Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Fatigue performances of helicopter gears

Kalay O. C., Yuce C., Doğan O., Yılmaz T. G., Karpat E., Kopmaz O., et al.
MATERIALS TESTING , cilt.65, sa.1, ss.52-62, 2023 (SCI-Expanded) identifier identifier

A Numerical Analysis of Hybrid Spur Gears with Asymmetric Teeth: Stress and Dynamic Behavior

YILMAZ T. G., KARADERE G., KARPAT F.
MACHINES , cilt.10, sa.11, 2022 (SCI-Expanded) Creative Commons License identifier identifier

A numerical investigation on the hybrid spur gears: Stress and dynamic analysis

Yılmaz T. G., Doğan O., Karpat F.
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , cilt.236, sa.1, ss.354-369, 2022 (SCI-Expanded) identifier identifier

A comparative experimental study on the impact strength of standard and asymmetric involute spur gears

Kalay O. C., Doğan O., YILMAZ T. G., Yüce C., KARPAT F.
MEASUREMENT , cilt.172, 2021 (SCI-Expanded) identifier identifier

Understanding the causes behind coracoid graft osteolysis in latarjet procedure (finite element analysis and comparison of three fixation methods)

Alp N. B., DOĞAN O., YILMAZ T. G., Kalay O. C., Moussa A. A., KARPAT F., et al.
ORTHOPAEDICS & TRAUMATOLOGY-SURGERY & RESEARCH , cilt.106, sa.1, ss.53-59, 2020 (SCI-Expanded) identifier identifier identifier

A comparative numerical study of forged bi-metal gears: Bending strength and dynamic response

YILMAZ T. G., DOĞAN O., KARPAT F.
MECHANISM AND MACHINE THEORY , cilt.141, ss.117-135, 2019 (SCI-Expanded) identifier identifier

Stress analysis of involute spur gears with different parameters by finite element an graphical method

DOĞAN O., YILMAZ T. G., KARPAT F.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.33, sa.4, ss.1493-1504, 2018 (SCI-Expanded) identifier identifier

A Study of Lightweight Door Hinges of Commercial Vehicles Using Aluminum Instead of Steel for Sustainable Transportation

YILMAZ T. G., Tufekci M., KARPAT F.
SUSTAINABILITY , cilt.9, sa.10, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Investigation of surface pressure and elastic deformation on external and internal spur gear

Gullu E., YILMAZ T. G.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.32, sa.2, ss.585-591, 2017 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

EXPERIMENTAL AND NUMERICAL ANALYSIS OF MECHANICAL PROPERTIES OF CARBON FIBER-REINFORCED POLYMER GEARS

DEDE F., KALAY O., YILMAZ T. G., KARPAT F.
ACTA TECHNICA CORVINIENSIS – Bulletin of Engineering , 2023 (Hakemli Dergi)

Dengeli Gerilmeye Sahip Dişli Çark Çiftleri Üzerine Nümerik bir Araştırma

YILMAZ T. G., KARADERE G., KARPAT F.
Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.28, sa.1, 2023 (Hakemli Dergi)

FINITE ELEMENT STRESS AND MODAL ANALYSIS OFBIMETAL SPUR GEARS

Yılmaz T. G., Karpat F.
Uludağ University Journal of The Faculty of Engineering , cilt.24, sa.3, ss.339-346, 2019 (Hakemli Dergi)

The Effect of Tooth Thickness on Root Stress of Internal Spur Gear Mechanism

Yılmaz T. G., Karpat F.
International Research Journal of Engineering and Technology , cilt.6, sa.11, ss.2079-2083, 2019 (Hakemli Dergi)

HİDRODİNAMİK RADYAL KAYMALI YATAK PERFORMANSININ FARKLI SINIR ŞARTLARI İÇİN İNCELENMESİ

GÜLLÜ E., YILMAZ T. G.
Uludağ University Journal of The Faculty of Engineering , cilt.23, sa.3, ss.37-48, 2018 (Hakemli Dergi)

Effects of using cutter with asymmetric tip radius on root stress of thin and solid rimmed internal gear

Yılmaz T. G., Kalay O., Karpat F.
International Journal of Development Research , cilt.8, sa.7, ss.21463-21470, 2018 (Hakemli Dergi)

