Thermodynamic analysis of basic and regenerative organic Rankine cycles using dry fluids from waste heat recovery


Creative Commons License

Ozdemir E., Kılıç M.

Journal of Thermal Engineering, cilt.4, sa.5, ss.2381-2393, 2018 (Scopus) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 4 Sayı: 5
  • Basım Tarihi: 2018
  • Doi Numarası: 10.18186/thermal.439288
  • Dergi Adı: Journal of Thermal Engineering
  • Derginin Tarandığı İndeksler: Scopus, TR DİZİN (ULAKBİM)
  • Sayfa Sayıları: ss.2381-2393
  • Anahtar Kelimeler: Energy, Exergy, Working Fluid, Organic Rankine Cycle, Regenerative Organic Rankine Cycle, PERFORMANCE ANALYSIS, WORKING FLUID, PARAMETRIC OPTIMIZATION, THERMOECONOMIC OPTIMIZATION, EXERGY ANALYSIS, POWER-PLANT, SELECTION, ORC
  • Bursa Uludağ Üniversitesi Adresli: Evet

Özet

© 2018 Yildiz Technical University.The organic Rankine cycle (ORC), which generates electric energy using low temperature heat sources, is a promising technology in energy production sector. The ORC, which uses an organic fluid with its lower boiling point and higher vapor pressure than water-steam as a working fluid. The thermal efficiency of an ORC showes the performance of system, depends on system compenents, working fluid and operating conditions. This paper presents an thermodynamics examination of basic ORC and regenerative ORC for waste heat recovery applications using dry organic fluids. R113, R114, R227ea, R245fa and R600a with the boiling points from -16 °C to 48 ° are selected in the analyses. The relationships between the ORC's performance parameters for basic and regenerative technologies and the properties of working fluids are evaluated based on various turbine inlet pressure values. Results show that regenerative ORC has higher thermal efficiency compared with basic ORC. Also, the thermal efficiency increases with the increment of the turbine inlet pressure for both basic ORC and regenerative ORC.