)

Effect of the microstructure on the notched tensile strength of as-cast and austempered ductile cast irons

DURMUŞ A., AYDIN H., Tutar M., BAYRAM A., YİĞİT K.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.226, ss.2214-2229, 2012 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

EYM ile Üretilen YMK Yapılı Numunelerde Kenar Genişliğinin Basma Dayanımı Üzerine Etkisinin Araştırılması

TUNÇEL O., TUTAR M.

Çukurova Üniversitesi Mühendislik Fakültesi dergisi , cilt.38, sa.3, ss.851-858, 2023 (Hakemli Dergi)

Investigation of the effect of process parameters in CO2 laser cutting of PMMA material by Response Surface Method

KURT E., KARAÇAY U. E., TUTAR M.

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.28, sa.2, ss.523-536, 2023 (Hakemli Dergi)

AISI 304 PASLANMAZ ÇELİĞİN ELEKTRİK DİRENÇ NOKTA KAYNAĞI PARAMETRELERİNİN TAGUCHI YÖNTEMİYLE ÇOK AMAÇLI OPTİMİZASYONU

COŞGUN ŞAHİN E., GÜLÇİMEN ÇAKAN B., TUTAR M., Şahin U. O.

Mühendislik Bilimleri ve Tasarım Dergisi , cilt.11, 2023 (Hakemli Dergi)

Investigation of the Mechanical Properties of St52 and S460MC Steels by Gas Welding

OKUROĞULLARI Y., ÇAVUŞOĞLU O., TUTAR M., AYDIN H.

International Journal of Automotive Science and Technology , cilt.6, sa.3, ss.221-225, 2022 (Hakemli Dergi)

Investigation of Mechanical Properties of St52 and S460MC Steels Joined by Gas Welding

Okuroǧullari Y., Çavuşoǧlu O., TUTAR M., AYDIN H.

International Journal of Automotive Science and Technology , cilt.6, sa.3, ss.221-225, 2022 (Scopus)

Investigation of mechanical properties of notched samples manufactured by additive manufacturing method under different impact velocities

TUTAR M.

Havacılık ve Uzay Teknolojileri Dergisi , cilt.14, sa.2, ss.127-131, 2021 (Hakemli Dergi)

The optimisation of welding parameters for electrical resistance spot-welded TWIP steels using a Taguchi method

Tutar M., AYDIN H., BAYRAM A.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.24, sa.4, ss.650-657, 2018 (ESCI)

MECHANICAL PROPERTIES OF FRICTION STIR WELDED 3003 ALUMINUM ALLOY IN DIFFERENT WELDING CONDITIONS

AYDIN H., TUTAR M., YİĞİT K., BAYRAM A.

International Journal of Mechanical And Production Engineering , cilt.5, sa.12, ss.92-96, 2017 (Hakemli Dergi)

Multi objective Taguchi optimization approach for resistance spot welding of cold rolled TWIP steel sheets

TUTAR M., AYDIN H., BAYRAM A.

JOURNAL OF PHYSICS: CONFERENCE SERIES , cilt.885, sa.1, 2017 (Scopus)

MECHANICAL PERFORMANCE OF FRICTION STIR SPOT WELDEDAA6082 T6 SHEETS

TUNÇEL O., AYDIN H., TUTAR M., BAYRAM A.

International Journal of Mechanical And Production Engineering , cilt.4, sa.1, ss.114-118, 2016 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Anizotrpy of Additively Manufactured Compression Samples

TUTAR M., TÜFEKCİ K.

10. International Congress on Engineering and Technology Management, İstanbul, Türkiye, 14 - 15 Ekim 2023, cilt.26, ss.322-331

Mechanical properties under compressive load of cross patterned PLA filament with different infill densities

TUTAR M.

EUROASIA Congress on Scientific Researches and Recent Trends-7, Baku, Azerbaycan, 6 - 09 Aralık 2020, cilt.3, ss.49-55

Investigation of mechanical properties of notched samples manufactured by additive manufacturing method under different impact velocities

TUTAR M.

İzmir Democracy University International Engineering Symposium (IDU-IES 2020), İzmir, Türkiye, 05 Aralık 2020, cilt.1, ss.123-124

The effect of infill pattern on mechanical properties of materials produced by fused deposition modeling

DİNDAR Ç., ALTAY M., TUTAR M., AYDIN H.