STRESS ANALYSIS OF THIN RIMMED ASYMMETRIC SPUR GEARS

Yılmaz T. G., Kalay O., Karpat F.
INTERNATIONAL JOURNAL OF ADVANCES ON AUTOMOTIVE AND TECHNOLOGY , cilt.2, sa.3, ss.143-150, 2018 (Hakemli Dergi)

RULMANLI YATAKLARDA ETKİLİ OLAN HERTZ BASINÇLARININ VE YUVARLANMA ELEMANLARINDA OLUŞAN DEFORMASYONLARIN ANALİZİ

GÜLLÜ E., YILMAZ T. G.
Uludağ University Journal of The Faculty of Engineering , cilt.23, sa.1, ss.111-126, 2018 (Hakemli Dergi)

KALIP YAYLARI İÇİN YORULMA TEST CİHAZI TASARIMI VE ANALİZİ

ÇAVDAR K., YILMAZ T. G.
Uludağ University Journal of The Faculty of Engineering , cilt.22, sa.3, ss.163-178, 2017 (Hakemli Dergi)

AN ALTERNATIVE METHOD TO SPECIFY UNDERCUT POINT OF INVOLUTE SPUR GEAR WITH LOW NUMBER TEETH

Yılmaz T. G., Yüce C., Karpat F.
International Journal of Mechanical and Production Engineering , cilt.9, sa.5, ss.96-99, 2017 (Hakemli Dergi)

Mathematical Modelling of Involute Spur Gears Manufactured by Rack Cutter

YILMAZ T. G., GÜLLÜ E.
Uludağ University Journal of The Faculty of Engineering , cilt.21, sa.1, ss.179-190, 2016 (Hakemli Dergi)

Design Optimization Of Aluminum Hinge Parts For Lightweight Vehicles Performance Durability And Manufacturability

Tüfekçi M., Karpat F., Yüce C., Doğan O., Yılmaz T. G., Kaya N.
International Journal of Mechanical and Production Engineering , cilt.3, sa.12, ss.11-18, 2015 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Hibrit Dişlilerde Süren Taraf Kavrama açısının Tek Diş Rijitliğine Etkilerinin İncelenmesi

YILMAZ T. G., KARADERE G., KARPAT F.
2nd International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 15 Ekim 2022

Süren taraf kavrama açısının hibrit dişlilerin oluşan gerilmelere etkileri

YILMAZ T. G., KARADERE G., KARPAT F.
International Conference on Global Practice of Multidiciplinary Scientific Studies, TİFLİS, Gürcistan, 24 Haziran 2022

EXPERIMENTAL AND NUMERICAL ANALYSIS OF MECHANICAL PROPERTIES OF CARBON FIBER-REINFORCED POLYMER GEARS

KARPAT F., DEDE F., YILMAZ T. G., KALAY O.
10th International Scientific Conference IRMES 2022, Belgrade, Sırbistan, 26 Mayıs 2022

STRESS ANALYSIS OF ADDITIVE MANUFACTURED LIGHTWEIGHT SPUR GEARS

YILMAZ T. G., Kalay O. C., KARPAT F., Ekwaro-Osire S.
ASME 2021 International Mechanical Engineering Congress and Exposition, IMECE 2021, Virtual, Online, 1 - 05 Kasım 2021, cilt.2A-2021 Sürdürülebilir Kalkınma identifier

AN INVESTIGATION ON THE DESIGN OF FORMATE AND GENERATE FACE MILLED HYPOID GEARS

Yılmaz T. G., Kalay O., Karpat F., Doğanlı M., Altıntaş E.
ASME IMECE 2020, Oregon, Amerika Birleşik Devletleri, 15 - 19 Kasım 2020 identifier

Bending Stress Analysis of Spur Gears with Different Tooth Root Radius

Kartal E., Doğan O., Yılmaz T. G., Turan K., Kalay O., Karpat F.
4. Uluslararası Bilim, Mühendislik ve Teknolojide Yeni Trendler Kongresi, Sankt-Peterburg, Rusya, 7 - 09 Temmuz 2020

A STUDY ON THE MODAL ANALYSIS OF SPUR GEARS

Turan K., Doğan O., Yılmaz T. G., Kalay O., Kartal E., Karpat F.
2nd INTERNATIONAL EUROPEAN CONFERENCE ONINTERDISCIPLINARY SCIENTIFIC RESEARCHES, Ankara, Türkiye, 4 - 05 Temmuz 2020

