Effect of Short-Time Double Aging on Microstructure, Wear Behavior, and Biocompatibility of Ti-Cu Alloy
JOM, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Basım Tarihi: 2026
- Doi Numarası: 10.1007/s11837-026-08899-x
- Dergi Adı: JOM
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, ABI/INFORM, Applied Science & Technology Source, Compendex, EMBASE, INSPEC, Engineering Source (EBSCO), Materials Science & Engineering Collection (ProQuest), Technology Collection (ProQuest)
- Bursa Uludağ Üniversitesi Adresli: Evet
Özet
The effects of short-time single- and double-stage aging on the microstructure, mechanical properties, wear behavior, and biological response of a Ti-10Cu alloy were investigated. Single-stage aging was performed at 400°C, 500°C, and 600°C for 3 h, while double-stage aging consisted of a 3-h first stage at 400°C, 500°C, or 600°C followed by a 3-h second stage at 300°C, 400°C, or 500°C. The microstructure consisted of an α-Ti matrix containing Ti2Cu precipitates. Increasing the aging temperature promoted Ti2Cu coarsening and increased α-Ti lamellar thickness and interlamellar spacing. Ti2Cu particle size increased from 0.25 μm in the solution-treated condition to 0.90 μm after DA-600/500°C, while its area fraction increased from ~ 4% to 21%. Aging increased hardness, reaching 365 HV after DA-500/400°C, which also exhibited the lowest mass loss of 5.4 mg, wear rate of 1.9 × 10−4 mm3/N m, and coefficient of friction of 0.36. Excessive thermal exposure caused Ti2Cu and lamellar coarsening, reducing strengthening and wear resistance. Cu-ion release increased with immersion time and was generally higher after 600°C aging. Cell viability and absorbance increased over 21 days, with DA-400/300°C showing the highest values.