Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Frontal impact sled testing of a new designed vehicle seat track bracket

INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 2021 (Peer-Reviewed Journal) identifier identifier

Stress-constrained infill optimization in additive manufacturing for the armrest of an office chair

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.36, no.4, pp.2209-2223, 2021 (Peer-Reviewed Journal) identifier identifier

Manufacture and Testing of Air Springs Used in Railway Vehicles

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, vol.44, no.9, pp.7967-7977, 2019 (Peer-Reviewed Journal) identifier identifier

The effect of duplex surface treatment on erosion performance of QRO 90 Supreme steel

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, vol.44, no.4, 2019 (Peer-Reviewed Journal) identifier identifier

Investigation of initial yielding in the small punch creep test

MATERIALS TESTING, vol.60, pp.701-706, 2018 (Peer-Reviewed Journal) identifier identifier

Effects of pressure and time on radial riveting process

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.33, no.1, pp.313-322, 2018 (Peer-Reviewed Journal) identifier identifier

The hydro-abrasive erosion wear behavior of duplex-treated surfaces of AISI H13 tool steel

SCIENCE CHINA-TECHNOLOGICAL SCIENCES, vol.57, no.5, pp.1040-1051, 2014 (Peer-Reviewed Journal) identifier identifier

Effect of the microstructure on the notched tensile strength of as-cast and austempered ductile cast irons

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, vol.226, pp.2214-2229, 2012 (Peer-Reviewed Journal) identifier identifier

Articles Published in Other Journals

Otomobil Sürücü Koltuğu Kızak Tasarımı ve Geliştirilmesi

U. Ü. Müh. Fak. Dergisi, vol.24, no.2, pp.633-642, 2019 (Peer-Reviewed Journal)

DİNAMİK YOL YÜKLERİNE MARUZ DONDURULMUŞ GIDA SAKLAMA KAPLARININ KIRILMA ANALİZİ

Uludağ University Journal of The Faculty of Engineering, vol.22, no.1, pp.213, 2017 (Peer-Reviewed Journal)

Dinamik Yol Yüklerine Maruz Dondurulmuş Gıda Saklama Kaplarının Kırılma Analizi

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, vol.22, no.1, pp.213-218, 2017 (Peer-Reviewed Journal)

Minyatür Zımba Testi ile Isı Tesiri Altında Kalan Bölgenin Sürünme Özelliklerinin Belirlenmesi

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, vol.21, no.1, pp.109-116, 2016 (Peer-Reviewed Journal)

Kauçuk Metal Yapışma Mukavemetinin Belirlenmesi

U. Ü. Müh.-Mim. Fak. Dergisi, vol.10, pp.33-39, 2005 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Shock Strength Investigation of Sintered Clutch Disc Hub Experimentally with Modified Charpy Test Bench

ICAIAME 2019 (International Conference on Artificial Intelligence and Applied Mathematics in Engineering 2019), Antalya, Turkey, 20 - 22 April 2019

Bir Binek Araç Far Gövdesinin Doğal FrekansTaramasında Fourier Dönüşüm Parametrelerinin Belirlenmesi

4. Uluslararası Bilimsel Araştırmalar Kongresi (UBAK), Yalova, Turkey, 14 - 17 February 2019, pp.169-178

Binek Araç Ön Koltuklarında Kullanılan Kızak Mekanizmasının Dayanım Doğrulama Metodolojisi

9th International Automotive Technologies Congress (OTEKON 2018), 7 - 08 May 2018, pp.1622-1627

Numerical Estimating the Shock Strength of Automobile Clutch Disc Hub

6th International Conference on Advances in Mechanical and Robotics Engineering - AMRE, Roma, Italy, 9 - 10 December 2017, pp.16-19

Ağır Ticari Araçlar İçin Yeni Nesil Statik Makas Sistemine Sahip Muavin Koltuğu Tasarımı

8. Otomotiv Teknolojileri Kongresi, Bursa, Turkey, 23 - 24 May 2016, pp.381-387

Raylı taşıtlardaki ikincil süspansiyon körüğü üretimi ve test edilmesi

Uludağ Üniversitesi IV. Bilgilendirme ve Ar-Ge Günleri, Bursa, Turkey, 11 - 13 November 2014

An Investigation on Surface and Electrical Properties of Electrical Discharge Machined AISI D2 ToolSteel

An Investigation on Surface and Electrical Properties of Electrical Discharge Machined AISI D2 ToolSteel, 24 - 28 April 2013

Determination of low temperature mechanical behaviour of the heat affected zone of a P91 steel weld using the small punch test technique

2nd International Conference on determination of mechanical properties of materials by small punch and other miniature testing techniques, Ostrava, Czech Republic, 2 - 04 October 2012

Determination of Low Temperature Mechanical Behaviour of the Heat Affected Zone of a P91 Steel Weld Using the Small Punch Test Technique

2nd International Conference SSTT on Determination of Mechanical Properties of Materials by Small Punch and other Miniature Testing Techniques, Ostrava, Czech Republic, 2 - 04 October 2012, pp.89-97 identifier

Tren körüğü imalatına yönelik yerlileştirme projesi

Uludağ Üniversitesi Bilgilendirme ve Ar-Ge Günleri, Bursa, Turkey, 15 - 16 November 2011

Tren Körüğü İmalatına Yönelik Yerlileştirme Projesi

Uludağ Üniversitesi Bilgilendirme ve Ar-Ge günleri, Bursa, Turkey, 15 - 16 November 2011, pp.77

Determination of the Ballistic Performance of a Cold Rolled Deep Drawing Sheet Metal

46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 18 - 21 April 2005, pp.1-9

Bakır Folyalarda Balistik Perforasyon

Savunma Teknolojileri Kongresi (SAVTEK 2004), Turkey, 24 - 25 June 2004, pp.21-30

Reçine Transfer Kalıplama Yöntemi ile Kompozit Parça Üretimi

Otomotiv Teknolojileri Kongresi, Turkey, 24 - 26 June 2002, pp.369-374

Effect of Morphology of Second Phase Martensite on the Deformation Characteristics of Dual Phase Steels

Third International Congress, Mechanical Engineering Technologies’01, 25 - 26 June 2001

Dual Fazlı Çeliklerde Mikroyapının Mekanik Özelliklere Etkisi

3.GAP Mühendislik Kongresi, Turkey, 24 - 26 May 2000, pp.173-180