International Marmara Sciences Congress (IMASCON 2020 - Autumn), Kocaeli, Türkiye, 04 Aralık 2020, cilt.1, ss.464-470

An investigation into resonance frequency of a cylindrical Helmholtz resonator having same cavity volume but different diameter and length

TUTAR M., AYDIN T., TOSUN A.

6. Uluslararası Multidisipliner Çalışmaları Kongresi (MultiCongress 2019), Gaziantep, Türkiye, 26 Nisan 2019, cilt.1, ss.242

A parametric study on the effect of neck length and neck angle on the resonance frequency of a cylindrical Helmholtz resonator

TUTAR M., AYDIN T., YORUK O.

4th International Scientific Research Congress (UBAK 2019), Yalova, Türkiye, 14 Şubat 2019, cilt.1, ss.1115

Effect of anti-oxidant and cure system on the heat resistance of ACM rubber

SERTKOL KAVUS S., DONMEZ Z., AYDIN T., TUTAR M.

Rubbercon2018, İstanbul, Türkiye, 10 Mayıs 2018

30 DEFORME EDİLMİŞ TWIP ÇELİĞİNİN ELEKTRİK DİRENÇ PUNTA KAYNAĞINDA ELEKTROD BASKI KUVVETİNİN KAYNAK ÖZELLİKLERİ ÜZERİNDEKİ ETKİSİ

TUTAR M., AYDIN H., BAYRAM A.

9th International Automotive Technologies Congress, Otekon 2018, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.1392-1399

The development of a high performance rubber turbocharger hose: A case study

SERTKOL KAVUS S., DONMEZ Z., AYDIN T., TUTAR M.

3. International Conference On Advances in Mechanical Engineering (ICAME 2017), İstanbul, Türkiye, 19 Aralık 2017, cilt.1, ss.494-493

Tool Pin Geometry Effect on Fracture Characteristics of 6082-T6 Friction Stir Spot Welds in Lap Shear Test

TUNÇEL O., AYDIN H., TUTAR M., BAYRAM A.

2nd International Conference on Advanced Engineering Technologies, (ICADET 17), Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.434-444

Effect Of Weldıng Tıme On Weld Propertıes Of 30 Cold Rolled Twıp Steel Resıstance Spot Welds

AYDIN H., TUTAR M., BAYRAM A.

Istec 2017 Europe-ınternational Science And Technology Conference, Berlin, Almanya, 17 Temmuz 2017 - 19 Ocak 2018, ss.300-306

Multi Objective Taguchi Optimization Approach For Resistance Spot Welding Of Cold Rolled Twıp Steel Sheets

TUTAR M., AYDIN H., BAYRAM A.

The 6th International Conference On Manufacturing Engineering And Process, Lizbon, Portekiz, 27 - 29 Mayıs 2017, ss.53-57

Influence of Tool Pin Profile on Mechanical Properties of 6082-T6 Friction Stir Spot Welds

AYDIN H., TUNÇEL O., TUTAR M., BAYRAM A.

3rd International Conference on Engineering and Natural Science (ICENS 2017),Budapest, Hungary, May 2017, Budapest, Macaristan, 3 - 07 Mayıs 2017, ss.334-339

Mechanical Properties of Dissimilar 5754-H22/6082-T6 Aluminum Alloy Lap Joints by FSSW

TUNÇEL O., YİĞİT K., TUTAR M., AYDIN H.

3rd International Conference on Engineering and Natural Science (ICENS 2017), Budapest, Macaristan, 3 - 07 Mayıs 2017, ss.61-67

Multi objective Taguchi optimization approach for resistance spot welding of cold rolled TWIP steel sheets

Tutar M., AYDIN H., BAYRAM A.

6th International Conference on Manufacturing Engineering and Process (ICMEP), Lisbon, Portekiz, 27 - 29 Mayıs 2017, cilt.885

Weld Current Effect on the Tensile Strength of Cold Rolled TWIP980 Steel Joints Welded by Resistance Spot Welding

AYDIN H., TUTAR M., BAYRAM A.

3th International Conference on Advanced Technology & Sciences ICAT'16, Konya, Türkiye, 1 - 03 Eylül 2016, ss.1247-1251

THE INFLUENCE OF WELDING TIME ON MECHANICAL PROPERTIES OF RESISTANCE SPOT WELDED TWIP STEELSHEETS

AYDIN H., TUTAR M., BAYRAM A.

XIII INTERNATIONAL SCIENTIFIC CONGRESS MACHINES. TECHNOLOGIES. MATERIALS. 2016 SUMMER SESSION, Varna, Bulgaristan, 14 - 17 Eylül 2016, cilt.24, ss.16-19