Shock response of filled corrugated sandwich structures under extreme temperatures


Fahr P., YAZICI M., Shukla A.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS, cilt.20, sa.1, ss.130-149, 2018 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 20 Sayı: 1
  • Basım Tarihi: 2018
  • Doi Numarası: 10.1177/1099636216650987
  • Dergi Adı: JOURNAL OF SANDWICH STRUCTURES & MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.130-149
  • Anahtar Kelimeler: Shock, syntactic foam, high temperature, corrugated sandwich panel, digital image correlation, DYNAMIC-RESPONSE, SYNTACTIC FOAM, BEHAVIOR, STEEL, PANELS, HONEYCOMBS, DENSITY
  • Bursa Uludağ Üniversitesi Adresli: Evet

Özet

Shock tube experiments were performed to investigate the blast response of corrugated steel cellular core sandwich panels filled with a silicone based syntactic foam at room and high temperatures. The syntactic foam filler was prepared by mixing a two-part silicone mixture with glass microspheres; its microstructure, and mechanical properties were also characterized. The syntactic foam-filled sandwich panels were loaded via air shock pressure by using the shock tube with a fixture capable of testing materials at temperatures up to 900?. High-speed photo-optical methods, digital image correlation techniques, were used in tandem with optical band-pass filters and high intensity light sources for providing sufficient contrast at elevated temperatures. Back-face deformation images were captured using two synchronized high-speed cameras while a third camera captured the side view deformation images. The shock pressure profiles and digital image correlation analysis were used to obtain the impulse imparted to the specimen, transient deflection, in-plane strain and out-of-plane velocity of the back-face sheet. It was observed that using the syntactic foam as a filler material decreased the front face and back face deflections by 42% and 27%, respectively, as compared to the empty sandwich panel. At high temperatures, the silicone-based syntactic foam decomposes into silica, a stable and non-hazardous byproduct. The highest impulse was imparted to the specimen at room temperature and subsequently lower impulses with increasing temperatures were observed. Due to the increased ductility of steel at high temperatures, the specimens demonstrated an increase in back face deflection, in-plane strain and out-of-plane velocity with increased temperatures, with weld failure being the primary form of core damage.