Effects of the design parameters on mesh stiffness of the spur gears

Kalay O., Doğan O., Yılmaz T. G., Turan K., Kartal E., Karpat F.
2nd INTERNATIONAL EUROPEAN CONFERENCE ONINTERDISCIPLINARY SCIENTIFIC RESEARCHES, Ankara, Türkiye, 4 - 05 Temmuz 2020

INTERFERENCE ANALYSIS OF SPUR GEARS WITH ASYMMETRIC TROCHOID

Yılmaz T. G., Karpat F.
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 17 - 19 Aralık 2019

AN ALTERNATIVE METHOD TO ELIMINATE UNDERCUT OF SPUR GEARS

Yılmaz T. G., Karpat F.
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 17 - 19 Aralık 2019

STRESS ANALYSIS OF INTERNAL SPUR GEARS WITH ASYMMETRIC TEETH

Yılmaz T. G., Karpat F.
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 17 - 19 Aralık 2019

Effects of Drive Side Pressure Angle on Gear Fatigue Crack Propagation Life for Spur Gears With Symmetric and Asymmetric Teeth

Karpat F., Doğan O., Yılmaz T. G., Yüce C., Kalay O., Karpat E., et al.
ASME IMECE 2019 Volume 9: Mechanics of Solids, Structures, and Fluids, Utah, Amerika Birleşik Devletleri, 11 - 14 Kasım 2019 identifier

FINITE ELEMENT ANALYSIS OF HUMAN SCAPULA COMPARISON OF SCREW, WEDGE PLATE, AND ENDOBUTTON FIXATION METHODS

KARPAT F., ALP N. B., KALAY O., DOĞAN O., YILMAZ T. G., Khandaker M., et al.
ASME IMECE 2019, SALT LAKE CITY, Amerika Birleşik Devletleri, 8 - 14 Kasım 2019

Stress and Mesh Stiffness Evaluation of Bimaterial Spur Gears

Karpat F., Yılmaz T. G., Doğan O., Kalay O.
ASME IMECE 2019 Volume 2B: Advanced Manufacturing, Utah, Amerika Birleşik Devletleri, 11 - 14 Kasım 2019 identifier

Bending Stress Comparison of Asymmetric and Asymmetric Trochoid Spur Gear

Yılmaz T. G., Karpat F., Kalay O.
Alternative Energy Sources, Materials Technologies (AESMT’19), Sofija, Bulgaristan, 3 - 04 Haziran 2019, ss.129-130

Influence of Root Geometry on Bending Stress for Involute Spur Gears

Yılmaz T. G., Karpat F.
7th International Conference on Mechanics and Industrial Engineering (ICMIE’xx18), Madrid, İspanya, 16 - 18 Ağustos 2018

Stress Analysis of Internal Gear Pairs with Unequal Tooth Thickness

Yılmaz T. G., Karpat F.
2018 9th International Conference on Mechanical and Aerospace Engineering (ICMAE), Budapest, Macaristan, 10 - 13 Temmuz 2018, ss.478-482

STRESS ANALYSIS OF THIN RIMMED ASYMMETRIC SPUR GEARS

Yılmaz T. G., Kalay O., Karpat F.
INTERNATIONAL CONFERENCE ON PROGRESSES IN AUTOMOTIVE TECHNOLOGIES, İstanbul, Türkiye, 10 - 12 Mayıs 2018, ss.74-81

A CASE STUDY: AN ALTERNATIVE APPROACH TO WEIGHT REDUCTION OF SPUR GEAR PAIR WITH USING NON-STANDARD TOOTH THICKNESS

Yılmaz T. G., Karpat F.
9th International Automotive Technologies Congress-OTEKON 2018, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.731-736

IMPROVEMENT OF LOADING CAPACITY OF INTERNAL SPUR GEAR WITH USING ASYMMETRIC TROCHOID PROFILE

YILMAZ T. G., DOĞAN O., Yuce C., KARPAT F.
ASME International Mechanical Engineering Congress and Exposition, Tama, Japonya, 3 - 09 Kasım 2017 identifier

An Alternative Method to Specify Undercut Point of Involute Spur Gear with Low Number Teeth

Yılmaz T. G., Yüce C., Karpat F.
ISERD, 218th International Conference on Recent Innovations in Engineering and Technology (ICRIET), Florence, İtalya, 21 - 22 Temmuz 2017

Prototype Conveyor Line Monitoring System

Yüce C., Yılmaz T. G., Karpat F., Yavuz N.
ISERD, 218th International Conference on Recent Innovations in Engineering and Technology (ICRIET), Florence, İtalya, 21 - 22 Temmuz 2017

Stress Analysis of Thin Rimmed Spur Gear with Asymmetric Trochoid

Yılmaz T. G., Doğan O., Karpat F.
6TH INTERNATIONAL CONFERENCE ON MECHANICS AND INDUSTRIAL ENGINEERING (ICMIE’xx17), Rome, İtalya, 8 - 10 Haziran 2017

Entegre Bir Dişli Çark Tasarım Metodolojisinin Geliştirilmesi

Yılmaz T. G., Güllü E., Karpat F.
8.OTOMOTİV TEKNOLOJİLERİ KONGRESİ, Bursa, Türkiye, 23 - 24 Mayıs 2016

DESIGN AND ANALYSIS OF INTERNAL GEARS WITH DIFFERENT RIM THICKNESS AND SHAPES

KARPAT F., Ekwaro-Osire S., YILMAZ T. G., Dogan O., Yuce C.
ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015 identifier identifier

Otomobil Kapı Menteşesinin Bilgisayar Destekli Tasarımı Analizi ve Doğrulanması

TÜFEKÇİ M., YILMAZ T. G., YÜCE C., DOĞAN O., KARPAT F.
XIII. Otomotiv ve Yan Sanayi Sempozyumu ve Sergisi, İstanbul, Türkiye, 13 - 14 Kasım 2015, ss.33-41

Design Optimization of Aluminum Hinge Parts for Lightweight Vehicles Performance Durability and Manufacturability

TÜFEKÇİ M., KARPAT F., YÜCE C., DOĞAN O., YILMAZ T. G., KAYA N.
2015 IIER 19th International Conference on Recent Innovations in Engineering and Technology (ICRRIET2015), 23 Ekim 2015

Effect of Rim Thickness on Tooth Root Stress and Mesh Stiffness of Internal Gears

Karpat F., Engin B., Doğan O., Yüce C., Yılmaz T. G.
ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Kanada, 14 - 20 Kasım 2014, cilt.11

EFFECTS OF RIM THICKNESS ON TOOTH ROOT STRESS AND MESH STIFFNESS OF INTERNAL GEARS

KARPAT F., Engin B., Dogan O., Yuce C., YILMAZ T. G.
ASME International Mechanical Engineering Congress and Exposition (IMECE), Montreal, Kanada, 14 - 20 Kasım 2014 identifier identifier

EXPERIMENTAL VERIFICATION AND FINITE ELEMENT ANALYSIS OF AUTOMOTIVE DOOR HINGE

Dogan S., Guven C., KARPAT F., YILMAZ T. G., Dogan O.
ASME International Mechanical Engineering Congress and Exposition (IMECE2014), Montreal, Kanada, 14 - 20 Kasım 2014 identifier

Otobüs Koltuğu Geliştirilmesi

ERASLAN M., CİBELEK N., POLAT E., KONAK C., AYDOĞDU K., YILMAZ T. G., et al.
7. OTOMOTİV TEKNOLOJİLERİ KONGRESİ, Bursa, Türkiye, 26 - 27 Mayıs 2014

Kitap & Kitap Bölümleri

Biofabrication techniques for neural tissue engineering

Khandaker M., Progri H., Kalay O. C., Yılmaz T. G., Yüce C., Karpat F.
Biomaterials for Neural Tissue Engineering, Oguzhan Gunduz,Mustafa Sengor,Cem Bulent Ustundag, Editör, Woodhead Publishing Limited , London, ss.269-313, 2023

A Comparison: Root Stress Analysis of Involute Spur Gear with Asymmetric Involute and Asymmetric Trochoid

YILMAZ T. G., KARPAT F.
INSAC Natural and Engineering Sciences, Mısır, Gizem Doç.Dr. Uzun, Mehmet, Dr., Editör, DUVAR YAYINEVİ, İzmir, ss.269-281, 2021

Metrikler

Yayın

54

Atıf (WoS)

90

H-İndeks (WoS)

6

Atıf (Scopus)

121

H-İndeks (Scopus)

7

Proje

4

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları